Tom, I was having the same issue using the gw1000 driver, I now see an entry for every archive in the database in windGustDir. I suspect this will fix the problem if any of the new entries exceed the max for the month..
I guess I could back fill the NULLs from windDir On Sunday, December 13, 2020 at 3:01:35 PM UTC-7 Vetti52 wrote: > No, unfortunately still "N/A" in all of December values. > > [email protected] schrieb am Sonntag, 13. Dezember 2020 um 22:29:07 UTC+1: > >> That last version was not an instrumented version. It was intended to fix >> the problem. Do you now see values for $month.wind.gustdir, and so on? >> >> On Sun, Dec 13, 2020 at 1:24 PM Vetti52 <[email protected]> wrote: >> >>> ok, here we are: >>> >>> >>> [email protected] schrieb am Sonntag, 13. Dezember 2020 um 19:10:51 >>> UTC+1: >>> >>>> I see the problem. It's a subtle bug. Try this version of accum.py. >>>> >>>> -tk >>>> >>>> On Sun, Dec 13, 2020 at 9:43 AM Vetti52 <[email protected]> wrote: >>>> >>>>> ok, this time, I think, I got several loop in. Sorry... >>>>> >>>>> >>>>> >>>>> [email protected] schrieb am Sonntag, 13. Dezember 2020 um 17:14:26 >>>>> UTC+1: >>>>> >>>>>> OK, looks like the gust direction is not getting added to >>>>>> the accumulators. Same drill: replace your copy of accum.py with this >>>>>> one. >>>>>> >>>>>> Make sure you let it run through the first reporting cycle. In your >>>>>> first run, you stopped it a bit too early. >>>>>> >>>>>> -tk >>>>>> >>>>>> On Sun, Dec 13, 2020 at 6:42 AM Vetti52 <[email protected]> wrote: >>>>>> >>>>>>> Just to complete the log file, I restarted again using GW1000 >>>>>>> driver, which I would like to use, as sson as the missing . Looks >>>>>>> different. >>>>>>> >>>>>>> HTH >>>>>>> >>>>>>> --ph >>>>>>> >>>>>>> Vetti52 schrieb am Sonntag, 13. Dezember 2020 um 15:27:27 UTC+1: >>>>>>> >>>>>>>> Here is the result >>>>>>>> >>>>>>>> Thanks >>>>>>>> -ph >>>>>>>> >>>>>>>> BTW, I had a look at the most recent thread, presenting a greek >>>>>>>> version ( >>>>>>>> https://groups.google.com/g/weewx-user/c/h7nEzNRpNhM/m/tCXM0sgYAgAJ). >>>>>>>> There seems to be the same problem with N/A for windGustDir. >>>>>>>> [email protected] schrieb am Samstag, 12. Dezember 2020 um 23:33:28 >>>>>>>> UTC+1: >>>>>>>> >>>>>>>>> That tells us that the driver is not emitting windGustDir, but >>>>>>>>> it's not telling us why it cannot be extracted out of the >>>>>>>>> accumulators by >>>>>>>>> WeeWX. >>>>>>>>> >>>>>>>>> Attached is an instrumented version of accum.py. Swap the version >>>>>>>>> you have with it. It should be in /usr/share/weewx/weewx/accum.py. >>>>>>>>> >>>>>>>>> Set debug=1, restart weewx, then let it run through the first >>>>>>>>> reporting cycle. Post the log. >>>>>>>>> >>>>>>>>> -tk >>>>>>>>> >>>>>>>>> On Sat, Dec 12, 2020 at 9:33 AM Vetti52 <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> Here a comparison of three outputs, first as GW1000.service , >>>>>>>>>> then as gw1000 driver and finally the current working ecowitt-client >>>>>>>>>> by the >>>>>>>>>> interceptor driver: >>>>>>>>>> >>>>>>>>>> # PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 --test-driver >>>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>>> Interrogating GW1000 at 192.168.100.150:45000 >>>>>>>>>> 2020-12-12 17:55:00 CET (1607792100): UV: 0, dateTime: >>>>>>>>>> 1607792100, dayRain: 0.0, daymaxwind: 7.7, inHumidity: 59, inTemp: >>>>>>>>>> 17.7, >>>>>>>>>> luminosity: 0.0, monthRain: 5.7, outHumidity: 93, outTemp: 2.7, >>>>>>>>>> pressure: >>>>>>>>>> 999.0, rain: None, rainRate: 0.0, relbarometer: 1003.1, stormRain: >>>>>>>>>> 0.0, >>>>>>>>>> usUnits: 17, uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: >>>>>>>>>> 70, >>>>>>>>>> windGust: 2.6, windSpeed: 1.0, yearRain: 729.9 >>>>>>>>>> >>>>>>>>>> # PYTHONPATH=/usr/share/weewx python3 -m user.gw1000 >>>>>>>>>> --test-service >>>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>>> Interrogating GW1000 at 192.168.100.150:45000 >>>>>>>>>> LOOP: 2020-12-12 17:56:02 CET (1607792162) UV: 0, dateTime: >>>>>>>>>> 1607792162, dayRain: 0.0, daymaxwind: 7.7, dummyTemp: 96.3, >>>>>>>>>> inHumidity: 59, >>>>>>>>>> inTemp: 63.86, luminosity: 0.0, monthRain: 0.22440944881889766, >>>>>>>>>> outHumidity: 94, outTemp: 36.86, pressure: 29.5004575125, rain: >>>>>>>>>> None, >>>>>>>>>> rainRate: 0.0, relbarometer: 1003.1, stormRain: 0.0, usUnits: 1, >>>>>>>>>> uvradiation: 0.1, weekRain: 3.1, wh65_batt: 0, windDir: 77, >>>>>>>>>> windGust: >>>>>>>>>> 4.473883703878609, windSpeed: 2.6843302223271652, yearRain: >>>>>>>>>> 28.736220472440944 >>>>>>>>>> LOOP: 2020-12-12 17:56:12 CET (1607792172) dateTime: >>>>>>>>>> 1607792172, dummyTemp: 96.3, usUnits: 1 >>>>>>>>>> >>>>>>>>>> # PYTHONPATH=/usr/share/weewx python3 user/interceptor.py >>>>>>>>>> --device=ecowitt-client --mode=listen --port=9000 >>>>>>>>>> mapped packet: {'dateTime': 1607792207, 'usUnits': 1, 'pressure': >>>>>>>>>> 29.492, 'barometer': 29.613, 'outHumidity': 94.0, 'inHumidity': >>>>>>>>>> 58.0, >>>>>>>>>> 'outTemp': 36.9, 'inTemp': 63.9, 'windSpeed': 2.46, 'windGust': >>>>>>>>>> 5.82, >>>>>>>>>> 'windDir': 108.0, 'radiation': 0.0, 'rain': None, 'rainRate': 0.0, >>>>>>>>>> 'rainEvent': 0.0, 'UV': 0.0, 'txBatteryStatus': 0.0} >>>>>>>>>> >>>>>>>>>> The windGustDir does not seem to be emitted. There are two other >>>>>>>>>> issues: "rainEvent" and "txBatteryStatus" are missing in the >>>>>>>>>> GW1000 data or are not mapped correctly. Thus, Weewx shows no >>>>>>>>>> results for >>>>>>>>>> Rain Event, and indicates a low transmitter battery status. I would >>>>>>>>>> like to >>>>>>>>>> move to the GW1000 driver (or better use GW1000.service?), if it >>>>>>>>>> would work >>>>>>>>>> flawlessly. But it would be nice, to know, how to proceed now. >>>>>>>>>> >>>>>>>>>> I had GW1000.service activated in parallel to the interceptor >>>>>>>>>> driver, although this is somewhat nonsense, as both data come from >>>>>>>>>> the same >>>>>>>>>> sensors, either "translated" to Ecowitt style by the GW1000, or >>>>>>>>>> pulled by >>>>>>>>>> the GW1000.service directly. This I did just for a short time to >>>>>>>>>> see, if >>>>>>>>>> there were any errors occuring. Although the raw data seem not to be >>>>>>>>>> comparable, I could not see any effect. Actually I went back to the >>>>>>>>>> interceptor driver, so at least rainEvent and the battery status are >>>>>>>>>> ok >>>>>>>>>> again. >>>>>>>>>> [email protected] schrieb am Samstag, 12. Dezember 2020 um >>>>>>>>>> 15:20:29 UTC+1: >>>>>>>>>> >>>>>>>>>>> I do not think your problem is related to the "weighting" >>>>>>>>>>> problem. It affected only the daily summaries and, even then, only >>>>>>>>>>> fields >>>>>>>>>>> that are weighted by the archive length. Wind direction is not one >>>>>>>>>>> of them. >>>>>>>>>>> >>>>>>>>>>> Unfortunately, I am not very familiar with any of the drivers >>>>>>>>>>> and services you are using. If I understand correctly, the data in >>>>>>>>>>> question >>>>>>>>>>> was collected by interceptor.py. I would assume that's where the >>>>>>>>>>> problem >>>>>>>>>>> is. Does the driver emit windGustDir on every LOOP packet? Or, does >>>>>>>>>>> it rely >>>>>>>>>>> on software record generation to provide it at the end of an >>>>>>>>>>> archive period? >>>>>>>>>>> >>>>>>>>>>> Sorry I cannot be of more help. >>>>>>>>>>> >>>>>>>>>>> -tk >>>>>>>>>>> >>>>>>>>>>> On Thu, Dec 10, 2020 at 11:29 AM Vetti52 <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> So, I am still not sure, if wee_database --update or -- >>>>>>>>>>>> reweight should solve the problem. Or do I have to wait for a >>>>>>>>>>>> special fix? >>>>>>>>>>>> >>>>>>>>>>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 21:01:56 UTC+1: >>>>>>>>>>>> >>>>>>>>>>>>> BTW, there are some values not null in the database after >>>>>>>>>>>>> update, as seen, when filtering the archive for windGustDir >>>>>>>>>>>>> <> null: >>>>>>>>>>>>> dateTime windGustDir >>>>>>>>>>>>> 2020-12-08 10:50:00 89.0 >>>>>>>>>>>>> 2020-12-08 05:35:00 95.0 >>>>>>>>>>>>> 2020-12-08 01:25:00 148.0 >>>>>>>>>>>>> 2020-12-07 22:20:00 168.0 >>>>>>>>>>>>> 2020-12-05 01:35:00 120.0 >>>>>>>>>>>>> 2020-12-04 22:00:00 101.0 >>>>>>>>>>>>> >>>>>>>>>>>>> Vetti52 schrieb am Dienstag, 8. Dezember 2020 um 19:33:13 >>>>>>>>>>>>> UTC+1: >>>>>>>>>>>>> >>>>>>>>>>>>>> tha update was on 2020-12-04, right. >>>>>>>>>>>>>> >>>>>>>>>>>>>> at 1. >>>>>>>>>>>>>> I am running Weewx on a Raspi4 under buster, installed with >>>>>>>>>>>>>> apt-get install weewx. My station is a EFWS2500, which is a >>>>>>>>>>>>>> clone of >>>>>>>>>>>>>> Ecowitt 2500. The data are collected by a Froggit DS2500, which >>>>>>>>>>>>>> is a clone >>>>>>>>>>>>>> of GW1000. Weewx still collects the data from interceptor.py >>>>>>>>>>>>>> ecowitt-client. Although user.gw1000 is already implemented as >>>>>>>>>>>>>> a service, >>>>>>>>>>>>>> I still have not yet replaced interceptor.py. >>>>>>>>>>>>>> >>>>>>>>>>>>>> at 2. >>>>>>>>>>>>>> didn't detect ignore_zero_wind in weewx.conf. >>>>>>>>>>>>>> >>>>>>>>>>>>>> at 3. >>>>>>>>>>>>>> record_generation = software >>>>>>>>>>>>>> >>>>>>>>>>>>>> HTH >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks >>>>>>>>>>>>>> -ph >>>>>>>>>>>>>> >>>>>>>>>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um >>>>>>>>>>>>>> 18:42:04 UTC+1: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I assume you updated on 2020-12-04? There is no value for >>>>>>>>>>>>>>> "max_dir" (which is where "gust_dir" comes from) in your daily >>>>>>>>>>>>>>> summaries >>>>>>>>>>>>>>> since that date. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Looking through your daily summaries, you are suffering from >>>>>>>>>>>>>>> issue #623 <https://github.com/weewx/weewx/issues/623> (as >>>>>>>>>>>>>>> are most V4.2 users). I am working on a fix for this. However, >>>>>>>>>>>>>>> as far as I >>>>>>>>>>>>>>> know, this problem should not be affecting max_dir, but I may >>>>>>>>>>>>>>> be missing >>>>>>>>>>>>>>> something. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> A few questions: >>>>>>>>>>>>>>> 1. What kind of hardware? >>>>>>>>>>>>>>> 2. What is your setting for option ignore_zero_wind, if any? >>>>>>>>>>>>>>> 3. What is your setting for option record_generation? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tue, Dec 8, 2020 at 8:44 AM Vetti52 <[email protected]> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> It says "N/A". >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The output of sqlite: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2020-12-08 >>>>>>>>>>>>>>>> 00:00:00|1607382000|0.0|1607382032|10.29|1607442892|148.553777777778|211|148.553777777778|211||141.25403836784|8.54431223906981|211|307.861736888889|307.861736888889 >>>>>>>>>>>>>>>> 2020-12-07 >>>>>>>>>>>>>>>> 00:00:00|1607295600|0.0|1607295628|18.34|1607348466|969.075666666667|288|969.075666666667|288||563.975677916051|-355.104682689556|288|4027.90666114815|4027.90666114815 >>>>>>>>>>>>>>>> 2020-12-06 >>>>>>>>>>>>>>>> 00:00:00|1607209200|0.0|1607209233|9.17|1607219761|77.5104166666667|286|77.5104166666667|286||69.480956552117|2.39263945299658|286|132.33436038966|132.33436038966 >>>>>>>>>>>>>>>> 2020-12-05 >>>>>>>>>>>>>>>> 00:00:00|1607122800|0.0|1607123329|12.53|1607140258|550.433333333334|288|550.433333333334|288||357.29020463216|-182.82480166047|288|1638.89117222222|1638.89117222222 >>>>>>>>>>>>>>>> 2020-12-04 >>>>>>>>>>>>>>>> 00:00:00|1607036400|0.0|1607039337|20.58|1607050956|806.906472222223|288|806.906472222223|288||609.110049598142|-419.170693241216|288|2757.25666137114|2757.25666137114 >>>>>>>>>>>>>>>> 2020-12-03 >>>>>>>>>>>>>>>> 00:00:00|1606950000|0.0|1606950381|14.76|1606982936|938.132555555555|286|161542.062333333|52611|136.0|63684.8752720733|-143160.707316072|52611|3367.86934245679|550406.753590012 >>>>>>>>>>>>>>>> 2020-12-02 >>>>>>>>>>>>>>>> 00:00:00|1606863600|0.0|1606863628|10.29|1606933960|298.527702380952|288|89558.3107142857|86400|97.0|42277.4937890549|-72643.1316507023|61200|647.727487337254|194318.246201176 >>>>>>>>>>>>>>>> 2020-12-01 >>>>>>>>>>>>>>>> 00:00:00|1606777200|0.0|1606778615|9.17|1606778252|265.736888888889|288|79721.0666666667|86400|194.0|42931.7123928354|-43844.9965062139|69900|434.78745508642|130436.236525926 >>>>>>>>>>>>>>>> 2020-11-30 >>>>>>>>>>>>>>>> 00:00:00|1606690800|0.0|1606690818|12.53|1606753726|458.85391053391|287|137656.173160173|86100|138.0|-43283.5066028223|-120674.014788181|77100|1142.32670378797|342698.01113639 >>>>>>>>>>>>>>>> 2020-11-29 >>>>>>>>>>>>>>>> 00:00:00|1606604400|0.0|1606604418|5.82|1606650983|50.8892222222223|288|15266.7666666667|86400|309.0|-11596.0986434007|7995.68851878374|24600|54.2518490740741|16275.5547222222 >>>>>>>>>>>>>>>> 2020-11-28 >>>>>>>>>>>>>>>> 00:00:00|1606518000|0.0|1606518015|11.41|1606565426|165.474444444445|287|49642.3333333333|86100|63.0|47302.3988525243|1887.80479760903|28200|423.739858888889|127121.957666667 >>>>>>>>>>>>>>>> 2020-11-27 >>>>>>>>>>>>>>>> 00:00:00|1606431600|0.0|1606431616|4.47|1606483066|9.17855555555556|288|2753.56666666667|86400|131.0|2261.0873478704|-539.506810163124|4200|10.6575301851852|3197.25905555556 >>>>>>>>>>>>>>>> 2020-11-26 >>>>>>>>>>>>>>>> 00:00:00|1606345200|0.0|1606345204|8.05|1606394153|107.788222222222|287|32336.4666666667|86100|259.0|-25803.5675497035|-15488.3625339286|42000|134.601425382716|40380.4276148148 >>>>>>>>>>>>>>>> 2020-11-25 >>>>>>>>>>>>>>>> 00:00:00|1606258800|0.0|1606258804|9.17|1606302300|337.383111111111|288|101214.933333333|86400|189.0|-19895.5174799498|-97556.2211722166|76500|636.16824345679|190850.473037037 >>>>>>>>>>>>>>>> 2020-11-24 >>>>>>>>>>>>>>>> 00:00:00|1606172400|0.0|1606172999|10.29|1606187816|577.891555555556|288|173367.466666667|86400|213.0|-90246.0852000086|-146738.507905923|86400|1319.29265822222|395787.797466666 >>>>>>>>>>>>>>>> 2020-11-23 >>>>>>>>>>>>>>>> 00:00:00|1606086000|0.0|1606086005|10.29|1606137950|368.728555555556|288|110618.566666667|86400|261.0|-97191.5602413715|-50554.3362971601|72300|718.446958555555|215534.087566667 >>>>>>>>>>>>>>>> 2020-11-22 >>>>>>>>>>>>>>>> 00:00:00|1605999600|0.0|1606008451|14.76|1606041552|645.880888888889|288|193764.266666666|86400|245.0|-171272.270757009|-84245.3229881982|73500|2109.85465123457|632956.39537037 >>>>>>>>>>>>>>>> 2020-11-21 >>>>>>>>>>>>>>>> 00:00:00|1605913200|0.0|1605913439|15.88|1605942546|1114.47377777778|288|334342.133333333|86400|191.0|-175428.251363656|-273150.682819638|86400|4553.4892182716|1366046.76548148 >>>>>>>>>>>>>>>> 2020-11-20 >>>>>>>>>>>>>>>> 00:00:00|1605826800|0.0|1605826872|9.17|1605833902|169.842222222222|288|50952.6666666667|86400|238.0|-42329.2825046772|-24698.2615292903|59400|247.763276197531|74328.9828592593 >>>>>>>>>>>>>>>> 2020-11-19 >>>>>>>>>>>>>>>> 00:00:00|1605740400|0.0|1605798095|22.82|1605788229|919.519666666666|288|275855.9|86400|255.0|-208559.830853793|-91789.2604135498|82800|3926.4786627037|1177943.59881111 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> [email protected] schrieb am Dienstag, 8. Dezember 2020 um >>>>>>>>>>>>>>>> 17:30:54 UTC+1: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> What do you mean by, "there are no longer windDir data in >>>>>>>>>>>>>>>>> the hi/lo section"? Is there a placeholder? Or, white space? >>>>>>>>>>>>>>>>> Or, N/A? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> It might be worth seeing what is in your database. This >>>>>>>>>>>>>>>>> assumes your database is located at /var/lib/weewx/weewx.sdb. >>>>>>>>>>>>>>>>> If you used >>>>>>>>>>>>>>>>> the setup.py install method, it would be at >>>>>>>>>>>>>>>>> /home/weewx/archive/weewx.sdb. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *sqlite3 /var/lib/weewx/weewx.sdb* >>>>>>>>>>>>>>>>> sqlite> *select datetime(dateTime, 'unixepoch', >>>>>>>>>>>>>>>>> 'localtime'), * from archive_day_wind order by dateTime desc >>>>>>>>>>>>>>>>> limit 20;* >>>>>>>>>>>>>>>>> sqlite> *.quit* >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tue, Dec 8, 2020 at 8:15 AM Vetti52 <[email protected]> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Since update to version 4.2.0, I have a curious result in >>>>>>>>>>>>>>>>>> season skin. Although $current.windDir is properly displayed >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> continuously collected, there are no longer windDir data in >>>>>>>>>>>>>>>>>> the hi/lo >>>>>>>>>>>>>>>>>> section. Wind Max shows speed correctly, but no direction. I >>>>>>>>>>>>>>>>>> checked >>>>>>>>>>>>>>>>>> hilo.inc. There are no changes, compared to the original >>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>> (hilo.inc.dpkg-dist dated from 2020-04-30). >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Where should I start to trace the bug? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to [email protected] >>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/bb0a2343-45cf-4885-a7a8-4212c4426592n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/38c3e7ba-b73d-4291-a17f-0620c9f80ac7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/625e77f0-c4f3-4640-aecf-1128cb2af4abn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/220a3041-b2a2-4b37-a6c2-3c158b60e20bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/83d99b6d-863c-4424-afd6-74c119fd25f7n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/83d99b6d-863c-4424-afd6-74c119fd25f7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/b260aeab-db22-4a65-90a0-20cfa61bf408n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/b260aeab-db22-4a65-90a0-20cfa61bf408n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/f242a4ec-4759-4eb0-bb84-5374aa9530c9n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/f242a4ec-4759-4eb0-bb84-5374aa9530c9n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9ea1b485-057d-45c7-9158-d6b03a714b39n%40googlegroups.com.
