Hi Scott, I am live https://riyadhweather.com/ , the station is not yet connected properly its just lying on the roof only temp and humidity would be correct. was wondering is the barometer is inside the display screen or outside unit
On Monday, 21 January 2019 15:27:07 UTC+3, Adnan Mumtaz wrote: > > Thanks for sharing your link Scott, looks so good. I have received the > station today and will mount it today too, I have configured the RPi as per > your guidelines, edited the dhcpcd.conf file too, do i have to assign a > manual IP to the eth0 interface? as I see it is still DHCP enabled. > > On Monday, 21 January 2019 01:11:26 UTC+3, Scott Grayban wrote: >> >> This is my site http://www.nettletondistrict.com/Nettleton/ >> >> On Sunday, January 20, 2019 at 2:01:00 PM UTC-8, Adnan Mumtaz wrote: >>> >>> Sorry , I was a bit confused, I forgot with this I will make the RPi an >>> AP where the station will connect to, so in that case I will install plain >>> weewx and then follow your instructions and once I can see data being >>> received I will work on different skins, more interested in Belchertown and >>> also weather34 >>> >>> On Monday, 21 January 2019 00:05:18 UTC+3, Adnan Mumtaz wrote: >>>> >>>> Hi Scott, >>>> >>>> Received the RPi , installed the OS and installed WeeWX to test, >>>> everything went smooth, then started reading the links you shared, >>>> tomorrow >>>> I should be receiving my WS too hopefully it was held by customs :) >>>> >>>> Question, the link you shared with me has prerequisites , which are >>>> straight but there is a link which takes to >>>> https://github.com/matthewwall/weewx-interceptor , so the first step >>>> of prerequisites should be to install weewx interceptor and then follow >>>> the >>>> rest in the link, I understand the RPi will sniff data via WiFi and it >>>> will >>>> have access to WAN using Ethernet connection, can you also share your >>>> website. >>>> >>>> Thanks a lot, >>>> Adnan >>>> >>>> On Wednesday, 16 January 2019 01:48:06 UTC+3, Scott Grayban wrote: >>>>> >>>>> I use this one https://smile.amazon.com/gp/product/B06XWMQ81P/ >>>>> >>>>> SanDisk Extreme 32GB microSDHC UHS-3 Card - SDSQXAF-032G-GN6MA >>>>> >>>>> On Tuesday, January 15, 2019 at 2:23:52 PM UTC-8, Adnan Mumtaz wrote: >>>>>> >>>>>> I am a Debian user , not a very advanced one but i have concepts, I >>>>>> am dowloading the RPi Debian Lite version as I wouldnt need a desktop, >>>>>> what >>>>>> size and brand SD would you recommend >>>>>> >>>>>> On Tuesday, 15 January 2019 22:38:12 UTC+3, Scott Grayban wrote: >>>>>>> >>>>>>> Sure but you shouldn't have any problems unless you don't know >>>>>>> anything about linux. >>>>>>> >>>>>>> On Tuesday, January 15, 2019 at 11:35:11 AM UTC-8, Adnan Mumtaz >>>>>>> wrote: >>>>>>>> >>>>>>>> Thanks a lot, ordered it. Will need your help again if i get stuck >>>>>>>> in something. So kind of you. >>>>>>>> >>>>>>>> Regards, >>>>>>>> Adnan >>>>>>>> >>>>>>>> On Tuesday, 15 January 2019 22:27:19 UTC+3, Scott Grayban wrote: >>>>>>>>> >>>>>>>>> This one >>>>>>>>> https://saudi.souq.com/sa-en/raspberry-pi-3-model-b+-plus-32895409/i/ >>>>>>>>> >>>>>>>>> On Tuesday, January 15, 2019 at 11:09:11 AM UTC-8, Adnan Mumtaz >>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Hi Scott, >>>>>>>>>> >>>>>>>>>> Bundle of thanks for sharing your hardwork, will you suggest >>>>>>>>>> which RPi should I buy, I can find few available in a local e-store >>>>>>>>>> https://saudi.souq.com/sa-en/raspberry-pi/s/?as=1 >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> Adnan >>>>>>>>>> >>>>>>>>>> On Tuesday, 15 January 2019 21:37:41 UTC+3, Scott Grayban wrote: >>>>>>>>>>> >>>>>>>>>>> You also need to buy a Rpi from amazon or the UK Rpi store for >>>>>>>>>>> this to work. https://www.raspberrypi.org/ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Tuesday, January 15, 2019 at 10:14:38 AM UTC-8, Adnan Mumtaz >>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Greetings from Saudi Arabia, >>>>>>>>>>>> >>>>>>>>>>>> I am an expat living and working in Riyadh, Saudi Arabia. I >>>>>>>>>>>> have recently purchased Ambient Weather WS-2902A which I will be >>>>>>>>>>>> receiving >>>>>>>>>>>> next week, I have a domain and web hosting where I want to publish >>>>>>>>>>>> my >>>>>>>>>>>> weather using WeeWX (belchertown template). I am a systems >>>>>>>>>>>> engineer but far >>>>>>>>>>>> from programming since a very long time, I will appreciate if >>>>>>>>>>>> someone can >>>>>>>>>>>> guide me, I did search the forum and found few had issues and >>>>>>>>>>>> those who had >>>>>>>>>>>> success are not publishing details. >>>>>>>>>>>> >>>>>>>>>>>> Awaiting positive response . >>>>>>>>>>>> >>>>>>>>>>>> Thank you, >>>>>>>>>>>> Adnan >>>>>>>>>>>> >>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
