Hopefully all of your configurations are in weewx.conf. If so you can just download it and install it like before with wee_extension.
On Wed, Aug 22, 2018, 5:08 PM Colin Larsen <[email protected]> wrote: > What's the best way to update Pat? > > On Thu, 23 Aug 2018, 08:29 Pat, <[email protected]> wrote: > >> Just released 0.2. Give it a try when you can. >> >> >> https://github.com/poblabs/weewx-belchertown/releases/tag/weewx-belchertown-0.2 >> >> >> On Wednesday, August 22, 2018 at 4:14:07 PM UTC-4, Colin Larsen wrote: >>> >>> All good, thanks Pat >>> >>> On Thu, Aug 23, 2018 at 12:20 AM Pat <[email protected]> wrote: >>> >>>> Most of it looks pretty good. Not bad for my first skin attempt :) >>>> >>>> I knew imperial to metric would be an issue, and I had tried my best to >>>> plan for it. I didn't take timezones into consideration with my testing >>>> though - for example noticed on your test site that the forecast row has >>>> wrong borders and it's showing the weather for yesterday (for your >>>> timezone). I'll take a look into that. >>>> >>>> I see my error with the records page conversion, so I'll have to issue >>>> an update on that one later today. >>>> >>>> For DarkSky, I'll have to add the "units" flag. They have 6 different >>>> unit types, so I'll have to update the setup guide too. Can't believe I >>>> missed that one! >>>> >>>> I'll let you all know when I issue an update. Possibly late today (US >>>> Eastern time) >>>> >>>> >>>> On Wednesday, August 22, 2018 at 12:30:47 AM UTC-4, Colin Larsen wrote: >>>>> >>>>> Arrgh, typo - www.41south.net.nz >>>>> >>>>> Also found this on the records page, note the change from metric back >>>>> to US units >>>>> >>>>> Highest Temperature 21.1 °C August 19, 2018 at 9:56 AM August 19, >>>>> 2018 at 9:56 AM 21.1 °C >>>>> Lowest Temperature -1.1 °C August 18, 2018 at 4:58 PM August 18, 2018 >>>>> at 4:58 PM -1.1 °C >>>>> Highest Heat Index 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 >>>>> at 9:56 AM 21.1 °C >>>>> Lowest Wind Chill 21.1 °C August 19, 2018 at 9:56 AM August 19, 2018 >>>>> at 9:56 AM August 19, 2018 at 9:56 AM >>>>> Largest Daily Temperature Range 40.0 °F August 19, 2018 >>>>> (Min: 30.0°F - Max: 70.0°F ) August 19, 2018 >>>>> (Min: 30.0°F - Max: 70.0°F ) 40.0 °F >>>>> Smallest Daily Temperature Range 5.9 °F August 18, 2018 >>>>> (Min: 30.0°F - Max: 35.9°F ) August 18, 2018 >>>>> (Min: 30.0°F - Max: 35.9°F ) 5.9 °F >>>>> >>>>> On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen <[email protected]> >>>>> wrote: >>>>> >>>>>> www.41south.net nz >>>>>> >>>>>> On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Ok working in test :) >>>>>>> >>>>>>> Couple of minor things with the Darksky forecast; >>>>>>> >>>>>>> I need to set the units to metric with kph wind - ?units=ca at the >>>>>>> end of the query string, is there a place to do that? >>>>>>> >>>>>>> There doesn't appear to be a "windy" icon >>>>>>> >>>>>>> Otherwise so far so good. I haven't delved into mqtt just yet. >>>>>>> >>>>>>> Cheers >>>>>>> Colin >>>>>>> >>>>>>> On Wed, Aug 22, 2018 at 1:11 PM Pat <[email protected]> wrote: >>>>>>> >>>>>>>> Not sure. It might be. Worth a try and see how it goes? >>>>>>>> >>>>>>>> On Tuesday, August 21, 2018 at 7:50:34 PM UTC-4, Colin Larsen wrote: >>>>>>>>> >>>>>>>>> CloudMQTT with 5 connections and 10Kbit/sec might not be enough >>>>>>>>> then? I'll definitely look at setting up my own I think. Might even >>>>>>>>> just >>>>>>>>> whack it on a Pi zero or something to play with >>>>>>>>> >>>>>>>>> On Wed, Aug 22, 2018 at 11:26 AM Pat <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> Sorry, meant to update that to say overlay=clouds if you wanted >>>>>>>>>> clouds. >>>>>>>>>> >>>>>>>>>> On Tuesday, August 21, 2018 at 7:24:19 PM UTC-4, Pat wrote: >>>>>>>>>>> >>>>>>>>>>> MQTT can be the tricky bit because some of the freebies out >>>>>>>>>>> there have limitations which your weewx may hit pretty quickly. If >>>>>>>>>>> you're >>>>>>>>>>> thinking of trying to host your own MQTT, I'm working on a write up >>>>>>>>>>> for how >>>>>>>>>>> mine is setup. >>>>>>>>>>> >>>>>>>>>>> I chose windy.com because it's free and you can do a fair >>>>>>>>>>> amount of customization. Except for the map color - gray is the only >>>>>>>>>>> option... Looks like you can only have wind, or cloud. The cloud >>>>>>>>>>> option >>>>>>>>>>> looks like it may show both actually. >>>>>>>>>>> >>>>>>>>>>> Change the lat/lon for your area, but the bit I changed (and got >>>>>>>>>>> lucky with) was overlay=wind >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> https://embed.windy.com/embed2.html?lat=-26.195&lon=138.560&zoom=5&level=surface&overlay=wind&menu=&message=&marker=&calendar=&pressure=&type=map&location=coordinates&detail=&detailLat=-26.195&detailLon=138.560&metricWind=default&metricTemp=default&radarRange=-1 >>>>>>>>>>> >>>>>>>>>>> You're not married to windy though, if you find another radar >>>>>>>>>>> you like, you can use that instead. Just use the full HTML of <img >>>>>>>>>>> src=" >>>>>>>>>>> http://thesite/radar.gif";> or something and making sure the >>>>>>>>>>> width and height matches the parameters for an easy swap out. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Tuesday, August 21, 2018 at 6:32:42 PM UTC-4, Colin Larsen >>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> I'm down in New Zealand so a few hours out with you. Just >>>>>>>>>>>> created my Darksky account and reading about MQTT - so much to >>>>>>>>>>>> learn! >>>>>>>>>>>> Hopefully in the next few hours but will post my success (or >>>>>>>>>>>> otherwise). >>>>>>>>>>>> >>>>>>>>>>>> Thanks again - really looking forward to getting this up and >>>>>>>>>>>> running. >>>>>>>>>>>> >>>>>>>>>>>> 1st question, can Windy.com be set to display wind/cloud rather >>>>>>>>>>>> than the radar image? We don't get that down here in NZ yet >>>>>>>>>>>> >>>>>>>>>>>> On Wednesday, 22 August 2018 10:27:40 UTC+12, Pat wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks! Have you got the skin setup? >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. > > >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/GSrKZEiPqsc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
![http://thesite/radar.gif"](http://thesite/radar.gif"){kind=link}