No, unfortunately still "N/A" in all of December values. [email protected] schrieb am Sonntag, 13. Dezember 2020 um 22:29:07 UTC+1:
> That last version was not an instrumented version. It was intended to fix > the problem. Do you now see values for $month.wind.gustdir, and so on? > > On Sun, Dec 13, 2020 at 1:24 PM Vetti52 <[email protected]> wrote: > >> ok, here we are: >> >> >> [email protected] schrieb am Sonntag, 13. Dezember 2020 um 19:10:51 UTC+1: >> >>> I see the problem. It's a subtle bug. Try this version of accum.py. >>> >>> -tk >>> >>> On Sun, Dec 13, 2020 at 9:43 AM Vetti52 <[email protected]> wrote: >>> >>>> ok, this time, I think, I got several loop in. Sorry... >>>> >>>> >>>> >>>> [email protected] schrieb am Sonntag, 13. Dezember 2020 um 17:14:26 >>>> UTC+1: >>>> >>>>> OK, looks like the gust direction is not getting added to >>>>> the accumulators. Same drill: replace your copy of accum.py with this one. >>>>> >>>>> Make sure you let it run through the first reporting cycle. In your >>>>> first run, you stopped it a bit too early. >>>>> >>>>> -tk >>>>> >>>>> On Sun, Dec 13, 2020 at 6:42 AM Vetti52 <[email protected]> wrote: >>>>> >>>>>> Just to complete the log file, I restarted again using GW1000 driver, >>>>>> which I would like to use, as sson as the missing . Looks different. >>>>>> >>>>>> HTH >>>>>> >>>>>> --ph >>>>>> >>>>>> Vetti52 schrieb am Sonntag, 13. Dezember 2020 um 15:27:27 UTC+1: >>>>>> >>>>>>> Here is the result >>>>>>> >>>>>>> Thanks >>>>>>> -ph >>>>>>> >>>>>>> BTW, I had a look at the most recent thread, presenting a greek >>>>>>> version ( >>>>>>> https://groups.google.com/g/weewx-user/c/h7nEzNRpNhM/m/tCXM0sgYAgAJ). >>>>>>> There seems to be the same problem with N/A for windGustDir. >>>>>>> [email protected] schrieb am Samstag, 12. Dezember 2020 um 23:33:28 >>>>>>> UTC+1: >>>>>>> >>>>>>>> That tells us that the driver is not emitting windGustDir, but it's >>>>>>>> not telling us why it cannot be extracted out of the accumulators by >>>>>>>> WeeWX. >>>>>>>> >>>>>>>> Attached is an instrumented version of accum.py. Swap the version >>>>>>>> you have with it. It should be in /usr/share/weewx/weewx/accum.py. >>>>>>>> >>>>>>>> Set debug=1, restart weewx, then let it run through the first >>>>>>>> reporting cycle. Post the log. >>>>>>>> >>>>>>>> -tk >>>>>>>> >>>>>>>> On Sat, Dec 12, 2020 at 9:33 AM Vetti52 <[email protected]> wrote: >>>>>>>> >>>>>>>>> Here a comparison of three outputs, first as GW1000.service , then >>>>>>>>> as gw1000 driver and finally the current working ecowitt-client by >>>>>>>>> the >>>>>>>>> interceptor driver: >>>>>>>>> >>>>>>>>> # PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-driver >>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>> Interrogating GW1000 at 192.168.100.150:45000 >>>>>>>>> 2020-12-12 17:55:00 CET (1607792100): UV: 0, dateTime: 1607792100, >>>>>>>>> dayRain: 0.0, daymaxwind: 7.7, inHumidity: 59, inTemp: 17.7, >>>>>>>>> luminosity: >>>>>>>>> 0.0, monthRain: 5.7, outHumidity: 93, outTemp: 2.7, pressure: 999.0, >>>>>>>>> rain: >>>>>>>>> None, rainRate: 0.0, relbarometer: 1003.1, stormRain: 0.0, usUnits: >>>>>>>>> 17, >>>>>>>>> uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: 70, windGust: >>>>>>>>> 2.6, >>>>>>>>> windSpeed: 1.0, yearRain: 729.9 >>>>>>>>> >>>>>>>>> # PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-service >>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>> Interrogating GW1000 at 192.168.100.150:45000 >>>>>>>>> LOOP: 2020-12-12 17:56:02 CET (1607792162) UV: 0, dateTime: >>>>>>>>> 1607792162, dayRain: 0.0, daymaxwind: 7.7, dummyTemp: 96.3, >>>>>>>>> inHumidity: 59, >>>>>>>>> inTemp: 63.86, luminosity: 0.0, monthRain: 0.22440944881889766, >>>>>>>>> outHumidity: 94, outTemp: 36.86, pressure: 29.5004575125, rain: None, >>>>>>>>> rainRate: 0.0, relbarometer: 1003.1, stormRain: 0.0, usUnits: 1, >>>>>>>>> uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: 77, windGust: >>>>>>>>> 4.473883703878609, windSpeed: 2.6843302223271652, yearRain: >>>>>>>>> 28.736220472440944 >>>>>>>>> LOOP: 2020-12-12 17:56:12 CET (1607792172) dateTime: 1607792172, >>>>>>>>> dummyTemp: 96.3, usUnits: 1 >>>>>>>>> >>>>>>>>> # PYTHONPATH=/usr/share/weewx python3 user/interceptor.py >>>>>>>>> --device=ecowitt-client --mode=listen --port=9000 >>>>>>>>> mapped packet: {'dateTime': 1607792207, 'usUnits': 1, 'pressure': >>>>>>>>> 29.492, 'barometer': 29.613, 'outHumidity': 94.0, 'inHumidity': 58.0, >>>>>>>>> 'outTemp': 36.9, 'inTemp': 63.9, 'windSpeed': 2.46, 'windGust': 5.82, >>>>>>>>> 'windDir': 108.0, 'radiation': 0.0, 'rain': None, 'rainRate': 0.0, >>>>>>>>> 'rainEvent': 0.0, 'UV': 0.0, 'txBatteryStatus': 0.0} >>>>>>>>> >>>>>>>>> The windGustDir does not seem to be emitted. There are two other >>>>>>>>> issues: "rainEvent" and "txBatteryStatus" are missing in the >>>>>>>>> GW1000 data or are not mapped correctly. Thus, Weewx shows no results >>>>>>>>> for >>>>>>>>> Rain Event, and indicates a low transmitter battery status. I would >>>>>>>>> like to >>>>>>>>> move to the GW1000 driver (or better use GW1000.service?), if it >>>>>>>>> would work >>>>>>>>> flawlessly. But it would be nice, to know, how to proceed now. >>>>>>>>> >>>>>>>>> I had GW1000.service activated in parallel to the interceptor >>>>>>>>> driver, although this is somewhat nonsense, as both data come from >>>>>>>>> the same >>>>>>>>> sensors, either "translated" to Ecowitt style by the GW1000, or >>>>>>>>> pulled by >>>>>>>>> the GW1000.service directly. This I did just for a short time to see, >>>>>>>>> if >>>>>>>>> there were any errors occuring. Although the raw data seem not to be >>>>>>>>> comparable, I could not see any effect. Actually I went back to the >>>>>>>>> interceptor driver, so at least rainEvent and the battery status are >>>>>>>>> ok >>>>>>>>> again. >>>>>>>>> [email protected] schrieb am Samstag, 12. Dezember 2020 um >>>>>>>>> 15:20:29 UTC+1: >>>>>>>>> >>>>>>>>>> I do not think your problem is related to the "weighting" >>>>>>>>>> problem. It affected only the daily summaries and, even then, only >>>>>>>>>> fields >>>>>>>>>> that are weighted by the archive length. Wind direction is not one >>>>>>>>>> of them. >>>>>>>>>> >>>>>>>>>> Unfortunately, I am not very familiar with any of the drivers and >>>>>>>>>> services you are using. If I understand correctly, the data in >>>>>>>>>> question was >>>>>>>>>> collected by interceptor.py. I would assume that's where the problem >>>>>>>>>> is. >>>>>>>>>> Does the driver emit windGustDir on every LOOP packet? Or, does it >>>>>>>>>> rely on >>>>>>>>>> software record generation to provide it at the end of an archive >>>>>>>>>> period? >>>>>>>>>> >>>>>>>>>> Sorry I cannot be of more help. >>>>>>>>>> >>>>>>>>>> -tk >>>>>>>>>> >>>>>>>>>> On Thu, Dec 10, 2020 at 11:29 AM Vetti52 <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> So, I am still not sure, if wee_database --update or --reweight >>>>>>>>>>> should >>>>>>>>>>> solve the problem. Or do I have to wait for a special fix? >>>>>>>>>>> >>>>>>>>>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 21:01:56 UTC+1: >>>>>>>>>>> >>>>>>>>>>>> BTW, there are some values not null in the database after >>>>>>>>>>>> update, as seen, when filtering the archive for windGustDir <> >>>>>>>>>>>> null: >>>>>>>>>>>> dateTime windGustDir >>>>>>>>>>>> 2020-12-08 10:50:00 89.0 >>>>>>>>>>>> 2020-12-08 05:35:00 95.0 >>>>>>>>>>>> 2020-12-08 01:25:00 148.0 >>>>>>>>>>>> 2020-12-07 22:20:00 168.0 >>>>>>>>>>>> 2020-12-05 01:35:00 120.0 >>>>>>>>>>>> 2020-12-04 22:00:00 101.0 >>>>>>>>>>>> >>>>>>>>>>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 19:33:13 UTC+1: >>>>>>>>>>>> >>>>>>>>>>>>> tha update was on 2020-12-04, right. >>>>>>>>>>>>> >>>>>>>>>>>>> at 1. >>>>>>>>>>>>> I am running Weewx on a Raspi4 under buster, installed with >>>>>>>>>>>>> apt-get install weewx. My station is a EFWS2500, which is a clone >>>>>>>>>>>>> of >>>>>>>>>>>>> Ecowitt 2500. The data are collected by a Froggit DS2500, which >>>>>>>>>>>>> is a clone >>>>>>>>>>>>> of GW1000. Weewx still collects the data from interceptor.py >>>>>>>>>>>>> ecowitt-client. Although user.gw1000 is already implemented as a >>>>>>>>>>>>> service, >>>>>>>>>>>>> I still have not yet replaced interceptor.py. >>>>>>>>>>>>> >>>>>>>>>>>>> at 2. >>>>>>>>>>>>> didn't detect ignore_zero_wind in weewx.conf. >>>>>>>>>>>>> >>>>>>>>>>>>> at 3. >>>>>>>>>>>>> record_generation = software >>>>>>>>>>>>> >>>>>>>>>>>>> HTH >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks >>>>>>>>>>>>> -ph >>>>>>>>>>>>> >>>>>>>>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um >>>>>>>>>>>>> 18:42:04 UTC+1: >>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I assume you updated on 2020-12-04? There is no value for >>>>>>>>>>>>>> "max_dir" (which is where "gust_dir" comes from) in your daily >>>>>>>>>>>>>> summaries >>>>>>>>>>>>>> since that date. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Looking through your daily summaries, you are suffering from >>>>>>>>>>>>>> issue #623 <https://github.com/weewx/weewx/issues/623> (as >>>>>>>>>>>>>> are most V4.2 users). I am working on a fix for this. However, >>>>>>>>>>>>>> as far as I >>>>>>>>>>>>>> know, this problem should not be affecting max_dir, but I may be >>>>>>>>>>>>>> missing >>>>>>>>>>>>>> something. >>>>>>>>>>>>>> >>>>>>>>>>>>>> A few questions: >>>>>>>>>>>>>> 1. What kind of hardware? >>>>>>>>>>>>>> 2. What is your setting for option ignore_zero_wind, if any? >>>>>>>>>>>>>> 3. What is your setting for option record_generation? >>>>>>>>>>>>>> >>>>>>>>>>>>>> -tk >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Dec 8, 2020 at 8:44 AM Vetti52 <[email protected]> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> It says "N/A". >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The output of sqlite: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2020-12-08 >>>>>>>>>>>>>>> 00:00:00|1607382000|0.0|1607382032|10.29|1607442892|148.553777777778|211|148.553777777778|211||141.25403836784|8.54431223906981|211|307.861736888889|307.861736888889 >>>>>>>>>>>>>>> 2020-12-07 >>>>>>>>>>>>>>> 00:00:00|1607295600|0.0|1607295628|18.34|1607348466|969.075666666667|288|969.075666666667|288||563.975677916051|-355.104682689556|288|4027.90666114815|4027.90666114815 >>>>>>>>>>>>>>> 2020-12-06 >>>>>>>>>>>>>>> 00:00:00|1607209200|0.0|1607209233|9.17|1607219761|77.5104166666667|286|77.5104166666667|286||69.480956552117|2.39263945299658|286|132.33436038966|132.33436038966 >>>>>>>>>>>>>>> 2020-12-05 >>>>>>>>>>>>>>> 00:00:00|1607122800|0.0|1607123329|12.53|1607140258|550.433333333334|288|550.433333333334|288||357.29020463216|-182.82480166047|288|1638.89117222222|1638.89117222222 >>>>>>>>>>>>>>> 2020-12-04 >>>>>>>>>>>>>>> 00:00:00|1607036400|0.0|1607039337|20.58|1607050956|806.906472222223|288|806.906472222223|288||609.110049598142|-419.170693241216|288|2757.25666137114|2757.25666137114 >>>>>>>>>>>>>>> 2020-12-03 >>>>>>>>>>>>>>> 00:00:00|1606950000|0.0|1606950381|14.76|1606982936|938.132555555555|286|161542.062333333|52611|136.0|63684.8752720733|-143160.707316072|52611|3367.86934245679|550406.753590012 >>>>>>>>>>>>>>> 2020-12-02 >>>>>>>>>>>>>>> 00:00:00|1606863600|0.0|1606863628|10.29|1606933960|298.527702380952|288|89558.3107142857|86400|97.0|42277.4937890549|-72643.1316507023|61200|647.727487337254|194318.246201176 >>>>>>>>>>>>>>> 2020-12-01 >>>>>>>>>>>>>>> 00:00:00|1606777200|0.0|1606778615|9.17|1606778252|265.736888888889|288|79721.0666666667|86400|194.0|42931.7123928354|-43844.9965062139|69900|434.78745508642|130436.236525926 >>>>>>>>>>>>>>> 2020-11-30 >>>>>>>>>>>>>>> 00:00:00|1606690800|0.0|1606690818|12.53|1606753726|458.85391053391|287|137656.173160173|86100|138.0|-43283.5066028223|-120674.014788181|77100|1142.32670378797|342698.01113639 >>>>>>>>>>>>>>> 2020-11-29 >>>>>>>>>>>>>>> 00:00:00|1606604400|0.0|1606604418|5.82|1606650983|50.8892222222223|288|15266.7666666667|86400|309.0|-11596.0986434007|7995.68851878374|24600|54.2518490740741|16275.5547222222 >>>>>>>>>>>>>>> 2020-11-28 >>>>>>>>>>>>>>> 00:00:00|1606518000|0.0|1606518015|11.41|1606565426|165.474444444445|287|49642.3333333333|86100|63.0|47302.3988525243|1887.80479760903|28200|423.739858888889|127121.957666667 >>>>>>>>>>>>>>> 2020-11-27 >>>>>>>>>>>>>>> 00:00:00|1606431600|0.0|1606431616|4.47|1606483066|9.17855555555556|288|2753.56666666667|86400|131.0|2261.0873478704|-539.506810163124|4200|10.6575301851852|3197.25905555556 >>>>>>>>>>>>>>> 2020-11-26 >>>>>>>>>>>>>>> 00:00:00|1606345200|0.0|1606345204|8.05|1606394153|107.788222222222|287|32336.4666666667|86100|259.0|-25803.5675497035|-15488.3625339286|42000|134.601425382716|40380.4276148148 >>>>>>>>>>>>>>> 2020-11-25 >>>>>>>>>>>>>>> 00:00:00|1606258800|0.0|1606258804|9.17|1606302300|337.383111111111|288|101214.933333333|86400|189.0|-19895.5174799498|-97556.2211722166|76500|636.16824345679|190850.473037037 >>>>>>>>>>>>>>> 2020-11-24 >>>>>>>>>>>>>>> 00:00:00|1606172400|0.0|1606172999|10.29|1606187816|577.891555555556|288|173367.466666667|86400|213.0|-90246.0852000086|-146738.507905923|86400|1319.29265822222|395787.797466666 >>>>>>>>>>>>>>> 2020-11-23 >>>>>>>>>>>>>>> 00:00:00|1606086000|0.0|1606086005|10.29|1606137950|368.728555555556|288|110618.566666667|86400|261.0|-97191.5602413715|-50554.3362971601|72300|718.446958555555|215534.087566667 >>>>>>>>>>>>>>> 2020-11-22 >>>>>>>>>>>>>>> 00:00:00|1605999600|0.0|1606008451|14.76|1606041552|645.880888888889|288|193764.266666666|86400|245.0|-171272.270757009|-84245.3229881982|73500|2109.85465123457|632956.39537037 >>>>>>>>>>>>>>> 2020-11-21 >>>>>>>>>>>>>>> 00:00:00|1605913200|0.0|1605913439|15.88|1605942546|1114.47377777778|288|334342.133333333|86400|191.0|-175428.251363656|-273150.682819638|86400|4553.4892182716|1366046.76548148 >>>>>>>>>>>>>>> 2020-11-20 >>>>>>>>>>>>>>> 00:00:00|1605826800|0.0|1605826872|9.17|1605833902|169.842222222222|288|50952.6666666667|86400|238.0|-42329.2825046772|-24698.2615292903|59400|247.763276197531|74328.9828592593 >>>>>>>>>>>>>>> 2020-11-19 >>>>>>>>>>>>>>> 00:00:00|1605740400|0.0|1605798095|22.82|1605788229|919.519666666666|288|275855.9|86400|255.0|-208559.830853793|-91789.2604135498|82800|3926.4786627037|1177943.59881111 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um >>>>>>>>>>>>>>> 17:30:54 UTC+1: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> What do you mean by, "there are no longer windDir data in >>>>>>>>>>>>>>>> the hi/lo section"? Is there a placeholder? Or, white space? >>>>>>>>>>>>>>>> Or, N/A? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> It might be worth seeing what is in your database. This >>>>>>>>>>>>>>>> assumes your database is located at /var/lib/weewx/weewx.sdb. >>>>>>>>>>>>>>>> If you used >>>>>>>>>>>>>>>> the setup.py install method, it would be at >>>>>>>>>>>>>>>> /home/weewx/archive/weewx.sdb. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> *sqlite3 /var/lib/weewx/weewx.sdb* >>>>>>>>>>>>>>>> sqlite> *select datetime(dateTime, 'unixepoch', >>>>>>>>>>>>>>>> 'localtime'), * from archive_day_wind order by dateTime desc >>>>>>>>>>>>>>>> limit 20;* >>>>>>>>>>>>>>>> sqlite> *.quit* >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Dec 8, 2020 at 8:15 AM Vetti52 <[email protected]> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Since update to version 4.2.0, I have a curious result in >>>>>>>>>>>>>>>>> season skin. Although $current.windDir is properly displayed >>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>> continuously collected, there are no longer windDir data in >>>>>>>>>>>>>>>>> the hi/lo >>>>>>>>>>>>>>>>> section. Wind Max shows speed correctly, but no direction. I >>>>>>>>>>>>>>>>> checked >>>>>>>>>>>>>>>>> hilo.inc. There are no changes, compared to the original >>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>> (hilo.inc.dpkg-dist dated from 2020-04-30). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Where should I start to trace the bug? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>> . >>>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com >>>>>>>>>>> >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/83d99b6d-863c-4424-afd6-74c119fd25f7n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/83d99b6d-863c-4424-afd6-74c119fd25f7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/b260aeab-db22-4a65-90a0-20cfa61bf408n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/b260aeab-db22-4a65-90a0-20cfa61bf408n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/f242a4ec-4759-4eb0-bb84-5374aa9530c9n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/f242a4ec-4759-4eb0-bb84-5374aa9530c9n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/60525598-e435-4c59-8e4d-f22e9cb8bc05n%40googlegroups.com.
