Thanks for sharing your link Scott, looks so good. I have received the station today and will mount it today too, I have configured the RPi as per your guidelines, edited the dhcpcd.conf file too, do i have to assign a manual IP to the eth0 interface? as I see it is still DHCP enabled.
On Monday, 21 January 2019 01:11:26 UTC+3, Scott Grayban wrote: > > This is my site http://www.nettletondistrict.com/Nettleton/ > > On Sunday, January 20, 2019 at 2:01:00 PM UTC-8, Adnan Mumtaz wrote: >> >> Sorry , I was a bit confused, I forgot with this I will make the RPi an >> AP where the station will connect to, so in that case I will install plain >> weewx and then follow your instructions and once I can see data being >> received I will work on different skins, more interested in Belchertown and >> also weather34 >> >> On Monday, 21 January 2019 00:05:18 UTC+3, Adnan Mumtaz wrote: >>> >>> Hi Scott, >>> >>> Received the RPi , installed the OS and installed WeeWX to test, >>> everything went smooth, then started reading the links you shared, tomorrow >>> I should be receiving my WS too hopefully it was held by customs :) >>> >>> Question, the link you shared with me has prerequisites , which are >>> straight but there is a link which takes to >>> https://github.com/matthewwall/weewx-interceptor , so the first step of >>> prerequisites should be to install weewx interceptor and then follow the >>> rest in the link, I understand the RPi will sniff data via WiFi and it will >>> have access to WAN using Ethernet connection, can you also share your >>> website. >>> >>> Thanks a lot, >>> Adnan >>> >>> On Wednesday, 16 January 2019 01:48:06 UTC+3, Scott Grayban wrote: >>>> >>>> I use this one https://smile.amazon.com/gp/product/B06XWMQ81P/ >>>> >>>> SanDisk Extreme 32GB microSDHC UHS-3 Card - SDSQXAF-032G-GN6MA >>>> >>>> On Tuesday, January 15, 2019 at 2:23:52 PM UTC-8, Adnan Mumtaz wrote: >>>>> >>>>> I am a Debian user , not a very advanced one but i have concepts, I am >>>>> dowloading the RPi Debian Lite version as I wouldnt need a desktop, what >>>>> size and brand SD would you recommend >>>>> >>>>> On Tuesday, 15 January 2019 22:38:12 UTC+3, Scott Grayban wrote: >>>>>> >>>>>> Sure but you shouldn't have any problems unless you don't know >>>>>> anything about linux. >>>>>> >>>>>> On Tuesday, January 15, 2019 at 11:35:11 AM UTC-8, Adnan Mumtaz wrote: >>>>>>> >>>>>>> Thanks a lot, ordered it. Will need your help again if i get stuck >>>>>>> in something. So kind of you. >>>>>>> >>>>>>> Regards, >>>>>>> Adnan >>>>>>> >>>>>>> On Tuesday, 15 January 2019 22:27:19 UTC+3, Scott Grayban wrote: >>>>>>>> >>>>>>>> This one >>>>>>>> https://saudi.souq.com/sa-en/raspberry-pi-3-model-b+-plus-32895409/i/ >>>>>>>> >>>>>>>> On Tuesday, January 15, 2019 at 11:09:11 AM UTC-8, Adnan Mumtaz >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Hi Scott, >>>>>>>>> >>>>>>>>> Bundle of thanks for sharing your hardwork, will you suggest which >>>>>>>>> RPi should I buy, I can find few available in a local e-store >>>>>>>>> https://saudi.souq.com/sa-en/raspberry-pi/s/?as=1 >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Adnan >>>>>>>>> >>>>>>>>> On Tuesday, 15 January 2019 21:37:41 UTC+3, Scott Grayban wrote: >>>>>>>>>> >>>>>>>>>> You also need to buy a Rpi from amazon or the UK Rpi store for >>>>>>>>>> this to work. https://www.raspberrypi.org/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tuesday, January 15, 2019 at 10:14:38 AM UTC-8, Adnan Mumtaz >>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>> Greetings from Saudi Arabia, >>>>>>>>>>> >>>>>>>>>>> I am an expat living and working in Riyadh, Saudi Arabia. I have >>>>>>>>>>> recently purchased Ambient Weather WS-2902A which I will be >>>>>>>>>>> receiving next >>>>>>>>>>> week, I have a domain and web hosting where I want to publish my >>>>>>>>>>> weather >>>>>>>>>>> using WeeWX (belchertown template). I am a systems engineer but far >>>>>>>>>>> from >>>>>>>>>>> programming since a very long time, I will appreciate if someone >>>>>>>>>>> can guide >>>>>>>>>>> me, I did search the forum and found few had issues and those who >>>>>>>>>>> had >>>>>>>>>>> success are not publishing details. >>>>>>>>>>> >>>>>>>>>>> Awaiting positive response . >>>>>>>>>>> >>>>>>>>>>> Thank you, >>>>>>>>>>> Adnan >>>>>>>>>>> >>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
