Which device provides the IP addresses? Or are they manually set? Do you use UPv4 or IPv6?
The router may revoke the IP address leases if Internet is down. That is especially possible if you use IPv6. Artvd schrieb am Montag, 15. März 2021 um 15:46:38 UTC+1: > The WLL and a RPI Weewx computer are on the same switch which goes to the > internet router > > Op maandag 15 maart 2021 om 15:25:24 UTC+1 schreef [email protected]: > >> So that sounds like a network issue. Could you provide a layout of your >> network including WLL, the WeeWX computer, the Internet router, and may be >> the switch? >> >> Artvd schrieb am Montag, 15. März 2021 um 15:01:24 UTC+1: >> >>> I thought so too but i don't get that working. >>> By the way I also don't want the incur additional cost on top of the >>> purchase price for the equipment. >>> >>> Op maandag 15 maart 2021 om 14:55:38 UTC+1 schreef [email protected]: >>> >>>> I had a discussion with Davis when I bought the device, and they stated >>>> that they require to use it with their cloud. The target is to get you >>>> into >>>> their subscription plans. And if you do so you can download all the data >>>> stored within the device. And if you don't do so (like me) ... they don't >>>> like it. >>>> >>>> So you have to ensure that the WLL device can always send its data to >>>> WeeWX, even if the internet is down. WeeWX saves the data and can display >>>> it on the skin afterwards. No problem if the internet is down for some >>>> time. >>>> >>>> Artvd schrieb am Montag, 15. März 2021 um 14:27:08 UTC+1: >>>> >>>>> >>>>> Hello >>>>> >>>>> I work with Vantage Vue and WeatherlinkLive (WLL) using weewx with >>>>> weatherlinliveupd driver to upload data to my weather website withe >>>>> Neoground skin. >>>>> >>>>> I have daily interruptions in my internet connection. This cause holes >>>>> in the reports on the website. I believe data is stored in the WLL. Does >>>>> somebody have a solution for this? Perhpaps there is a setting to change. >>>>> I >>>>> also thought of perhaps use wunderfixer to complete the missing data to >>>>> WU >>>>> and then reimporting the full data from WU to my website? >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0a034ccd-f149-4fda-b282-63f778eb2310n%40googlegroups.com.
