Glenn, Indeed something got cut off on the beginning. Not sure how that happened but it was a little background on me and my minimal programing experience with an Ames breadboard computer back in '79 when I was in college and it was for Electronics for Scientists class. I was not the best of programmers, but I love tinkering with this stuff. and the addresses you see are from my PYTHONPATH= blah blah --Sensors read as well as from OWFS Localhost:2121, I can surely send you the data on what each sensor returns. I set the thing up in front of a fan to watch the wind speed! LOL. 2.5 to 3 mph....I still have not calibrated the tiping-bucket rain guage (the original DS round one). I can set up a window with VNC for you if you can help, or an SSH. I don't know how to privately message you other than thru e-mail. I will post an excel file with all the addresses of the chips I have and what I have them for. my first message on this thread has the layout of the PCB reed switches in that stick figure with the addresses listed below for the windvane.
Bret Craytor On Monday, March 23, 2020 at 11:55:52 AM UTC-5, Bret Craytor wrote: > > Hey! > > Which sensor type should I use in my OWFS WEEWX conf file? I have the > addresses of the DS2401's on the PCB layout: > > > D E F > C G > B A H > II > II -mount side (viewed from top of PCB > > > A: 01.B5374A040000 > B: 01.B2374A040000 > C: 01.BA374A040000 > D: 01.B7374A040000 > E: 01.C6374A040000 > F: 01.C3374A040000 > G: 01.BD374A040000 > H: 01.AE374A040000 > > As you can see, the first two digits after the dot are the only values > that change. Surely someone out there has already made a sensor type file > for this, and can help with my weewx.conf file setup. > > I had some earlier posts and recieved great help, but have had to keep > putting the project down to do other tasks, but with the COVID-19 > instructions for staying home, here I am! Thanks for your help WEEWX > community! > > Bret Craytor > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f679eb7b-bf30-44c5-b3b2-1b3db6f8d6b6%40googlegroups.com.
