If you are trying to use the custom server from a Fine Offset device you don't need anything except to assign as static IP to your WeeWx machine. No AP, no DHCPD, just a static IP from your router.
On Sunday, November 17, 2019 at 9:31:50 AM UTC-5, miso k wrote: > > going further: > > cant find /etc/dhcpd.config on my Pi > > > https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver#edit-etcdhcpcdconfand-edit-the-first-4-lines-below-for-yournetwork-router-static-ip > > Dňa nedeľa, 17. novembra 2019 15:18:33 UTC+1 miso k napísal(-a): >> >> Cant install it. >> >> during install I chose Simulator driver. >> >> then continued here: >> >> https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver >> >> after entering the second command >> >>> sudo wee_extension --install weewx-interceptor-master.zip >> >> >> i got this >> >> sudo wee_extension --install weewx-interceptor-master.zip >>> Request to install 'weewx-interceptor-master.zip' >>> Traceback (most recent call last): >>> File "/usr/bin/wee_extension", line 82, in <module> >>> main() >>> File "/usr/bin/wee_extension", line 74, in main >>> ext.install_extension(options.install) >>> File "/usr/share/weewx/weecfg/extension.py", line 125, in >>> install_extension >>> raise InstallError("Extension '%s' not found." % extension_path) >>> weecfg.extension.InstallError: Extension 'weewx-interceptor-master.zip' >>> not found. >> >> >> :( >> >> >> Dňa štvrtok, 7. novembra 2019 11:57:37 UTC+1 Ingper napísal(-a): >>> >>> No change on anything else besides WS and R-Pi - if they are on the same >>> local network. But you need of course to set a static IP (disable DHCP) on >>> your R-pi so the WS have a known destination IP when uploading data. >>> >>> Den torsdag 7 november 2019 kl. 10:35:47 UTC+1 skrev miso k: >>>> >>>> thanks, >>>> is it all about weewx on rpi, or do I need to make some changes on >>>> router/somewhere else too? >>>> >>>> >>>> Dňa piatok, 1. novembra 2019 7:47:34 UTC+1 Ingper napísal(-a): >>>>> >>>>> As you may have seen in my thread (linked above) it's possible to get >>>>> it work, quite easy with "Ecowitt" protocol (but not WU) by using >>>>> Interceptor. I think that is the easiest way, even though you don't want >>>>> to >>>>> use Interceptor driver... >>>>> >>>>> Den fredag 1 november 2019 kl. 06:44:50 UTC+1 skrev miso k: >>>>>> >>>>>> Nobody? >>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/bd60cc4f-fbc1-4bbd-ba62-ee4392954858%40googlegroups.com.
