this is the error I can find, not sure how to fix: Oct 3 17:36:05 raspberryWeather kernel: [ 5472.665286] wlan0: authentication with 30:23:03:6b:2a:df timed out
On Saturday, October 3, 2020 at 2:53:01 PM UTC-5 James Fritz wrote: > I have the correct sensor information in now, but the page is still > showing the original date of install and sample temps and winds. I have > rebooted after changes. new config sensor: > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = WeatherFlow > > [WeatherFlowUDP] > driver = user.weatherflowudp > log_raw_packets = False > udp_address = <broadcast> > # udp_address = 0.0.0.0 > # udp_address = 255.255.255.255 > udp_port = 50222 > udp_timeout = 90 > > [[sensor_map]] > outTemp = air_temperature.ST-00011505.obs_st > outHumidity = relative_humidity.ST-00011505.obs_st > pressure = station_pressure.ST-00011505.obs_st > lightning_strikes = lightning_strike_count.ST-00011505.obs_st > avg_distance = lightning_strike_avg_distance.ST-00011505.obs_st > outTempBatteryStatus = battery.ST-00011505.obs_st > windSpeed = wind_speed.ST-00011505.rapid_wind > windDir = wind_direction.ST-00011505.rapid_wind > lux = illuminance.ST-00011505.obs_st > UV = uv.ST-00011505.obs_st > rain = rain_accumulated.ST-00011505.obs_st > BatteryStatus = battery.ST-00011505.obs_st > radiation = solar_radiation.ST-00011505.obs_st > lightningYYY = distance.ST-00011505.evt_strike > lightningZZZ = energy.ST-00011505.evt_strike > > # If you have a website, you may specify an URL > > On Saturday, October 3, 2020 at 2:11:16 PM UTC-5 James Fritz wrote: > >> as soon as I posted this, I saw my mistake, I used the wrong backup for >> my sensors. I believe I have the correct endings for my station with the >> ".obs_st" for the Tempest. I will see if that corrects it >> >> On Saturday, October 3, 2020 at 2:05:11 PM UTC-5 James Fritz wrote: >> >>> '# Set to type of station hardware. There must be a corresponding stanza >>> # in this file with a 'driver' parameter indicating the driver to be >>> used. >>> station_type = WeatherFlow >>> >>> [WeatherFlowUDP] >>> driver = user.weatherflowudp >>> log_raw_packets = False >>> udp_address = <broadcast> >>> # udp_address = 0.0.0.0 >>> # udp_address = 255.255.255.255 >>> udp_port = 50222 >>> udp_timeout = 90 >>> >>> [[sensor_map]] >>> outTemp = air_temperature.ST-00011505.obs_air >>> outTemp2 = air_temperature.ST-00011505.obs_air >>> outHumidity = relative_humidity.ST-00011505.obs_air >>> outHumidity2 = relative_humidity.ST-00011505.obs_air >>> pressure = station_pressure.ST-00011505.obs_air >>> lightning_strikes = lightning_strike_count.ST-00011505.obs_air >>> avg_distance = lightning_strike_avg_distance.ST-00011505.obs_air >>> outTempBatteryStatus = battery.ST-00011505.obs_air >>> windSpeed = wind_speed.ST-00011505.rapid_wind >>> windDir = wind_direction.ST-00011505.rapid_wind >>> lux = illuminance.ST-00011505.obs_sky >>> UV = uv.ST-00011505.obs_sky >>> rain = rain_accumulated.ST-00011505.obs_sky >>> windBatteryStatus = battery.ST-00011505.obs_sky >>> radiation = solar_radiation.ST-00011505.obs_sky >>> lightningYYY = distance.ST-00011505.evt_strike >>> lightningZZZ = energy.ST-00011505.evt_strike >>> >>> # If you have a website, you may specify an URL >>> #station_url = http://www.example.com '' >>> >>> >>> On Saturday, October 3, 2020 at 12:14:53 PM UTC-5 vince wrote: >>> >>>> On Saturday, October 3, 2020 at 8:51:22 AM UTC-7, James Fritz wrote: >>>>> >>>>> I installed weewx then the UDP driver for weatherflow. I had it >>>>> working for the local webpage for data coming in. I then tried to >>>>> install >>>>> the Belchertwon skin and was having problems there, so I uninstalled >>>>> Belchertown, could not get original setup to work, so I reinstalled Weewx >>>>> & >>>>> the weatherflow udp driver. >>>>> I have set up my weewx.cong file, but do not seem to be getting any >>>>> data to return to the local webpage now. I am not sure what I am missing >>>>> or where the problem lies. >>>>> >>>>> >>>>> >>>> The usual issue is people not editing in 'their' sensor id into the >>>> sensor map in weewx.conf, or not even having a sensor map at all. >>>> >>>> Post your WF section from weewx.conf so we can take a look. >>>> >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4be12925-a565-4eeb-896f-3fb3cd21699fn%40googlegroups.com.
