That last version was not an instrumented version. It was intended to fix the problem. Do you now see values for $month.wind.gustdir, and so on?
On Sun, Dec 13, 2020 at 1:24 PM Vetti52 <[email protected]> wrote: > ok, here we are: > > > [email protected] schrieb am Sonntag, 13. Dezember 2020 um 19:10:51 UTC+1: > >> I see the problem. It's a subtle bug. Try this version of accum.py. >> >> -tk >> >> On Sun, Dec 13, 2020 at 9:43 AM Vetti52 <[email protected]> wrote: >> >>> ok, this time, I think, I got several loop in. Sorry... >>> >>> >>> >>> [email protected] schrieb am Sonntag, 13. Dezember 2020 um 17:14:26 >>> UTC+1: >>> >>>> OK, looks like the gust direction is not getting added to >>>> the accumulators. Same drill: replace your copy of accum.py with this one. >>>> >>>> Make sure you let it run through the first reporting cycle. In your >>>> first run, you stopped it a bit too early. >>>> >>>> -tk >>>> >>>> On Sun, Dec 13, 2020 at 6:42 AM Vetti52 <[email protected]> wrote: >>>> >>>>> Just to complete the log file, I restarted again using GW1000 driver, >>>>> which I would like to use, as sson as the missing . Looks different. >>>>> >>>>> HTH >>>>> >>>>> --ph >>>>> >>>>> Vetti52 schrieb am Sonntag, 13. Dezember 2020 um 15:27:27 UTC+1: >>>>> >>>>>> Here is the result >>>>>> >>>>>> Thanks >>>>>> -ph >>>>>> >>>>>> BTW, I had a look at the most recent thread, presenting a greek >>>>>> version ( >>>>>> https://groups.google.com/g/weewx-user/c/h7nEzNRpNhM/m/tCXM0sgYAgAJ). >>>>>> There seems to be the same problem with N/A for windGustDir. >>>>>> [email protected] schrieb am Samstag, 12. Dezember 2020 um 23:33:28 >>>>>> UTC+1: >>>>>> >>>>>>> That tells us that the driver is not emitting windGustDir, but it's >>>>>>> not telling us why it cannot be extracted out of the accumulators by >>>>>>> WeeWX. >>>>>>> >>>>>>> Attached is an instrumented version of accum.py. Swap the version >>>>>>> you have with it. It should be in /usr/share/weewx/weewx/accum.py. >>>>>>> >>>>>>> Set debug=1, restart weewx, then let it run through the first >>>>>>> reporting cycle. Post the log. >>>>>>> >>>>>>> -tk >>>>>>> >>>>>>> On Sat, Dec 12, 2020 at 9:33 AM Vetti52 <[email protected]> wrote: >>>>>>> >>>>>>>> Here a comparison of three outputs, first as GW1000.service , then >>>>>>>> as gw1000 driver and finally the current working ecowitt-client by the >>>>>>>> interceptor driver: >>>>>>>> >>>>>>>> # PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-driver >>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>> Interrogating GW1000 at 192.168.100.150:45000 >>>>>>>> 2020-12-12 17:55:00 CET (1607792100): UV: 0, dateTime: 1607792100, >>>>>>>> dayRain: 0.0, daymaxwind: 7.7, inHumidity: 59, inTemp: 17.7, >>>>>>>> luminosity: >>>>>>>> 0.0, monthRain: 5.7, outHumidity: 93, outTemp: 2.7, pressure: 999.0, >>>>>>>> rain: >>>>>>>> None, rainRate: 0.0, relbarometer: 1003.1, stormRain: 0.0, usUnits: 17, >>>>>>>> uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: 70, windGust: >>>>>>>> 2.6, >>>>>>>> windSpeed: 1.0, yearRain: 729.9 >>>>>>>> >>>>>>>> # PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-service >>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>> Interrogating GW1000 at 192.168.100.150:45000 >>>>>>>> LOOP: 2020-12-12 17:56:02 CET (1607792162) UV: 0, dateTime: >>>>>>>> 1607792162, dayRain: 0.0, daymaxwind: 7.7, dummyTemp: 96.3, >>>>>>>> inHumidity: 59, >>>>>>>> inTemp: 63.86, luminosity: 0.0, monthRain: 0.22440944881889766, >>>>>>>> outHumidity: 94, outTemp: 36.86, pressure: 29.5004575125, rain: None, >>>>>>>> rainRate: 0.0, relbarometer: 1003.1, stormRain: 0.0, usUnits: 1, >>>>>>>> uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: 77, windGust: >>>>>>>> 4.473883703878609, windSpeed: 2.6843302223271652, yearRain: >>>>>>>> 28.736220472440944 >>>>>>>> LOOP: 2020-12-12 17:56:12 CET (1607792172) dateTime: 1607792172, >>>>>>>> dummyTemp: 96.3, usUnits: 1 >>>>>>>> >>>>>>>> # PYTHONPATH=/usr/share/weewx python3 user/interceptor.py >>>>>>>> --device=ecowitt-client --mode=listen --port=9000 >>>>>>>> mapped packet: {'dateTime': 1607792207, 'usUnits': 1, 'pressure': >>>>>>>> 29.492, 'barometer': 29.613, 'outHumidity': 94.0, 'inHumidity': 58.0, >>>>>>>> 'outTemp': 36.9, 'inTemp': 63.9, 'windSpeed': 2.46, 'windGust': 5.82, >>>>>>>> 'windDir': 108.0, 'radiation': 0.0, 'rain': None, 'rainRate': 0.0, >>>>>>>> 'rainEvent': 0.0, 'UV': 0.0, 'txBatteryStatus': 0.0} >>>>>>>> >>>>>>>> The windGustDir does not seem to be emitted. There are two other >>>>>>>> issues: "rainEvent" and "txBatteryStatus" are missing in the >>>>>>>> GW1000 data or are not mapped correctly. Thus, Weewx shows no results >>>>>>>> for >>>>>>>> Rain Event, and indicates a low transmitter battery status. I would >>>>>>>> like to >>>>>>>> move to the GW1000 driver (or better use GW1000.service?), if it would >>>>>>>> work >>>>>>>> flawlessly. But it would be nice, to know, how to proceed now. >>>>>>>> >>>>>>>> I had GW1000.service activated in parallel to the interceptor >>>>>>>> driver, although this is somewhat nonsense, as both data come from the >>>>>>>> same >>>>>>>> sensors, either "translated" to Ecowitt style by the GW1000, or pulled >>>>>>>> by >>>>>>>> the GW1000.service directly. This I did just for a short time to see, >>>>>>>> if >>>>>>>> there were any errors occuring. Although the raw data seem not to be >>>>>>>> comparable, I could not see any effect. Actually I went back to the >>>>>>>> interceptor driver, so at least rainEvent and the battery status are ok >>>>>>>> again. >>>>>>>> [email protected] schrieb am Samstag, 12. Dezember 2020 um 15:20:29 >>>>>>>> UTC+1: >>>>>>>> >>>>>>>>> I do not think your problem is related to the "weighting" problem. >>>>>>>>> It affected only the daily summaries and, even then, only fields that >>>>>>>>> are >>>>>>>>> weighted by the archive length. Wind direction is not one of them. >>>>>>>>> >>>>>>>>> Unfortunately, I am not very familiar with any of the drivers and >>>>>>>>> services you are using. If I understand correctly, the data in >>>>>>>>> question was >>>>>>>>> collected by interceptor.py. I would assume that's where the problem >>>>>>>>> is. >>>>>>>>> Does the driver emit windGustDir on every LOOP packet? Or, does it >>>>>>>>> rely on >>>>>>>>> software record generation to provide it at the end of an archive >>>>>>>>> period? >>>>>>>>> >>>>>>>>> Sorry I cannot be of more help. >>>>>>>>> >>>>>>>>> -tk >>>>>>>>> >>>>>>>>> On Thu, Dec 10, 2020 at 11:29 AM Vetti52 <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> So, I am still not sure, if wee_database --update or --reweight >>>>>>>>>> should >>>>>>>>>> solve the problem. Or do I have to wait for a special fix? >>>>>>>>>> >>>>>>>>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 21:01:56 UTC+1: >>>>>>>>>> >>>>>>>>>>> BTW, there are some values not null in the database after >>>>>>>>>>> update, as seen, when filtering the archive for windGustDir <> >>>>>>>>>>> null: >>>>>>>>>>> dateTime windGustDir >>>>>>>>>>> 2020-12-08 10:50:00 89.0 >>>>>>>>>>> 2020-12-08 05:35:00 95.0 >>>>>>>>>>> 2020-12-08 01:25:00 148.0 >>>>>>>>>>> 2020-12-07 22:20:00 168.0 >>>>>>>>>>> 2020-12-05 01:35:00 120.0 >>>>>>>>>>> 2020-12-04 22:00:00 101.0 >>>>>>>>>>> >>>>>>>>>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 19:33:13 UTC+1: >>>>>>>>>>> >>>>>>>>>>>> tha update was on 2020-12-04, right. >>>>>>>>>>>> >>>>>>>>>>>> at 1. >>>>>>>>>>>> I am running Weewx on a Raspi4 under buster, installed with >>>>>>>>>>>> apt-get install weewx. My station is a EFWS2500, which is a clone >>>>>>>>>>>> of >>>>>>>>>>>> Ecowitt 2500. The data are collected by a Froggit DS2500, which is >>>>>>>>>>>> a clone >>>>>>>>>>>> of GW1000. Weewx still collects the data from interceptor.py >>>>>>>>>>>> ecowitt-client. Although user.gw1000 is already implemented as a >>>>>>>>>>>> service, >>>>>>>>>>>> I still have not yet replaced interceptor.py. >>>>>>>>>>>> >>>>>>>>>>>> at 2. >>>>>>>>>>>> didn't detect ignore_zero_wind in weewx.conf. >>>>>>>>>>>> >>>>>>>>>>>> at 3. >>>>>>>>>>>> record_generation = software >>>>>>>>>>>> >>>>>>>>>>>> HTH >>>>>>>>>>>> >>>>>>>>>>>> Thanks >>>>>>>>>>>> -ph >>>>>>>>>>>> >>>>>>>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um >>>>>>>>>>>> 18:42:04 UTC+1: >>>>>>>>>>>> >>>>>>>>>>>>> Thanks. >>>>>>>>>>>>> >>>>>>>>>>>>> I assume you updated on 2020-12-04? There is no value for >>>>>>>>>>>>> "max_dir" (which is where "gust_dir" comes from) in your daily >>>>>>>>>>>>> summaries >>>>>>>>>>>>> since that date. >>>>>>>>>>>>> >>>>>>>>>>>>> Looking through your daily summaries, you are suffering from >>>>>>>>>>>>> issue #623 <https://github.com/weewx/weewx/issues/623> (as >>>>>>>>>>>>> are most V4.2 users). I am working on a fix for this. However, as >>>>>>>>>>>>> far as I >>>>>>>>>>>>> know, this problem should not be affecting max_dir, but I may be >>>>>>>>>>>>> missing >>>>>>>>>>>>> something. >>>>>>>>>>>>> >>>>>>>>>>>>> A few questions: >>>>>>>>>>>>> 1. What kind of hardware? >>>>>>>>>>>>> 2. What is your setting for option ignore_zero_wind, if any? >>>>>>>>>>>>> 3. What is your setting for option record_generation? >>>>>>>>>>>>> >>>>>>>>>>>>> -tk >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, Dec 8, 2020 at 8:44 AM Vetti52 <[email protected]> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> It says "N/A". >>>>>>>>>>>>>> >>>>>>>>>>>>>> The output of sqlite: >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2020-12-08 >>>>>>>>>>>>>> 00:00:00|1607382000|0.0|1607382032|10.29|1607442892|148.553777777778|211|148.553777777778|211||141.25403836784|8.54431223906981|211|307.861736888889|307.861736888889 >>>>>>>>>>>>>> 2020-12-07 >>>>>>>>>>>>>> 00:00:00|1607295600|0.0|1607295628|18.34|1607348466|969.075666666667|288|969.075666666667|288||563.975677916051|-355.104682689556|288|4027.90666114815|4027.90666114815 >>>>>>>>>>>>>> 2020-12-06 >>>>>>>>>>>>>> 00:00:00|1607209200|0.0|1607209233|9.17|1607219761|77.5104166666667|286|77.5104166666667|286||69.480956552117|2.39263945299658|286|132.33436038966|132.33436038966 >>>>>>>>>>>>>> 2020-12-05 >>>>>>>>>>>>>> 00:00:00|1607122800|0.0|1607123329|12.53|1607140258|550.433333333334|288|550.433333333334|288||357.29020463216|-182.82480166047|288|1638.89117222222|1638.89117222222 >>>>>>>>>>>>>> 2020-12-04 >>>>>>>>>>>>>> 00:00:00|1607036400|0.0|1607039337|20.58|1607050956|806.906472222223|288|806.906472222223|288||609.110049598142|-419.170693241216|288|2757.25666137114|2757.25666137114 >>>>>>>>>>>>>> 2020-12-03 >>>>>>>>>>>>>> 00:00:00|1606950000|0.0|1606950381|14.76|1606982936|938.132555555555|286|161542.062333333|52611|136.0|63684.8752720733|-143160.707316072|52611|3367.86934245679|550406.753590012 >>>>>>>>>>>>>> 2020-12-02 >>>>>>>>>>>>>> 00:00:00|1606863600|0.0|1606863628|10.29|1606933960|298.527702380952|288|89558.3107142857|86400|97.0|42277.4937890549|-72643.1316507023|61200|647.727487337254|194318.246201176 >>>>>>>>>>>>>> 2020-12-01 >>>>>>>>>>>>>> 00:00:00|1606777200|0.0|1606778615|9.17|1606778252|265.736888888889|288|79721.0666666667|86400|194.0|42931.7123928354|-43844.9965062139|69900|434.78745508642|130436.236525926 >>>>>>>>>>>>>> 2020-11-30 >>>>>>>>>>>>>> 00:00:00|1606690800|0.0|1606690818|12.53|1606753726|458.85391053391|287|137656.173160173|86100|138.0|-43283.5066028223|-120674.014788181|77100|1142.32670378797|342698.01113639 >>>>>>>>>>>>>> 2020-11-29 >>>>>>>>>>>>>> 00:00:00|1606604400|0.0|1606604418|5.82|1606650983|50.8892222222223|288|15266.7666666667|86400|309.0|-11596.0986434007|7995.68851878374|24600|54.2518490740741|16275.5547222222 >>>>>>>>>>>>>> 2020-11-28 >>>>>>>>>>>>>> 00:00:00|1606518000|0.0|1606518015|11.41|1606565426|165.474444444445|287|49642.3333333333|86100|63.0|47302.3988525243|1887.80479760903|28200|423.739858888889|127121.957666667 >>>>>>>>>>>>>> 2020-11-27 >>>>>>>>>>>>>> 00:00:00|1606431600|0.0|1606431616|4.47|1606483066|9.17855555555556|288|2753.56666666667|86400|131.0|2261.0873478704|-539.506810163124|4200|10.6575301851852|3197.25905555556 >>>>>>>>>>>>>> 2020-11-26 >>>>>>>>>>>>>> 00:00:00|1606345200|0.0|1606345204|8.05|1606394153|107.788222222222|287|32336.4666666667|86100|259.0|-25803.5675497035|-15488.3625339286|42000|134.601425382716|40380.4276148148 >>>>>>>>>>>>>> 2020-11-25 >>>>>>>>>>>>>> 00:00:00|1606258800|0.0|1606258804|9.17|1606302300|337.383111111111|288|101214.933333333|86400|189.0|-19895.5174799498|-97556.2211722166|76500|636.16824345679|190850.473037037 >>>>>>>>>>>>>> 2020-11-24 >>>>>>>>>>>>>> 00:00:00|1606172400|0.0|1606172999|10.29|1606187816|577.891555555556|288|173367.466666667|86400|213.0|-90246.0852000086|-146738.507905923|86400|1319.29265822222|395787.797466666 >>>>>>>>>>>>>> 2020-11-23 >>>>>>>>>>>>>> 00:00:00|1606086000|0.0|1606086005|10.29|1606137950|368.728555555556|288|110618.566666667|86400|261.0|-97191.5602413715|-50554.3362971601|72300|718.446958555555|215534.087566667 >>>>>>>>>>>>>> 2020-11-22 >>>>>>>>>>>>>> 00:00:00|1605999600|0.0|1606008451|14.76|1606041552|645.880888888889|288|193764.266666666|86400|245.0|-171272.270757009|-84245.3229881982|73500|2109.85465123457|632956.39537037 >>>>>>>>>>>>>> 2020-11-21 >>>>>>>>>>>>>> 00:00:00|1605913200|0.0|1605913439|15.88|1605942546|1114.47377777778|288|334342.133333333|86400|191.0|-175428.251363656|-273150.682819638|86400|4553.4892182716|1366046.76548148 >>>>>>>>>>>>>> 2020-11-20 >>>>>>>>>>>>>> 00:00:00|1605826800|0.0|1605826872|9.17|1605833902|169.842222222222|288|50952.6666666667|86400|238.0|-42329.2825046772|-24698.2615292903|59400|247.763276197531|74328.9828592593 >>>>>>>>>>>>>> 2020-11-19 >>>>>>>>>>>>>> 00:00:00|1605740400|0.0|1605798095|22.82|1605788229|919.519666666666|288|275855.9|86400|255.0|-208559.830853793|-91789.2604135498|82800|3926.4786627037|1177943.59881111 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um >>>>>>>>>>>>>> 17:30:54 UTC+1: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> What do you mean by, "there are no longer windDir data in >>>>>>>>>>>>>>> the hi/lo section"? Is there a placeholder? Or, white space? >>>>>>>>>>>>>>> Or, N/A? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> It might be worth seeing what is in your database. This >>>>>>>>>>>>>>> assumes your database is located at /var/lib/weewx/weewx.sdb. >>>>>>>>>>>>>>> If you used >>>>>>>>>>>>>>> the setup.py install method, it would be at >>>>>>>>>>>>>>> /home/weewx/archive/weewx.sdb. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *sqlite3 /var/lib/weewx/weewx.sdb* >>>>>>>>>>>>>>> sqlite> *select datetime(dateTime, 'unixepoch', >>>>>>>>>>>>>>> 'localtime'), * from archive_day_wind order by dateTime desc >>>>>>>>>>>>>>> limit 20;* >>>>>>>>>>>>>>> sqlite> *.quit* >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tue, Dec 8, 2020 at 8:15 AM Vetti52 <[email protected]> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Since update to version 4.2.0, I have a curious result in >>>>>>>>>>>>>>>> season skin. Although $current.windDir is properly displayed >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> continuously collected, there are no longer windDir data in >>>>>>>>>>>>>>>> the hi/lo >>>>>>>>>>>>>>>> section. Wind Max shows speed correctly, but no direction. I >>>>>>>>>>>>>>>> checked >>>>>>>>>>>>>>>> hilo.inc. There are no changes, compared to the original >>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>> (hilo.inc.dpkg-dist dated from 2020-04-30). >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Where should I start to trace the bug? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com >>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>>> >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/83d99b6d-863c-4424-afd6-74c119fd25f7n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/83d99b6d-863c-4424-afd6-74c119fd25f7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/b260aeab-db22-4a65-90a0-20cfa61bf408n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/b260aeab-db22-4a65-90a0-20cfa61bf408n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/f242a4ec-4759-4eb0-bb84-5374aa9530c9n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/f242a4ec-4759-4eb0-bb84-5374aa9530c9n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEAhrvVMMuk9ZKLe%2B1EaWSrAFW3%2By6Ky7-f%2BozMKrv8aCg%40mail.gmail.com.
