Background:
I'm running weewx version 3.8.2-1
In my neighborhood I have at least two other neighbors who have Davis
stations which my Vantage Pro 2 console picks up. My ISS is set to
transmit on channel 3, and my console works perfectly with this
configuration. I also have a Davis Envoy with a USB DataLogger which is
what weewx is polling. Using wee_device I've attempted multiple times to
configure channel 3 as an ISS, and each time I run wee_device --info it
shows not configured. I also have weewx configured to poll Station 3
(iss_id = 3 in weewx.conf). When I run weewx I'm getting data from some
other station! So I'm at a loss as to what to do at this point...
Here is an example of wee_device:
$ sudo wee_device --set-transmitter-type=3,0
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.0.11 (weewx.drivers.vantage)
Proceeding will set channel 3 to type 0 (iss), repeater: none, active.
Are you sure you want to proceed (y/n)? y
Transmitter type for channel 3 set to 0 (iss), repeater: none, active.
$ sudo wee_device --info
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.0.11 (weewx.drivers.vantage)
Querying...
Davis Vantage EEPROM settings:
CONSOLE TYPE: Vantage Pro2
CONSOLE FIRMWARE:
Date: Nov 21 2016
Version: 3.63
CONSOLE SETTINGS:
Archive interval: 60 (seconds)
Altitude: 0 (foot)
Wind cup type: large
Rain bucket type: 0.01 inches
Rain year start: 1
Onboard time: 2018-10-30 21:39:22
CONSOLE DISPLAY UNITS:
Barometer: inHg
Temperature: degree_F
Rain: inch
Wind: mile_per_hour
CONSOLE STATION INFO:
Latitude (onboard): +37.6°
Longitude (onboard): -122.1°
Use manual or auto DST? AUTO
DST setting: N/A
Use GMT offset or zone code? GMT_OFFSET
Time zone code: N/A
GMT offset: -8.0 hours
Temperature logging: LAST
Retransmit channel: ON (255)
TRANSMITTERS:
Channel Receive Repeater Type
1 inactive none iss
2 active none (N/A)
3 active none (N/A)
4 active none (N/A)
5 active none (N/A)
6 active none (N/A)
7 active none (N/A)
8 active none (N/A)
RECEPTION STATS:
Total packets received: 0
Total packets missed: 0
Number of resynchronizations: 0
Longest good stretch: 0
Number of CRC errors: 0
BAROMETER CALIBRATION DATA:
Current barometer reading: 30.097 inHg
Altitude: 0 feet
Dew point: 50 F
Virtual temperature: 52 F
Humidity correction factor: 2.3
Correction ratio: 1.000
Correction constant: +0.000 inHg
Gain: 0.000
Offset: 10.000
OFFSETS:
Wind direction: +0 deg
Inside Temperature: +0.0 F
Inside Humidity: +0 %
Outside Temperature: +0.0 F
Outside Humidity: +0 %
Here are all settings from the "Vantage" section of my /etc/weewx/weewx.conf
[Vantage]
type = serial
port = /dev/ttyUSB0
host = 1.2.3.4
baudrate = 19200
tcp_port = 22222
tcp_send_delay = 0.5
iss_id = 3
timeout = 4
wait_before_retry = 1.2
max_tries = 4
model_type = 2
driver = weewx.drivers.vantage
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
