Many thank's , it's right now
Just for my information, in the MQTT request you have also hourRain_cm and
rain24_cm, is it necessary to change MQTT units (as dayRain)?
Is changing cm by mm has an impact on mySQL database?
Last question: how do you do this MQTT request?
MQTT: {"dateTime": "1594742272.0", "outTemp_C": "21.333333333333336",
"outHumidity": "64.9", "dewpoint_C": "14.444444444444445", "heatindex_C":
"21.166666666666664", "windchill_C": "21.333333333333336", "windSpeed_kph":
"1.7059046400000002", "windDir": "360.0", "windGust_kph":
"3.4118092800000004", "windGustDir": "6.0", "barometer_mbar":
"1015.7471282370167", "pressure_mbar": "998.4088208638761", "rain_cm":
"0.0", "rainRate_cm_per_hour": "0.0", "inTemp_C": "25.944444444444443",
"inHumidity": "42.6", "inDewpoint_C": "12.277777777777779", "usUnits":
"16.0", "altimeter_mbar": "1016.4348448211537", "appTemp_C":
"22.423477298218454", "beaufort_count": "0.0", "cloudbase_meter":
"988.6539444933627", "humidex_C": "24.96873770987386", "maxSolarRad_Wpm2":
"531.7266550230675", "hourRain_cm": "0.0", "rain24_cm":
"0.0600000324", "dayRain_cm":
"0.0600000324"}
Le mar. 14 juil. 2020 à 18:26, Pat <p...@obrienphoto.net> a écrit :
> If you really want them split, try this?
>
> station_observations = "barometer", "dewpoint", "outHumidity", "dayRain",
> "rainRate"
>
> Anything in the MQTT packet should be viewable. rainWithRainRate is a
> special one that combines 2 observations into 1 line.
>
>
>
> On Tuesday, July 14, 2020 at 12:23:16 PM UTC-4, Pat wrote:
>>
>> Remove rainTotal, that was my mistake. I confused the chart for the
>> station_observations.
>>
>> Right now rainWithRainRate is the only one that will show you the rain
>> total for the day using the dayRain observation.
>>
>>
>>
>> On Tuesday, July 14, 2020 at 12:19:34 PM UTC-4, Didier Decoodt wrote:
>>>
>>> I do that and I display: station_observations = "barometer", "dewpoint",
>>> "outHumidity", "rainWithRainRate", "rainTotal", "rain", "rainRate"
>>> I don't understand rainTotal (invalid observation) and rain (0,1 mm)
>>>
>>> Le mar. 14 juil. 2020 à 18:10, Pat <p...@obrienphoto.net> a écrit :
>>>
>>>> You'll also need to update rain, rainRate too for mm
>>>>
>>>> [[[inputs]]]
>>>> [[[[dayRain]]]]
>>>> name = dayRain_mm
>>>> units = mm
>>>> [[[[rainRate]]]]
>>>> name = rainRate_mm_per_hour
>>>> units = mm_per_hour
>>>> [[[[rain]]]]
>>>> name = rain_mm
>>>> units = mm
>>>>
>>>>
>>>>
>>>> On Tuesday, July 14, 2020 at 12:01:45 PM UTC-4, Pat wrote:
>>>>>
>>>>> You're MQTT is sending rain information in CM. Do you want it in CM or
>>>>> MM?
>>>>>
>>>>> Looking at the code, you'll want rainWithRainRate to show the dayRain
>>>>> observation.
>>>>>
>>>>> If you want this in MM, you need to update your weewx.conf [[MQTT]]
>>>>> section to send data in MM.
>>>>>
>>>>> [[MQTT]]
>>>>> [[[inputs]]]
>>>>> [[[[dayRain]]]]
>>>>> name = dayRain_mm
>>>>> units = mm
>>>>>
>>>>>
>>>>> MQTT: {"dateTime": "1594742272.0", "outTemp_C": "21.333333333333336",
>>>>> "outHumidity": "64.9", "dewpoint_C": "14.444444444444445", "heatindex_C":
>>>>> "21.166666666666664", "windchill_C": "21.333333333333336",
>>>>> "windSpeed_kph":
>>>>> "1.7059046400000002", "windDir": "360.0", "windGust_kph":
>>>>> "3.4118092800000004", "windGustDir": "6.0", "barometer_mbar":
>>>>> "1015.7471282370167", "pressure_mbar": "998.4088208638761", "rain_cm":
>>>>> "0.0", "rainRate_cm_per_hour": "0.0", "inTemp_C": "25.944444444444443",
>>>>> "inHumidity": "42.6", "inDewpoint_C": "12.277777777777779", "usUnits":
>>>>> "16.0", "altimeter_mbar": "1016.4348448211537", "appTemp_C":
>>>>> "22.423477298218454", "beaufort_count": "0.0", "cloudbase_meter":
>>>>> "988.6539444933627", "humidex_C": "24.96873770987386", "maxSolarRad_Wpm2":
>>>>> "531.7266550230675", "hourRain_cm": "0.0", "rain24_cm": "0.0600000324",
>>>>> "dayRain_cm":
>>>>> "0.0600000324"}
>>>>>
>>>>>
>>>>> On Tuesday, July 14, 2020 at 11:56:45 AM UTC-4, Didier Decoodt wrote:
>>>>>>
>>>>>> meteo-auffargis.decoodt.eu
>>>>>>
>>>>>> Le mar. 14 juil. 2020 à 17:56, Pat <p...@obrienphoto.net> a écrit :
>>>>>>
>>>>>>> What is the link to your site? I'll take a look at it through your
>>>>>>> debug
>>>>>>>
>>>>>>> On Tuesday, July 14, 2020 at 11:55:18 AM UTC-4, Didier Decoodt wrote:
>>>>>>>>
>>>>>>>> How do you do that?
>>>>>>>>
>>>>>>>>
>>>>>>>> Le mar. 14 juil. 2020 à 17:50, Pat <p...@obrienphoto.net> a écrit :
>>>>>>>>
>>>>>>>>> What does your mqtt say for rain or day rain?
>>>>>>>>>
>>>>>>>>> On Tuesday, July 14, 2020 at 11:40:57 AM UTC-4, Didier Decoodt
>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> I verify rainTotal in graphs.conf, it's OK 0,6 mm
>>>>>>>>>>
>>>>>>>>>> Le mar. 14 juil. 2020 à 17:33, Didier Decoodt <
>>>>>>>>>> didier...@gmail.com> a écrit :
>>>>>>>>>>
>>>>>>>>>>> I try rainTotal and rainRate ==> Invalid observation
>>>>>>>>>>> I try rainWithRainRate ==> always 0,1mm (instead of 0,6)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Le mar. 14 juil. 2020 à 17:23, Pat <p...@obrienphoto.net> a
>>>>>>>>>>> écrit :
>>>>>>>>>>>
>>>>>>>>>>>> Or if you want them separated, try
>>>>>>>>>>>>
>>>>>>>>>>>> station_observations = "barometer", "dewpoint",
>>>>>>>>>>>> "outHumidity", "rainTotal", "rainRate"
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> "rain" will show you just the last rain value from mqtt, if you
>>>>>>>>>>>> want the total you'll need to try rainTotal or rainWithRainRate
>>>>>>>>>>>>
>>>>>>>>>>>> On Tuesday, July 14, 2020 at 11:21:40 AM UTC-4, Pat wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> I think you'll want this
>>>>>>>>>>>>>
>>>>>>>>>>>>> station_observations = "barometer", "dewpoint",
>>>>>>>>>>>>> "outHumidity", "rainWithRainRate"
>>>>>>>>>>>>>
>>>>>>>>>>>>> Save and restart weewx
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tuesday, July 14, 2020 at 11:18:11 AM UTC-4, Didier Decoodt
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ah... this is for today (missunderstanding)
>>>>>>>>>>>>>> But today I have 3*0.2=0.6 mm
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> # Station Observations. Special observation
>>>>>>>>>>>>>> rainWithRainRate combines Daily Rain with Rain Rate in 1 line
>>>>>>>>>>>>>> station_observations = barometer, dewpoint,
>>>>>>>>>>>>>> outHumidity, rain, rainRate
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Le mar. 14 juil. 2020 à 17:12, Pat <p...@obrienphoto.net> a
>>>>>>>>>>>>>> écrit :
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Why is this a problem?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You've had 0,1mm of rain today right?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This shows the rain you've had for today.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> What do you have for your station_observations setting?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Tuesday, July 14, 2020 at 10:58:30 AM UTC-4, Didier
>>>>>>>>>>>>>>> Decoodt wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> OK
>>>>>>>>>>>>>>>> But now it is 5 PM, and the last rainfall was at 11 AM this
>>>>>>>>>>>>>>>> morning, and I see 0,1 mm.
>>>>>>>>>>>>>>>> This is a problem...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Le mar. 14 juil. 2020 à 16:49, Pat <p...@obrienphoto.net>
>>>>>>>>>>>>>>>> a écrit :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> When the page is first loaded, it loads the information
>>>>>>>>>>>>>>>>> from the database. After MQTT connects, it then updates from
>>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>>> information in MQTT.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Sometimes MQTT is more updated than the databased
>>>>>>>>>>>>>>>>> depending on the time of your archives. timing of loop, etc.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Tuesday, July 14, 2020 at 6:19:38 AM UTC-4,
>>>>>>>>>>>>>>>>> didier....@gmail.com wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I don't understand why I have a rain = 0,1 mm while it
>>>>>>>>>>>>>>>>>> hasn't been raining for 1/4 h
>>>>>>>>>>>>>>>>>> (RainRate seems to be correct during this period)
>>>>>>>>>>>>>>>>>> When I press F5 to refresh the screen, it appears very
>>>>>>>>>>>>>>>>>> shortly 0 mm, then 0,1 mm
>>>>>>>>>>>>>>>>>> Do you have an explaination?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hereafter the "ip"/v1/current_conditions
>>>>>>>>>>>>>>>>>> {"data":{"did":"001D0A711DF5","ts":1594720938,"conditions":[{"lsid":319839,"data_structure_type":1,"txid":1,"temp":
>>>>>>>>>>>>>>>>>> 59.6,"hum":83.3,"dew_point": 54.5,"wet_bulb":
>>>>>>>>>>>>>>>>>> 56.3,"heat_index":
>>>>>>>>>>>>>>>>>> 59.6,"wind_chill": 59.6,"thw_index":
>>>>>>>>>>>>>>>>>> 59.6,"thsw_index":null,"wind_speed_last":0.93,"wind_dir_last":300,"wind_speed_avg_last_1_min":0.93,"wind_dir_scalar_avg_last_1_min":260,"wind_speed_avg_last_2_min":0.62,"wind_dir_scalar_avg_last_2_min":266,"wind_speed_hi_last_2_min":3.43,"wind_dir_at_hi_speed_last_2_min":300,"wind_speed_avg_last_10_min":0.93,"wind_dir_scalar_avg_last_10_min":242,"wind_speed_hi_last_10_min":4.25,"wind_dir_at_hi_speed_last_10_min":15,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":3,"rainfall_last_24_hr":3,"rain_storm":3,"rain_storm_start_at":1594717981,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":3,"rainfall_monthly":8,"rainfall_year":60,"rain_storm_last":5,"rain_storm_last_start_at":1593604621,"rain_storm_last_end_at":1593702061},{"lsid":319838,"data_structure_type":4,"temp_in":
>>>>>>>>>>>>>>>>>> 77.8,"hum_in":40.6,"dew_point_in": 52.0,"heat_index_in":
>>>>>>>>>>>>>>>>>> 76.9},{"lsid":319837,"data_structure_type":3,"bar_sea_level":30.074,"bar_trend":-0.002,"bar_absolute":29.561}]},"error":null}
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> You received this message because you are subscribed to
>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group.
>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails
>>>>>>>>>>>>>>>>> from it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com
>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails
>>>>>>>>>>>>>>> from it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com
>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>> it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to weewx...@googlegroups.com.
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to weewx...@googlegroups.com.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/ad7b0cf0-f128-4434-ab19-4576ae30c133o%40googlegroups.com
>>>> <https://groups.google.com/d/msgid/weewx-user/ad7b0cf0-f128-4434-ab19-4576ae30c133o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/65968db5-aec3-4db1-ace4-b94f239e733co%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/65968db5-aec3-4db1-ace4-b94f239e733co%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAAvt3%3DSVcM8sX0W90dQUxCVWjErZfpckOrv0MStOnBFOtd0wZg%40mail.gmail.com.
