You'll also need to update rain, rainRate too for mm
[[[inputs]]]
[[[[dayRain]]]]
name = dayRain_mm
units = mm
[[[[rainRate]]]]
name = rainRate_mm_per_hour
units = mm_per_hour
[[[[rain]]]]
name = rain_mm
units = mm
On Tuesday, July 14, 2020 at 12:01:45 PM UTC-4, Pat wrote:
>
> You're MQTT is sending rain information in CM. Do you want it in CM or MM?
>
> Looking at the code, you'll want rainWithRainRate to show the dayRain
> observation.
>
> If you want this in MM, you need to update your weewx.conf [[MQTT]]
> section to send data in MM.
>
> [[MQTT]]
> [[[inputs]]]
> [[[[dayRain]]]]
> name = dayRain_mm
> units = mm
>
>
> MQTT: {"dateTime": "1594742272.0", "outTemp_C": "21.333333333333336",
> "outHumidity": "64.9", "dewpoint_C": "14.444444444444445", "heatindex_C":
> "21.166666666666664", "windchill_C": "21.333333333333336", "windSpeed_kph":
> "1.7059046400000002", "windDir": "360.0", "windGust_kph":
> "3.4118092800000004", "windGustDir": "6.0", "barometer_mbar":
> "1015.7471282370167", "pressure_mbar": "998.4088208638761", "rain_cm":
> "0.0", "rainRate_cm_per_hour": "0.0", "inTemp_C": "25.944444444444443",
> "inHumidity": "42.6", "inDewpoint_C": "12.277777777777779", "usUnits":
> "16.0", "altimeter_mbar": "1016.4348448211537", "appTemp_C":
> "22.423477298218454", "beaufort_count": "0.0", "cloudbase_meter":
> "988.6539444933627", "humidex_C": "24.96873770987386", "maxSolarRad_Wpm2":
> "531.7266550230675", "hourRain_cm": "0.0", "rain24_cm": "0.0600000324",
> "dayRain_cm":
> "0.0600000324"}
>
>
> On Tuesday, July 14, 2020 at 11:56:45 AM UTC-4, Didier Decoodt wrote:
>>
>> meteo-auffargis.decoodt.eu
>>
>> Le mar. 14 juil. 2020 à 17:56, Pat <[email protected]> a écrit :
>>
>>> What is the link to your site? I'll take a look at it through your debug
>>>
>>> On Tuesday, July 14, 2020 at 11:55:18 AM UTC-4, Didier Decoodt wrote:
>>>>
>>>> How do you do that?
>>>>
>>>>
>>>> Le mar. 14 juil. 2020 à 17:50, Pat <[email protected]> a écrit :
>>>>
>>>>> What does your mqtt say for rain or day rain?
>>>>>
>>>>> On Tuesday, July 14, 2020 at 11:40:57 AM UTC-4, Didier Decoodt wrote:
>>>>>>
>>>>>> I verify rainTotal in graphs.conf, it's OK 0,6 mm
>>>>>>
>>>>>> Le mar. 14 juil. 2020 à 17:33, Didier Decoodt <[email protected]>
>>>>>> a écrit :
>>>>>>
>>>>>>> I try rainTotal and rainRate ==> Invalid observation
>>>>>>> I try rainWithRainRate ==> always 0,1mm (instead of 0,6)
>>>>>>>
>>>>>>>
>>>>>>> Le mar. 14 juil. 2020 à 17:23, Pat <[email protected]> a écrit :
>>>>>>>
>>>>>>>> Or if you want them separated, try
>>>>>>>>
>>>>>>>> station_observations = "barometer", "dewpoint", "outHumidity",
>>>>>>>> "rainTotal", "rainRate"
>>>>>>>>
>>>>>>>>
>>>>>>>> "rain" will show you just the last rain value from mqtt, if you
>>>>>>>> want the total you'll need to try rainTotal or rainWithRainRate
>>>>>>>>
>>>>>>>> On Tuesday, July 14, 2020 at 11:21:40 AM UTC-4, Pat wrote:
>>>>>>>>>
>>>>>>>>> I think you'll want this
>>>>>>>>>
>>>>>>>>> station_observations = "barometer", "dewpoint", "outHumidity",
>>>>>>>>> "rainWithRainRate"
>>>>>>>>>
>>>>>>>>> Save and restart weewx
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tuesday, July 14, 2020 at 11:18:11 AM UTC-4, Didier Decoodt
>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Ah... this is for today (missunderstanding)
>>>>>>>>>> But today I have 3*0.2=0.6 mm
>>>>>>>>>>
>>>>>>>>>> # Station Observations. Special observation
>>>>>>>>>> rainWithRainRate combines Daily Rain with Rain Rate in 1 line
>>>>>>>>>> station_observations = barometer, dewpoint,
>>>>>>>>>> outHumidity, rain, rainRate
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Le mar. 14 juil. 2020 à 17:12, Pat <[email protected]> a
>>>>>>>>>> écrit :
>>>>>>>>>>
>>>>>>>>>>> Why is this a problem?
>>>>>>>>>>>
>>>>>>>>>>> You've had 0,1mm of rain today right?
>>>>>>>>>>>
>>>>>>>>>>> This shows the rain you've had for today.
>>>>>>>>>>>
>>>>>>>>>>> What do you have for your station_observations setting?
>>>>>>>>>>>
>>>>>>>>>>> On Tuesday, July 14, 2020 at 10:58:30 AM UTC-4, Didier Decoodt
>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> OK
>>>>>>>>>>>> But now it is 5 PM, and the last rainfall was at 11 AM this
>>>>>>>>>>>> morning, and I see 0,1 mm.
>>>>>>>>>>>> This is a problem...
>>>>>>>>>>>>
>>>>>>>>>>>> Le mar. 14 juil. 2020 à 16:49, Pat <[email protected]> a
>>>>>>>>>>>> écrit :
>>>>>>>>>>>>
>>>>>>>>>>>>> When the page is first loaded, it loads the information from
>>>>>>>>>>>>> the database. After MQTT connects, it then updates from any
>>>>>>>>>>>>> information in
>>>>>>>>>>>>> MQTT.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sometimes MQTT is more updated than the databased depending on
>>>>>>>>>>>>> the time of your archives. timing of loop, etc.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tuesday, July 14, 2020 at 6:19:38 AM UTC-4,
>>>>>>>>>>>>> [email protected] wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I don't understand why I have a rain = 0,1 mm while it hasn't
>>>>>>>>>>>>>> been raining for 1/4 h
>>>>>>>>>>>>>> (RainRate seems to be correct during this period)
>>>>>>>>>>>>>> When I press F5 to refresh the screen, it appears very
>>>>>>>>>>>>>> shortly 0 mm, then 0,1 mm
>>>>>>>>>>>>>> Do you have an explaination?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hereafter the "ip"/v1/current_conditions
>>>>>>>>>>>>>> {"data":{"did":"001D0A711DF5","ts":1594720938,"conditions":[{"lsid":319839,"data_structure_type":1,"txid":1,"temp":
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 59.6,"hum":83.3,"dew_point": 54.5,"wet_bulb": 56.3,"heat_index":
>>>>>>>>>>>>>> 59.6,"wind_chill": 59.6,"thw_index":
>>>>>>>>>>>>>> 59.6,"thsw_index":null,"wind_speed_last":0.93,"wind_dir_last":300,"wind_speed_avg_last_1_min":0.93,"wind_dir_scalar_avg_last_1_min":260,"wind_speed_avg_last_2_min":0.62,"wind_dir_scalar_avg_last_2_min":266,"wind_speed_hi_last_2_min":3.43,"wind_dir_at_hi_speed_last_2_min":300,"wind_speed_avg_last_10_min":0.93,"wind_dir_scalar_avg_last_10_min":242,"wind_speed_hi_last_10_min":4.25,"wind_dir_at_hi_speed_last_10_min":15,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":3,"rainfall_last_24_hr":3,"rain_storm":3,"rain_storm_start_at":1594717981,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":3,"rainfall_monthly":8,"rainfall_year":60,"rain_storm_last":5,"rain_storm_last_start_at":1593604621,"rain_storm_last_end_at":1593702061},{"lsid":319838,"data_structure_type":4,"temp_in":
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 77.8,"hum_in":40.6,"dew_point_in": 52.0,"heat_index_in":
>>>>>>>>>>>>>> 76.9},{"lsid":319837,"data_structure_type":3,"bar_sea_level":30.074,"bar_trend":-0.002,"bar_absolute":29.561}]},"error":null}
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com
>>>>>>>>>>>>>
>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>> .
>>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com
>>>>>>>>>>>
>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to [email protected].
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com
>>>>>>>>
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/ad7b0cf0-f128-4434-ab19-4576ae30c133o%40googlegroups.com.
