Looks good... I think it's outside. Have you read the manual ? It should have that info.
On Monday, January 21, 2019 at 9:27:24 AM UTC-8, Adnan Mumtaz wrote: > > Hi Scott, > > I am live https://riyadhweather.com/ , the station is not yet connected > properly its just lying on the roof only temp and humidity would be > correct. was wondering is the barometer is inside the display screen or > outside unit > > On Monday, 21 January 2019 15:27:07 UTC+3, Adnan Mumtaz wrote: >> >> Thanks for sharing your link Scott, looks so good. I have received the >> station today and will mount it today too, I have configured the RPi as per >> your guidelines, edited the dhcpcd.conf file too, do i have to assign a >> manual IP to the eth0 interface? as I see it is still DHCP enabled. >> >> On Monday, 21 January 2019 01:11:26 UTC+3, Scott Grayban wrote: >>> >>> This is my site http://www.nettletondistrict.com/Nettleton/ >>> >>> On Sunday, January 20, 2019 at 2:01:00 PM UTC-8, Adnan Mumtaz wrote: >>>> >>>> Sorry , I was a bit confused, I forgot with this I will make the RPi >>>> an AP where the station will connect to, so in that case I will install >>>> plain weewx and then follow your instructions and once I can see data >>>> being >>>> received I will work on different skins, more interested in Belchertown >>>> and >>>> also weather34 >>>> >>>> On Monday, 21 January 2019 00:05:18 UTC+3, Adnan Mumtaz wrote: >>>>> >>>>> Hi Scott, >>>>> >>>>> Received the RPi , installed the OS and installed WeeWX to test, >>>>> everything went smooth, then started reading the links you shared, >>>>> tomorrow >>>>> I should be receiving my WS too hopefully it was held by customs :) >>>>> >>>>> Question, the link you shared with me has prerequisites , which are >>>>> straight but there is a link which takes to >>>>> https://github.com/matthewwall/weewx-interceptor , so the first step >>>>> of prerequisites should be to install weewx interceptor and then follow >>>>> the >>>>> rest in the link, I understand the RPi will sniff data via WiFi and it >>>>> will >>>>> have access to WAN using Ethernet connection, can you also share your >>>>> website. >>>>> >>>>> Thanks a lot, >>>>> Adnan >>>>> >>>>> On Wednesday, 16 January 2019 01:48:06 UTC+3, Scott Grayban wrote: >>>>>> >>>>>> I use this one https://smile.amazon.com/gp/product/B06XWMQ81P/ >>>>>> >>>>>> SanDisk Extreme 32GB microSDHC UHS-3 Card - SDSQXAF-032G-GN6MA >>>>>> >>>>>> On Tuesday, January 15, 2019 at 2:23:52 PM UTC-8, Adnan Mumtaz wrote: >>>>>>> >>>>>>> I am a Debian user , not a very advanced one but i have concepts, I >>>>>>> am dowloading the RPi Debian Lite version as I wouldnt need a desktop, >>>>>>> what >>>>>>> size and brand SD would you recommend >>>>>>> >>>>>>> On Tuesday, 15 January 2019 22:38:12 UTC+3, Scott Grayban wrote: >>>>>>>> >>>>>>>> Sure but you shouldn't have any problems unless you don't know >>>>>>>> anything about linux. >>>>>>>> >>>>>>>> On Tuesday, January 15, 2019 at 11:35:11 AM UTC-8, Adnan Mumtaz >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Thanks a lot, ordered it. Will need your help again if i get stuck >>>>>>>>> in something. So kind of you. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Adnan >>>>>>>>> >>>>>>>>> On Tuesday, 15 January 2019 22:27:19 UTC+3, Scott Grayban wrote: >>>>>>>>>> >>>>>>>>>> This one >>>>>>>>>> https://saudi.souq.com/sa-en/raspberry-pi-3-model-b+-plus-32895409/i/ >>>>>>>>>> >>>>>>>>>> On Tuesday, January 15, 2019 at 11:09:11 AM UTC-8, Adnan Mumtaz >>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>> Hi Scott, >>>>>>>>>>> >>>>>>>>>>> Bundle of thanks for sharing your hardwork, will you suggest >>>>>>>>>>> which RPi should I buy, I can find few available in a local e-store >>>>>>>>>>> https://saudi.souq.com/sa-en/raspberry-pi/s/?as=1 >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> Adnan >>>>>>>>>>> >>>>>>>>>>> On Tuesday, 15 January 2019 21:37:41 UTC+3, Scott Grayban wrote: >>>>>>>>>>>> >>>>>>>>>>>> You also need to buy a Rpi from amazon or the UK Rpi store for >>>>>>>>>>>> this to work. https://www.raspberrypi.org/ >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Tuesday, January 15, 2019 at 10:14:38 AM UTC-8, Adnan Mumtaz >>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Greetings from Saudi Arabia, >>>>>>>>>>>>> >>>>>>>>>>>>> I am an expat living and working in Riyadh, Saudi Arabia. I >>>>>>>>>>>>> have recently purchased Ambient Weather WS-2902A which I will be >>>>>>>>>>>>> receiving >>>>>>>>>>>>> next week, I have a domain and web hosting where I want to >>>>>>>>>>>>> publish my >>>>>>>>>>>>> weather using WeeWX (belchertown template). I am a systems >>>>>>>>>>>>> engineer but far >>>>>>>>>>>>> from programming since a very long time, I will appreciate if >>>>>>>>>>>>> someone can >>>>>>>>>>>>> guide me, I did search the forum and found few had issues and >>>>>>>>>>>>> those who had >>>>>>>>>>>>> success are not publishing details. >>>>>>>>>>>>> >>>>>>>>>>>>> Awaiting positive response . >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you, >>>>>>>>>>>>> Adnan >>>>>>>>>>>>> >>>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
