My experience with getting the data using Interceptor is that it's a pain. I tried the DNS spoofing, setting up an AP on the weewx machine and sniffing the data (worked best), iptables in my router. None were really good as there were too many moving parts. I then used the SDR method and it worked fine once the receiver was in just the right place. Then, as happens with radio, a sensor was lost and never regained. I found the GW1000 method and have not looked back. Dead simple. MWall has written a driver for it.
If you really just want to use the Interceptor network method, I'd suggest simplifying your overall design then introduce additional items one at a time. Me? I'm firmly in the simple camp with the GW1000. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0844c61c-ddfd-471b-ace3-96f2c642de96%40googlegroups.com.
