Welcome to minicom 2.7 OPTIONS: I18n Compiled on Apr 22 2017, 09:14:19. Port /dev/ttyUSB0, 13:15:39
Press CTRL-A Z for help on special keys Even after lots or <enter>s nothing happens on TEST Similarly for screen....... On Tuesday, 29 January 2019 13:22:19 UTC+13, Thomas Keffer wrote: > > The "establishing connectivity" instructions don't mention it, but be sure > to hit <enter> a few times before typing TEST. > > On Mon, Jan 28, 2019 at 4:11 PM monmul <[email protected] <javascript:>> > wrote: > >> Tried both screen and minicom.....no TEST echo back....so must be >> hardware....but totally flummoxed as all hardware (apart from Rpi) has been >> replaced.....have another pi on order....but in the meantime I guess I will >> go back to scratch and start all over again....at least it has worked >> before with this set up....maybe something has become corrupted! >> >> >> On Tuesday, 29 January 2019 12:11:06 UTC+13, Thomas Keffer wrote: >>> >>> Try to communicate directly with the Envoy, without going through WeeWX. >>> For how to do this, see the section *Establishing connectivity >>> <http://weewx.com/docs/usersguide.htm#Establishing_connectivity>* in >>> the User's Guide. If you are unable to do that, then this is definitely a >>> hardware problem. >>> >>> -tk >>> >>> On Mon, Jan 28, 2019 at 2:41 PM dunbrokin <[email protected]> wrote: >>> >>>> Thanks, but no I don't ....I use VNC. >>>> >>>> On Tue, Jan 29, 2019 at 11:35 AM <[email protected]> wrote: >>>> >>>>> Just a quick question. Do you have a monitor (like the Pi 7 in touch >>>>> screen) attached that is running off the same power supply as the Pi? I >>>>> had >>>>> a setup like that which used a splitter to power both the monitor and Pi >>>>> from one power pack. My setup kept complaining of undervolting until I >>>>> removed the splitter and plugged the monitor and pi each into their own >>>>> power supply. >>>>> >>>>> phil >>>>> >>>>> On Monday, January 28, 2019 at 3:41:15 PM UTC-5, monmul wrote: >>>>>> >>>>>> I have replaced the power unit, taken it off the power strip an >>>>>> plugged both it and the Vanatage into the mains. I have replaced the >>>>>> powered hub (official RPi one...with another official RPi one) ...and >>>>>> here >>>>>> is what I am getting.......very dispirited! I have another Davis Weather >>>>>> Envoy which I will soon substitute for the one I am currently >>>>>> using.....but >>>>>> nothing seems to make a difference and the Envoy just will not wake up! >>>>>> >>>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog >>>>>> Jan 29 09:14:05 raspberrypi udisksd[766]: Mounted /dev/sda1 at >>>>>> /media/pi/e78ab10a-51d2-40f0-aa6d-5f2d2b0f27b7 on behalf of uid 1000 >>>>>> Jan 29 09:14:05 raspberrypi vncserver-x11[453,root]: SPrintConnMgr: >>>>>> Failed to add printer: server-error-service-unavailable >>>>>> Jan 29 09:14:07 raspberrypi dhcpcd[338]: wlan0: no IPv6 Routers >>>>>> available >>>>>> Jan 29 09:14:10 raspberrypi kernel: [ 22.871754] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:14:12 raspberrypi weewx[506]: vantage: Unable to wake up >>>>>> console >>>>>> Jan 29 09:14:12 raspberrypi weewx[506]: import of driver failed: >>>>>> Unable to wake up Vantage console (<class 'weewx.WakeupError'>) >>>>>> Jan 29 09:14:12 raspberrypi weewx[506]: engine: Unable to load >>>>>> driver: Unable to wake up Vantage console >>>>>> Jan 29 09:14:12 raspberrypi weewx[506]: **** Exiting... >>>>>> Jan 29 09:14:27 raspberrypi kernel: [ 39.511958] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:14:31 raspberrypi kernel: [ 43.671921] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 103.239.8.22 >>>>>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 202.46.185.18 >>>>>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 203.99.128.48 >>>>>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 103.106.66.123 >>>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 103.242.68.69 >>>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 103.106.65.219 >>>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 103.242.70.5 >>>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 122.252.188.99 >>>>>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 130.217.226.51 >>>>>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 103.242.68.68 >>>>>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 203.99.128.34 >>>>>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 202.46.177.18 >>>>>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 2407:f100:0:4::3 >>>>>> Jan 29 09:15:06 raspberrypi ntpd[467]: Soliciting pool server >>>>>> 202.46.178.18 >>>>>> Jan 29 09:17:41 raspberrypi systemd[584]: Time has been changed >>>>>> Jan 29 09:17:41 raspberrypi systemd[1]: Time has been changed >>>>>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily.timer: Adding 9h >>>>>> 28min 39.184756s random time. >>>>>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily-upgrade.timer: >>>>>> Adding 27min 17.961005s random time. >>>>>> Jan 29 09:18:28 raspberrypi kernel: [ 126.872661] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:18:34 raspberrypi kernel: [ 133.112736] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:18:34 raspberrypi CRON[1276]: (root) CMD ( cd / && >>>>>> run-parts --report /etc/cron.hourly) >>>>>> Jan 29 09:22:29 raspberrypi kernel: [ 368.155297] >>>>>> rpi_firmware_get_throttled: 2 callbacks suppressed >>>>>> Jan 29 09:22:29 raspberrypi kernel: [ 368.155304] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:22:33 raspberrypi kernel: [ 372.315315] >>>>>> rpi_firmware_get_throttled: 2 callbacks suppressed >>>>>> Jan 29 09:22:33 raspberrypi kernel: [ 372.315322] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:24:27 raspberrypi kernel: [ 486.716533] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:24:34 raspberrypi kernel: [ 492.956607] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:26:28 raspberrypi kernel: [ 607.357755] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:26:32 raspberrypi kernel: [ 611.517793] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:26:45 raspberrypi ntpd[467]: 203.99.128.34 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:30:13 raspberrypi ntpd[467]: 103.239.8.22 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:30:45 raspberrypi ntpd[467]: 203.99.128.48 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:31:18 raspberrypi ntpd[467]: 122.252.188.99 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:31:23 raspberrypi systemd[1]: Starting Cleanup of Temporary >>>>>> Directories... >>>>>> Jan 29 09:31:23 raspberrypi systemd[1]: Started Cleanup of Temporary >>>>>> Directories. >>>>>> Jan 29 09:32:22 raspberrypi ntpd[467]: 130.217.226.51 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:32:59 raspberrypi kernel: [ 998.401865] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:33:03 raspberrypi kernel: [ 1002.561870] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:33:05 raspberrypi kernel: [ 1004.643095] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:33:12 raspberrypi kernel: [ 1010.882010] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:33:22 raspberrypi kernel: [ 1021.282184] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:33:34 raspberrypi kernel: [ 1033.762240] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:34:42 raspberrypi ntpd[467]: 103.106.66.123 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:35:16 raspberrypi ntpd[467]: 103.106.65.219 local addr >>>>>> 10.1.1.7 -> <null> >>>>>> Jan 29 09:38:17 raspberrypi kernel: [ 1316.645409] >>>>>> rpi_firmware_get_throttled: 12 callbacks suppressed >>>>>> Jan 29 09:38:17 raspberrypi kernel: [ 1316.645416] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:38:26 raspberrypi kernel: [ 1324.965452] >>>>>> rpi_firmware_get_throttled: 12 callbacks suppressed >>>>>> Jan 29 09:38:26 raspberrypi kernel: [ 1324.965457] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:38:28 raspberrypi kernel: [ 1327.045547] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:38:32 raspberrypi kernel: [ 1331.205544] Voltage normalised >>>>>> (0x00000000) >>>>>> Jan 29 09:38:36 raspberrypi kernel: [ 1335.365722] Under-voltage >>>>>> detected! (0x00050005) >>>>>> Jan 29 09:38:55 raspberrypi kernel: [ 1354.085857] Voltage normalised >>>>>> (0x00000000) >>>>>> >>>>>> >>>>>> On Tuesday, 29 January 2019 08:51:01 UTC+13, vince wrote: >>>>>>> >>>>>>> On Monday, January 28, 2019 at 11:34:08 AM UTC-8, monmul wrote: >>>>>>>> >>>>>>>> I do have a spare official power supply, so I will swap out that >>>>>>>> and test. ... I have a Pi3B+ on the way >>>>>>>> >>>>>>> >>>>>>> Reminder, the pi3b+ need 'more' power and runs a little hotter than >>>>>>> the others, so definitely be certain you have a quality power supply. >>>>>>> >>>>>>> I have had great luck with >>>>>>> https://www.amazon.com/CanaKit-Raspberry-Power-Supply-Listed/dp/B07BC6WH7V >>>>>>> >>>>>>> just as one example. Also like the nice on/off switch dongle that came >>>>>>> with it. >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
