Hi guys, I have identified that the acurite 5-in-1 and the SDR are working but the information coming form the sensor is km/h. This is what it looks like when i run rtl_433 from the console: https://www.dropbox.com/s/trnj0sype60w6m1/picture.png?dl=0
The problem is, weewx is broadcasting the 'km/h' reading to windguru as if it were a 'knots' reading https://www.windguru.cz/station/2146. I have proven this by disabling the rtl_433 command in weewx.conf and then running directly from the console. I see the wind_speed is 10km/h and then i re-enable rtl_433 in weewx.conf and reboot... and 5 minutes later with the same wind conditions it is reporting 10 knots to windGuru. I have tried changing the below settings in weewx.conf to 'knots' but it did not fix the problem. Any ideas? group_speed = knot # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = knot2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' Thanks, Sean. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CALeSoZnbWtvBaac7yPNRTA26XfcfGoA5SomBtKHaN%2BDbLZTCJQ%40mail.gmail.com.
