No change on anything else besides WS and R-Pi - if they are on the same local network. But you need of course to set a static IP (disable DHCP) on your R-pi so the WS have a known destination IP when uploading data.
Den torsdag 7 november 2019 kl. 10:35:47 UTC+1 skrev miso k: > > thanks, > is it all about weewx on rpi, or do I need to make some changes on > router/somewhere else too? > > > Dňa piatok, 1. novembra 2019 7:47:34 UTC+1 Ingper napísal(-a): >> >> As you may have seen in my thread (linked above) it's possible to get it >> work, quite easy with "Ecowitt" protocol (but not WU) by using Interceptor. >> I think that is the easiest way, even though you don't want to use >> Interceptor driver... >> >> Den fredag 1 november 2019 kl. 06:44:50 UTC+1 skrev miso k: >>> >>> Nobody? >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e00cdb49-f66b-4829-8cf5-584a4f96ada1%40googlegroups.com.
