Look at this thread: USE GW1000 <https://www.wxforum.net/index.php?topic=37471.0>
On Sunday, November 17, 2019 at 11:58:03 AM UTC-5, miso k wrote: > > fantastic! so where should I end? > here? > > https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver#edit-etcdhcpcdconfand-edit-the-first-4-lines-below-for-yournetwork-router-static-ip > > Dňa nedeľa, 17. novembra 2019 16:19:46 UTC+1 G Hammer napísal(-a): >> >> If you are trying to use the custom server from a Fine Offset device you >> don't need anything except to assign as static IP to your WeeWx machine. >> No AP, no DHCPD, just a static IP from your router. >> >> On Sunday, November 17, 2019 at 9:31:50 AM UTC-5, miso k wrote: >>> >>> going further: >>> >>> cant find /etc/dhcpd.config on my Pi >>> >>> >>> https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver#edit-etcdhcpcdconfand-edit-the-first-4-lines-below-for-yournetwork-router-static-ip >>> >>> Dňa nedeľa, 17. novembra 2019 15:18:33 UTC+1 miso k napísal(-a): >>>> >>>> Cant install it. >>>> >>>> during install I chose Simulator driver. >>>> >>>> then continued here: >>>> >>>> https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver >>>> >>>> after entering the second command >>>> >>>>> sudo wee_extension --install weewx-interceptor-master.zip >>>> >>>> >>>> i got this >>>> >>>> sudo wee_extension --install weewx-interceptor-master.zip >>>>> Request to install 'weewx-interceptor-master.zip' >>>>> Traceback (most recent call last): >>>>> File "/usr/bin/wee_extension", line 82, in <module> >>>>> main() >>>>> File "/usr/bin/wee_extension", line 74, in main >>>>> ext.install_extension(options.install) >>>>> File "/usr/share/weewx/weecfg/extension.py", line 125, in >>>>> install_extension >>>>> raise InstallError("Extension '%s' not found." % extension_path) >>>>> weecfg.extension.InstallError: Extension >>>>> 'weewx-interceptor-master.zip' not found. >>>> >>>> >>>> :( >>>> >>>> >>>> Dňa štvrtok, 7. novembra 2019 11:57:37 UTC+1 Ingper napísal(-a): >>>>> >>>>> No change on anything else besides WS and R-Pi - if they are on the >>>>> same local network. But you need of course to set a static IP (disable >>>>> DHCP) on your R-pi so the WS have a known destination IP when uploading >>>>> data. >>>>> >>>>> Den torsdag 7 november 2019 kl. 10:35:47 UTC+1 skrev miso k: >>>>>> >>>>>> thanks, >>>>>> is it all about weewx on rpi, or do I need to make some changes on >>>>>> router/somewhere else too? >>>>>> >>>>>> >>>>>> Dňa piatok, 1. novembra 2019 7:47:34 UTC+1 Ingper napísal(-a): >>>>>>> >>>>>>> As you may have seen in my thread (linked above) it's possible to >>>>>>> get it work, quite easy with "Ecowitt" protocol (but not WU) by using >>>>>>> Interceptor. I think that is the easiest way, even though you don't >>>>>>> want to >>>>>>> use Interceptor driver... >>>>>>> >>>>>>> Den fredag 1 november 2019 kl. 06:44:50 UTC+1 skrev miso k: >>>>>>>> >>>>>>>> Nobody? >>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ed3f6b7e-c59d-41a9-ba2b-3748e603c40f%40googlegroups.com.
