Did you enter a local barometer reading to the 2100? I don't have my manual handy, but seem to remember that in order for the 2100 to output the barometer reading you first have to calibrate it by entering a local value once. I don't upload to weather sites with my systems but both of my Ultimeter 2100s output a barometer reading for WeeWx.
On Sunday, April 19, 2020 at 5:51:36 AM UTC-7, Burt Wizeman wrote: > > Thanks for all the info in this group! It has helped me with my weekend > spent trying to debug some of the issues I ran into. One of those issues > was that no barometer was showing up at CWOP. I have now learned that is > due to the calc needing the humidity which I lack. I notice that Weather > Display software in Windows provides CWOP with barometer so I assume that > is pulling humidity from some source. Is there a way to add a pad to the > Ultimeter driver so it could be configured to grab humidity from another > source so that the altimeter calc could be accomplished? Any ideas? > Trying to save the 110.00 for the meter. > > Burt > K4SRQ > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5407c57e-e98f-4945-bf26-0aca44057135%40googlegroups.com.
