as soon as I posted this, I saw my mistake, I used the wrong backup for my sensors. I believe I have the correct endings for my station with the ".obs_st" for the Tempest. I will see if that corrects it
On Saturday, October 3, 2020 at 2:05:11 PM UTC-5 James Fritz wrote: > '# Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = WeatherFlow > > [WeatherFlowUDP] > driver = user.weatherflowudp > log_raw_packets = False > udp_address = <broadcast> > # udp_address = 0.0.0.0 > # udp_address = 255.255.255.255 > udp_port = 50222 > udp_timeout = 90 > > [[sensor_map]] > outTemp = air_temperature.ST-00011505.obs_air > outTemp2 = air_temperature.ST-00011505.obs_air > outHumidity = relative_humidity.ST-00011505.obs_air > outHumidity2 = relative_humidity.ST-00011505.obs_air > pressure = station_pressure.ST-00011505.obs_air > lightning_strikes = lightning_strike_count.ST-00011505.obs_air > avg_distance = lightning_strike_avg_distance.ST-00011505.obs_air > outTempBatteryStatus = battery.ST-00011505.obs_air > windSpeed = wind_speed.ST-00011505.rapid_wind > windDir = wind_direction.ST-00011505.rapid_wind > lux = illuminance.ST-00011505.obs_sky > UV = uv.ST-00011505.obs_sky > rain = rain_accumulated.ST-00011505.obs_sky > windBatteryStatus = battery.ST-00011505.obs_sky > radiation = solar_radiation.ST-00011505.obs_sky > lightningYYY = distance.ST-00011505.evt_strike > lightningZZZ = energy.ST-00011505.evt_strike > > # If you have a website, you may specify an URL > #station_url = http://www.example.com '' > > > On Saturday, October 3, 2020 at 12:14:53 PM UTC-5 vince wrote: > >> On Saturday, October 3, 2020 at 8:51:22 AM UTC-7, James Fritz wrote: >>> >>> I installed weewx then the UDP driver for weatherflow. I had it working >>> for the local webpage for data coming in. I then tried to install the >>> Belchertwon skin and was having problems there, so I uninstalled >>> Belchertown, could not get original setup to work, so I reinstalled Weewx & >>> the weatherflow udp driver. >>> I have set up my weewx.cong file, but do not seem to be getting any data >>> to return to the local webpage now. I am not sure what I am missing or >>> where the problem lies. >>> >>> >>> >> The usual issue is people not editing in 'their' sensor id into the >> sensor map in weewx.conf, or not even having a sensor map at all. >> >> Post your WF section from weewx.conf so we can take a look. >> >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0ea8fe4c-3d1e-48ca-afa9-d68e3a71aae0n%40googlegroups.com.
