You're MQTT is sending rain information in CM. Do you want it in CM or MM?
Looking at the code, you'll want rainWithRainRate to show the dayRain
observation.
If you want this in MM, you need to update your weewx.conf [[MQTT]] section
to send data in MM.
[[MQTT]]
[[[inputs]]]
[[[[dayRain]]]]
name = dayRain_mm
units = mm
MQTT: {"dateTime": "1594742272.0", "outTemp_C": "21.333333333333336",
"outHumidity": "64.9", "dewpoint_C": "14.444444444444445", "heatindex_C":
"21.166666666666664", "windchill_C": "21.333333333333336", "windSpeed_kph":
"1.7059046400000002", "windDir": "360.0", "windGust_kph":
"3.4118092800000004", "windGustDir": "6.0", "barometer_mbar":
"1015.7471282370167", "pressure_mbar": "998.4088208638761", "rain_cm":
"0.0", "rainRate_cm_per_hour": "0.0", "inTemp_C": "25.944444444444443",
"inHumidity": "42.6", "inDewpoint_C": "12.277777777777779", "usUnits":
"16.0", "altimeter_mbar": "1016.4348448211537", "appTemp_C":
"22.423477298218454", "beaufort_count": "0.0", "cloudbase_meter":
"988.6539444933627", "humidex_C": "24.96873770987386", "maxSolarRad_Wpm2":
"531.7266550230675", "hourRain_cm": "0.0", "rain24_cm": "0.0600000324",
"dayRain_cm":
"0.0600000324"}
On Tuesday, July 14, 2020 at 11:56:45 AM UTC-4, Didier Decoodt wrote:
>
> meteo-auffargis.decoodt.eu
>
> Le mar. 14 juil. 2020 à 17:56, Pat <p...@obrienphoto.net <javascript:>> a
> écrit :
>
>> What is the link to your site? I'll take a look at it through your debug
>>
>> On Tuesday, July 14, 2020 at 11:55:18 AM UTC-4, Didier Decoodt wrote:
>>>
>>> How do you do that?
>>>
>>>
>>> Le mar. 14 juil. 2020 à 17:50, Pat <p...@obrienphoto.net> a écrit :
>>>
>>>> What does your mqtt say for rain or day rain?
>>>>
>>>> On Tuesday, July 14, 2020 at 11:40:57 AM UTC-4, Didier Decoodt wrote:
>>>>>
>>>>> I verify rainTotal in graphs.conf, it's OK 0,6 mm
>>>>>
>>>>> Le mar. 14 juil. 2020 à 17:33, Didier Decoodt <didier...@gmail.com> a
>>>>> écrit :
>>>>>
>>>>>> I try rainTotal and rainRate ==> Invalid observation
>>>>>> I try rainWithRainRate ==> always 0,1mm (instead of 0,6)
>>>>>>
>>>>>>
>>>>>> Le mar. 14 juil. 2020 à 17:23, Pat <p...@obrienphoto.net> a écrit :
>>>>>>
>>>>>>> Or if you want them separated, try
>>>>>>>
>>>>>>> station_observations = "barometer", "dewpoint", "outHumidity",
>>>>>>> "rainTotal", "rainRate"
>>>>>>>
>>>>>>>
>>>>>>> "rain" will show you just the last rain value from mqtt, if you want
>>>>>>> the total you'll need to try rainTotal or rainWithRainRate
>>>>>>>
>>>>>>> On Tuesday, July 14, 2020 at 11:21:40 AM UTC-4, Pat wrote:
>>>>>>>>
>>>>>>>> I think you'll want this
>>>>>>>>
>>>>>>>> station_observations = "barometer", "dewpoint", "outHumidity",
>>>>>>>> "rainWithRainRate"
>>>>>>>>
>>>>>>>> Save and restart weewx
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tuesday, July 14, 2020 at 11:18:11 AM UTC-4, Didier Decoodt
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> Ah... this is for today (missunderstanding)
>>>>>>>>> But today I have 3*0.2=0.6 mm
>>>>>>>>>
>>>>>>>>> # Station Observations. Special observation
>>>>>>>>> rainWithRainRate combines Daily Rain with Rain Rate in 1 line
>>>>>>>>> station_observations = barometer, dewpoint,
>>>>>>>>> outHumidity, rain, rainRate
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Le mar. 14 juil. 2020 à 17:12, Pat <p...@obrienphoto.net> a
>>>>>>>>> écrit :
>>>>>>>>>
>>>>>>>>>> Why is this a problem?
>>>>>>>>>>
>>>>>>>>>> You've had 0,1mm of rain today right?
>>>>>>>>>>
>>>>>>>>>> This shows the rain you've had for today.
>>>>>>>>>>
>>>>>>>>>> What do you have for your station_observations setting?
>>>>>>>>>>
>>>>>>>>>> On Tuesday, July 14, 2020 at 10:58:30 AM UTC-4, Didier Decoodt
>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> OK
>>>>>>>>>>> But now it is 5 PM, and the last rainfall was at 11 AM this
>>>>>>>>>>> morning, and I see 0,1 mm.
>>>>>>>>>>> This is a problem...
>>>>>>>>>>>
>>>>>>>>>>> Le mar. 14 juil. 2020 à 16:49, Pat <p...@obrienphoto.net> a
>>>>>>>>>>> écrit :
>>>>>>>>>>>
>>>>>>>>>>>> When the page is first loaded, it loads the information from
>>>>>>>>>>>> the database. After MQTT connects, it then updates from any
>>>>>>>>>>>> information in
>>>>>>>>>>>> MQTT.
>>>>>>>>>>>>
>>>>>>>>>>>> Sometimes MQTT is more updated than the databased depending on
>>>>>>>>>>>> the time of your archives. timing of loop, etc.
>>>>>>>>>>>>
>>>>>>>>>>>> On Tuesday, July 14, 2020 at 6:19:38 AM UTC-4,
>>>>>>>>>>>> didier....@gmail.com wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>
>>>>>>>>>>>>> I don't understand why I have a rain = 0,1 mm while it hasn't
>>>>>>>>>>>>> been raining for 1/4 h
>>>>>>>>>>>>> (RainRate seems to be correct during this period)
>>>>>>>>>>>>> When I press F5 to refresh the screen, it appears very shortly
>>>>>>>>>>>>> 0 mm, then 0,1 mm
>>>>>>>>>>>>> Do you have an explaination?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hereafter the "ip"/v1/current_conditions
>>>>>>>>>>>>> {"data":{"did":"001D0A711DF5","ts":1594720938,"conditions":[{"lsid":319839,"data_structure_type":1,"txid":1,"temp":
>>>>>>>>>>>>>
>>>>>>>>>>>>> 59.6,"hum":83.3,"dew_point": 54.5,"wet_bulb": 56.3,"heat_index":
>>>>>>>>>>>>> 59.6,"wind_chill": 59.6,"thw_index":
>>>>>>>>>>>>> 59.6,"thsw_index":null,"wind_speed_last":0.93,"wind_dir_last":300,"wind_speed_avg_last_1_min":0.93,"wind_dir_scalar_avg_last_1_min":260,"wind_speed_avg_last_2_min":0.62,"wind_dir_scalar_avg_last_2_min":266,"wind_speed_hi_last_2_min":3.43,"wind_dir_at_hi_speed_last_2_min":300,"wind_speed_avg_last_10_min":0.93,"wind_dir_scalar_avg_last_10_min":242,"wind_speed_hi_last_10_min":4.25,"wind_dir_at_hi_speed_last_10_min":15,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":3,"rainfall_last_24_hr":3,"rain_storm":3,"rain_storm_start_at":1594717981,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":3,"rainfall_monthly":8,"rainfall_year":60,"rain_storm_last":5,"rain_storm_last_start_at":1593604621,"rain_storm_last_end_at":1593702061},{"lsid":319838,"data_structure_type":4,"temp_in":
>>>>>>>>>>>>>
>>>>>>>>>>>>> 77.8,"hum_in":40.6,"dew_point_in": 52.0,"heat_index_in":
>>>>>>>>>>>>> 76.9},{"lsid":319837,"data_structure_type":3,"bar_sea_level":30.074,"bar_trend":-0.002,"bar_absolute":29.561}]},"error":null}
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>> it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com
>>>>>>>>>>>>
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to weewx...@googlegroups.com.
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com
>>>>>>>>>>
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to weewx...@googlegroups.com.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com
>>>>>>>
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx...@googlegroups.com <javascript:>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/9ac560ac-b9d9-4eed-a147-69662ee125f5o%40googlegroups.com.
