Here a comparison of three outputs, first as GW1000.service , then as
gw1000 driver and finally the current working ecowitt-client by the
interceptor driver:
# PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-driver
Using configuration file /etc/weewx/weewx.conf
Interrogating GW1000 at 192.168.100.150:45000
2020-12-12 17:55:00 CET (1607792100): UV: 0, dateTime: 1607792100, dayRain:
0.0, daymaxwind: 7.7, inHumidity: 59, inTemp: 17.7, luminosity: 0.0,
monthRain: 5.7, outHumidity: 93, outTemp: 2.7, pressure: 999.0, rain: None,
rainRate: 0.0, relbarometer: 1003.1, stormRain: 0.0, usUnits: 17,
uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: 70, windGust: 2.6,
windSpeed: 1.0, yearRain: 729.9
# PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-service
Using configuration file /etc/weewx/weewx.conf
Interrogating GW1000 at 192.168.100.150:45000
LOOP: 2020-12-12 17:56:02 CET (1607792162) UV: 0, dateTime: 1607792162,
dayRain: 0.0, daymaxwind: 7.7, dummyTemp: 96.3, inHumidity: 59, inTemp:
63.86, luminosity: 0.0, monthRain: 0.22440944881889766, outHumidity: 94,
outTemp: 36.86, pressure: 29.5004575125, rain: None, rainRate: 0.0,
relbarometer: 1003.1, stormRain: 0.0, usUnits: 1, uvradiation: 0.1,
weekRain: 3.1, wh65_batt: 0, windDir: 77, windGust: 4.473883703878609,
windSpeed: 2.6843302223271652, yearRain: 28.736220472440944
LOOP: 2020-12-12 17:56:12 CET (1607792172) dateTime: 1607792172,
dummyTemp: 96.3, usUnits: 1
# PYTHONPATH=/usr/share/weewx python3 user/interceptor.py
--device=ecowitt-client --mode=listen --port=9000
mapped packet: {'dateTime': 1607792207, 'usUnits': 1, 'pressure': 29.492,
'barometer': 29.613, 'outHumidity': 94.0, 'inHumidity': 58.0, 'outTemp':
36.9, 'inTemp': 63.9, 'windSpeed': 2.46, 'windGust': 5.82, 'windDir':
108.0, 'radiation': 0.0, 'rain': None, 'rainRate': 0.0, 'rainEvent': 0.0,
'UV': 0.0, 'txBatteryStatus': 0.0}
The windGustDir does not seem to be emitted. There are two other issues: "
rainEvent" and "txBatteryStatus" are missing in the GW1000 data or are not
mapped correctly. Thus, Weewx shows no results for Rain Event, and
indicates a low transmitter battery status. I would like to move to the
GW1000 driver (or better use GW1000.service?), if it would work
flawlessly. But it would be nice, to know, how to proceed now.
I had GW1000.service activated in parallel to the interceptor driver,
although this is somewhat nonsense, as both data come from the same
sensors, either "translated" to Ecowitt style by the GW1000, or pulled by
the GW1000.service directly. This I did just for a short time to see, if
there were any errors occuring. Although the raw data seem not to be
comparable, I could not see any effect. Actually I went back to the
interceptor driver, so at least rainEvent and the battery status are ok
again.
[email protected] schrieb am Samstag, 12. Dezember 2020 um 15:20:29 UTC+1:
> I do not think your problem is related to the "weighting" problem. It
> affected only the daily summaries and, even then, only fields that are
> weighted by the archive length. Wind direction is not one of them.
>
> Unfortunately, I am not very familiar with any of the drivers and services
> you are using. If I understand correctly, the data in question was
> collected by interceptor.py. I would assume that's where the problem is.
> Does the driver emit windGustDir on every LOOP packet? Or, does it rely on
> software record generation to provide it at the end of an archive period?
>
> Sorry I cannot be of more help.
>
> -tk
>
> On Thu, Dec 10, 2020 at 11:29 AM Vetti52 <[email protected]> wrote:
>
>> So, I am still not sure, if wee_database --update or --reweight should
>> solve the problem. Or do I have to wait for a special fix?
>>
>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 21:01:56 UTC+1:
>>
>>> BTW, there are some values not null in the database after update, as
>>> seen, when filtering the archive for windGustDir <> null:
>>> dateTime windGustDir
>>> 2020-12-08 10:50:00 89.0
>>> 2020-12-08 05:35:00 95.0
>>> 2020-12-08 01:25:00 148.0
>>> 2020-12-07 22:20:00 168.0
>>> 2020-12-05 01:35:00 120.0
>>> 2020-12-04 22:00:00 101.0
>>>
>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 19:33:13 UTC+1:
>>>
>>>> tha update was on 2020-12-04, right.
>>>>
>>>> at 1.
>>>> I am running Weewx on a Raspi4 under buster, installed with apt-get
>>>> install weewx. My station is a EFWS2500, which is a clone of Ecowitt 2500.
>>>> The data are collected by a Froggit DS2500, which is a clone of GW1000.
>>>> Weewx still collects the data from interceptor.py ecowitt-client. Although
>>>> user.gw1000 is already implemented as a service, I still have not yet
>>>> replaced interceptor.py.
>>>>
>>>> at 2.
>>>> didn't detect ignore_zero_wind in weewx.conf.
>>>>
>>>> at 3.
>>>> record_generation = software
>>>>
>>>> HTH
>>>>
>>>> Thanks
>>>> -ph
>>>>
>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um 18:42:04
>>>> UTC+1:
>>>>
>>>>> Thanks.
>>>>>
>>>>> I assume you updated on 2020-12-04? There is no value for "max_dir"
>>>>> (which is where "gust_dir" comes from) in your daily summaries since that
>>>>> date.
>>>>>
>>>>> Looking through your daily summaries, you are suffering from issue
>>>>> #623 <https://github.com/weewx/weewx/issues/623> (as are most V4.2
>>>>> users). I am working on a fix for this. However, as far as I know, this
>>>>> problem should not be affecting max_dir, but I may be missing something.
>>>>>
>>>>> A few questions:
>>>>> 1. What kind of hardware?
>>>>> 2. What is your setting for option ignore_zero_wind, if any?
>>>>> 3. What is your setting for option record_generation?
>>>>>
>>>>> -tk
>>>>>
>>>>>
>>>>> On Tue, Dec 8, 2020 at 8:44 AM Vetti52 <[email protected]> wrote:
>>>>>
>>>>>> It says "N/A".
>>>>>>
>>>>>> The output of sqlite:
>>>>>>
>>>>>> 2020-12-08
>>>>>> 00:00:00|1607382000|0.0|1607382032|10.29|1607442892|148.553777777778|211|148.553777777778|211||141.25403836784|8.54431223906981|211|307.861736888889|307.861736888889
>>>>>> 2020-12-07
>>>>>> 00:00:00|1607295600|0.0|1607295628|18.34|1607348466|969.075666666667|288|969.075666666667|288||563.975677916051|-355.104682689556|288|4027.90666114815|4027.90666114815
>>>>>> 2020-12-06
>>>>>> 00:00:00|1607209200|0.0|1607209233|9.17|1607219761|77.5104166666667|286|77.5104166666667|286||69.480956552117|2.39263945299658|286|132.33436038966|132.33436038966
>>>>>> 2020-12-05
>>>>>> 00:00:00|1607122800|0.0|1607123329|12.53|1607140258|550.433333333334|288|550.433333333334|288||357.29020463216|-182.82480166047|288|1638.89117222222|1638.89117222222
>>>>>> 2020-12-04
>>>>>> 00:00:00|1607036400|0.0|1607039337|20.58|1607050956|806.906472222223|288|806.906472222223|288||609.110049598142|-419.170693241216|288|2757.25666137114|2757.25666137114
>>>>>> 2020-12-03
>>>>>> 00:00:00|1606950000|0.0|1606950381|14.76|1606982936|938.132555555555|286|161542.062333333|52611|136.0|63684.8752720733|-143160.707316072|52611|3367.86934245679|550406.753590012
>>>>>> 2020-12-02
>>>>>> 00:00:00|1606863600|0.0|1606863628|10.29|1606933960|298.527702380952|288|89558.3107142857|86400|97.0|42277.4937890549|-72643.1316507023|61200|647.727487337254|194318.246201176
>>>>>> 2020-12-01
>>>>>> 00:00:00|1606777200|0.0|1606778615|9.17|1606778252|265.736888888889|288|79721.0666666667|86400|194.0|42931.7123928354|-43844.9965062139|69900|434.78745508642|130436.236525926
>>>>>> 2020-11-30
>>>>>> 00:00:00|1606690800|0.0|1606690818|12.53|1606753726|458.85391053391|287|137656.173160173|86100|138.0|-43283.5066028223|-120674.014788181|77100|1142.32670378797|342698.01113639
>>>>>> 2020-11-29
>>>>>> 00:00:00|1606604400|0.0|1606604418|5.82|1606650983|50.8892222222223|288|15266.7666666667|86400|309.0|-11596.0986434007|7995.68851878374|24600|54.2518490740741|16275.5547222222
>>>>>> 2020-11-28
>>>>>> 00:00:00|1606518000|0.0|1606518015|11.41|1606565426|165.474444444445|287|49642.3333333333|86100|63.0|47302.3988525243|1887.80479760903|28200|423.739858888889|127121.957666667
>>>>>> 2020-11-27
>>>>>> 00:00:00|1606431600|0.0|1606431616|4.47|1606483066|9.17855555555556|288|2753.56666666667|86400|131.0|2261.0873478704|-539.506810163124|4200|10.6575301851852|3197.25905555556
>>>>>> 2020-11-26
>>>>>> 00:00:00|1606345200|0.0|1606345204|8.05|1606394153|107.788222222222|287|32336.4666666667|86100|259.0|-25803.5675497035|-15488.3625339286|42000|134.601425382716|40380.4276148148
>>>>>> 2020-11-25
>>>>>> 00:00:00|1606258800|0.0|1606258804|9.17|1606302300|337.383111111111|288|101214.933333333|86400|189.0|-19895.5174799498|-97556.2211722166|76500|636.16824345679|190850.473037037
>>>>>> 2020-11-24
>>>>>> 00:00:00|1606172400|0.0|1606172999|10.29|1606187816|577.891555555556|288|173367.466666667|86400|213.0|-90246.0852000086|-146738.507905923|86400|1319.29265822222|395787.797466666
>>>>>> 2020-11-23
>>>>>> 00:00:00|1606086000|0.0|1606086005|10.29|1606137950|368.728555555556|288|110618.566666667|86400|261.0|-97191.5602413715|-50554.3362971601|72300|718.446958555555|215534.087566667
>>>>>> 2020-11-22
>>>>>> 00:00:00|1605999600|0.0|1606008451|14.76|1606041552|645.880888888889|288|193764.266666666|86400|245.0|-171272.270757009|-84245.3229881982|73500|2109.85465123457|632956.39537037
>>>>>> 2020-11-21
>>>>>> 00:00:00|1605913200|0.0|1605913439|15.88|1605942546|1114.47377777778|288|334342.133333333|86400|191.0|-175428.251363656|-273150.682819638|86400|4553.4892182716|1366046.76548148
>>>>>> 2020-11-20
>>>>>> 00:00:00|1605826800|0.0|1605826872|9.17|1605833902|169.842222222222|288|50952.6666666667|86400|238.0|-42329.2825046772|-24698.2615292903|59400|247.763276197531|74328.9828592593
>>>>>> 2020-11-19
>>>>>> 00:00:00|1605740400|0.0|1605798095|22.82|1605788229|919.519666666666|288|275855.9|86400|255.0|-208559.830853793|-91789.2604135498|82800|3926.4786627037|1177943.59881111
>>>>>>
>>>>>>
>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um 17:30:54
>>>>>> UTC+1:
>>>>>>
>>>>>>> What do you mean by, "there are no longer windDir data in the hi/lo
>>>>>>> section"? Is there a placeholder? Or, white space? Or, N/A?
>>>>>>>
>>>>>>> It might be worth seeing what is in your database. This assumes your
>>>>>>> database is located at /var/lib/weewx/weewx.sdb. If you used the
>>>>>>> setup.py
>>>>>>> install method, it would be at /home/weewx/archive/weewx.sdb.
>>>>>>>
>>>>>>> *sqlite3 /var/lib/weewx/weewx.sdb*
>>>>>>> sqlite> *select datetime(dateTime, 'unixepoch', 'localtime'), *
>>>>>>> from archive_day_wind order by dateTime desc limit 20;*
>>>>>>> sqlite> *.quit*
>>>>>>>
>>>>>>> -tk
>>>>>>>
>>>>>>> On Tue, Dec 8, 2020 at 8:15 AM Vetti52 <[email protected]> wrote:
>>>>>>>
>>>>>>>> Since update to version 4.2.0, I have a curious result in season
>>>>>>>> skin. Although $current.windDir is properly displayed and continuously
>>>>>>>> collected, there are no longer windDir data in the hi/lo section. Wind
>>>>>>>> Max
>>>>>>>> shows speed correctly, but no direction. I checked hilo.inc. There are
>>>>>>>> no
>>>>>>>> changes, compared to the original version (hilo.inc.dpkg-dist dated
>>>>>>>> from
>>>>>>>> 2020-04-30).
>>>>>>>>
>>>>>>>> Where should I start to trace the bug?
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to [email protected].
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com
>>>>>>>>
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>>
>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com
>>>>>>
>>>>>> <https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com.
