I lost my manual aeons ago, have downloaded. It's on it's 10th (ish) set of batteries now!
I tried to press down arrow for 4 seconds, but has no effect (backlight goes off, about it). I tried to remove batteries for about 30 minutes yesterday (so I could give whole thing a good clean). And they died at some point in middle of night anyhow. Manual also says it will attempt to reconnect every hour, and I've so far left it for almost a whole day and still no connection. Any other ideas? Many thanks. On Fri, 21 Aug 2020, 05:07 Andrew Milner, <[email protected]> wrote: > read the manual - there is a button to press (i forget which) to regain > communications. Just looked - press and hold the down key for 4 seconds > until the console beeps. > > Register transmitter If no outdoor weather data is displayed or the signal > to the sensors is lost during setting up, mounting, changing of batteries > to the sensor or plugging or unplugging cables, simply press and hold the > DOWN/- key for 4 seconds and a short beep will sound to synchronize the > base station to sensors. Without being synchronized, weather data will not > be received. NOTE: Wait two minutes before re-insert the batteries of > transmitter for proper reset. Note: The best condition for reception is at > night, between midnight and 6:00am – when there is less atmospheric > interference. > > > > On Thursday, 20 August 2020 21:10:43 UTC+3, James Muirhead wrote: >> >> My WH1080 sender / receiver appears to have died. >> >> The battery low indicator had been on for some time and died about 0130 >> this morning. >> >> I changed out the batteries in the sender today and it does not want to >> communicate with the receiver now. LED in the sender comes on and receiver >> appears normal. >> >> I've reset receiver and sender in both orders and left for an hour, etc, >> etc. WeeWX WebUI shows no signal (but I don't know how this is generated). >> >> The communication icon on receiver comes up sporadically for a minute at >> start and for quarter of a second once in a while. >> >> I'm gonna take apart the sender tomorrow and give everything a good >> clean, see if it helps. >> >> Has anyone got a suggestion, other than "buy a new weather station"? >> >> Thanks. >> >> PS - WeeWX is working perfectly. But I have WeeWX installed on an Orange >> Pi PC (1.3GHz Quad, 1GB RAM). Shout if you want anymore information. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/ySocUy01e_M/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/7cffbaeb-c08c-4ddc-b0cc-ce4cda005b6do%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/7cffbaeb-c08c-4ddc-b0cc-ce4cda005b6do%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAL93hP8K-MmzwfyT06RuE0P-QbvNKdqsFjYF7aDcowMa_sBkXw%40mail.gmail.com.
