All good, thanks Pat On Thu, Aug 23, 2018 at 12:20 AM Pat <[email protected]> wrote:
> Most of it looks pretty good. Not bad for my first skin attempt :) > > I knew imperial to metric would be an issue, and I had tried my best to > plan for it. I didn't take timezones into consideration with my testing > though - for example noticed on your test site that the forecast row has > wrong borders and it's showing the weather for yesterday (for your > timezone). I'll take a look into that. > > I see my error with the records page conversion, so I'll have to issue an > update on that one later today. > > For DarkSky, I'll have to add the "units" flag. They have 6 different unit > types, so I'll have to update the setup guide too. Can't believe I missed > that one! > > I'll let you all know when I issue an update. Possibly late today (US > Eastern time) > > > On Wednesday, August 22, 2018 at 12:30:47 AM UTC-4, Colin Larsen wrote: >> >> Arrgh, typo - www.41south.net.nz >> >> Also found this on the records page, note the change from metric back to >> US units >> >> Highest Temperature 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 >> at 9:56 AM 21.1 °C >> Lowest Temperature -1.1 °C August 18, 2018 at 4:58 PM August 18, 2018 at >> 4:58 PM -1.1 °C >> Highest Heat Index 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 at >> 9:56 AM 21.1 °C >> Lowest Wind Chill 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 at >> 9:56 AM August 19, 2018 at 9:56 AM >> Largest Daily Temperature Range 40.0 °F August 19, 2018 >> (Min: 30.0°F - Max: 70.0°F ) August 19, 2018 >> (Min: 30.0°F - Max: 70.0°F ) 40.0 °F >> Smallest Daily Temperature Range 5.9 °F August 18, 2018 >> (Min: 30.0°F - Max: 35.9°F ) August 18, 2018 >> (Min: 30.0°F - Max: 35.9°F ) 5.9 °F >> >> On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen <[email protected]> wrote: >> >>> www.41south.net nz >>> >>> On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen <[email protected]> >>> wrote: >>> >>>> Ok working in test :) >>>> >>>> Couple of minor things with the Darksky forecast; >>>> >>>> I need to set the units to metric with kph wind - ?units=ca at the end >>>> of the query string, is there a place to do that? >>>> >>>> There doesn't appear to be a "windy" icon >>>> >>>> Otherwise so far so good. I haven't delved into mqtt just yet. >>>> >>>> Cheers >>>> Colin >>>> >>>> On Wed, Aug 22, 2018 at 1:11 PM Pat <[email protected]> wrote: >>>> >>>>> Not sure. It might be. Worth a try and see how it goes? >>>>> >>>>> On Tuesday, August 21, 2018 at 7:50:34 PM UTC-4, Colin Larsen wrote: >>>>>> >>>>>> CloudMQTT with 5 connections and 10Kbit/sec might not be enough then? >>>>>> I'll definitely look at setting up my own I think. Might even just whack >>>>>> it >>>>>> on a Pi zero or something to play with >>>>>> >>>>>> On Wed, Aug 22, 2018 at 11:26 AM Pat <[email protected]> wrote: >>>>>> >>>>>>> Sorry, meant to update that to say overlay=clouds if you wanted >>>>>>> clouds. >>>>>>> >>>>>>> On Tuesday, August 21, 2018 at 7:24:19 PM UTC-4, Pat wrote: >>>>>>>> >>>>>>>> MQTT can be the tricky bit because some of the freebies out there >>>>>>>> have limitations which your weewx may hit pretty quickly. If you're >>>>>>>> thinking of trying to host your own MQTT, I'm working on a write up >>>>>>>> for how >>>>>>>> mine is setup. >>>>>>>> >>>>>>>> I chose windy.com because it's free and you can do a fair amount >>>>>>>> of customization. Except for the map color - gray is the only option... >>>>>>>> Looks like you can only have wind, or cloud. The cloud option looks >>>>>>>> like it >>>>>>>> may show both actually. >>>>>>>> >>>>>>>> Change the lat/lon for your area, but the bit I changed (and got >>>>>>>> lucky with) was overlay=wind >>>>>>>> >>>>>>>> >>>>>>>> https://embed.windy.com/embed2.html?lat=-26.195&lon=138.560&zoom=5&level=surface&overlay=wind&menu=&message=&marker=&calendar=&pressure=&type=map&location=coordinates&detail=&detailLat=-26.195&detailLon=138.560&metricWind=default&metricTemp=default&radarRange=-1 >>>>>>>> >>>>>>>> You're not married to windy though, if you find another radar you >>>>>>>> like, you can use that instead. Just use the full HTML of <img src=" >>>>>>>> http://thesite/radar.gif";> or something and making sure the width >>>>>>>> and height matches the parameters for an easy swap out. >>>>>>>> >>>>>>>> >>>>>>>> On Tuesday, August 21, 2018 at 6:32:42 PM UTC-4, Colin Larsen wrote: >>>>>>>>> >>>>>>>>> I'm down in New Zealand so a few hours out with you. Just created >>>>>>>>> my Darksky account and reading about MQTT - so much to learn! >>>>>>>>> Hopefully in >>>>>>>>> the next few hours but will post my success (or otherwise). >>>>>>>>> >>>>>>>>> Thanks again - really looking forward to getting this up and >>>>>>>>> running. >>>>>>>>> >>>>>>>>> 1st question, can Windy.com be set to display wind/cloud rather >>>>>>>>> than the radar image? We don't get that down here in NZ yet >>>>>>>>> >>>>>>>>> On Wednesday, 22 August 2018 10:27:40 UTC+12, Pat wrote: >>>>>>>>>> >>>>>>>>>> Thanks! Have you got the skin setup? >>>>>>>>> >>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
![http://thesite/radar.gif"](http://thesite/radar.gif"){kind=link}