As requested, a leaner realisation. In attached file the results of 2 sequences executed: - in both cases 'clean restart' of the raspberry to ensure that no unintended process running, followed by 1 direct switch-on of weewx - the sequences differ in the way going to logging, as described in the file - in sequence1 apparently oneshot run before weewx stops. Exit of logging is by keyboard break. - in sequence2 stream of repeating logging info. Also terminated the logging by keyboard break.
Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef [email protected]: > You have many instances of weewxd all running simultaneously. Kill them > all, then start one. > > On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <[email protected]> wrote: > >> As requested. >> >> Scanning the logging see repeated reporting of loading of StdReport, but >> no text clearly pointing to errors in execution of StandardReport, nor any >> results. >> But as explained in the first message of this thread, have 'limited' >> experience with weewx ... >> >> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >> >>> The config files and template tell us what should be happening but the >>> log will tell us what is actually happening. Have you looked in the log? >>> Are there any errors? You already have debug = 1 in weewx.conf so you >>> should be able to work out from the log what is being generated and what is >>> not. Post at least 10 minutes of log here and we can see what is going on. >>> >>> Gary >>> On Friday, 30 April 2021 at 19:00:29 UTC+10 [email protected] wrote: >>> >>>> Tom, >>>> Puzzled/baffled, because following the hints from you and taking into >>>> account also the hints from the much earlier discussion between you and >>>> Franklin Bockstael, but still no file openweerdata.htm appearing in folder >>>> /home/weewx/public_html. >>>> >>>> Have attached the (probably) relevant setup-files: >>>> - weewx.conf which in folder /home/weewx enables Standard-skin and sets >>>> the related HTML_Root to /home/weewx/public_html >>>> (*on purpose*, to get a different output from 'basic' etc.) >>>> - skin.conf which in folder /home/weewx/skins/Standard in the >>>> [ToDate]-segment at the first lines enables/sets the template for owd (and >>>> disables the 'later', other templates) >>>> - the template openweerdata.htm.tmpl as located in >>>> /home/weewx/skins/Standard >>>> >>>> The adapted conf-files seem OK, but now the nagging feeling that the >>>> template has an inhibiting error. >>>> But that is contradicted by the fact that Franklin Bockstael has it in >>>> operation since long time without problems. >>>> >>>> During testing not running WeeWx as daemon, but 'discrete start' by >>>> command ./bin/weexd >>>> >>>> Do you see a solution? >>>> >>>> >>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef [email protected]: >>>> >>>>> I should add that the template must also be listed in the >>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>> >>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer <[email protected]> wrote: >>>>> >>>>>> Yes, the skin has to be enabled for any of the templates in the >>>>>> skin's folder to be processed. So, if you put your "HWA" template in >>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>> >>>>>> Or, you can put HWA in your "./basic" folder, then enable your basic >>>>>> report. >>>>>> >>>>>> Either way will work. >>>>>> >>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN <[email protected]> wrote: >>>>>> >>>>>>> *Brainwave?* >>>>>>> Aiming at a first, basic realisation the folder >>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, the template >>>>>>> for >>>>>>> generation of the HWA-file was put in that folder. >>>>>>> Considering similarity with generation of other html-files the call >>>>>>> to the HWA-template was put in skin.conf in same folder >>>>>>> /home/weewx/skins/Standard >>>>>>> >>>>>>> Looking in /home/weewx at the below setting in weewx.conf, starting >>>>>>> to doubt that such choice is correct. >>>>>>> >>>>>>> [[StandardReport]] >>>>>>> # This is the old "Standard" skin. By default, it is not >>>>>>> enabled. >>>>>>> skin = Standard >>>>>>> enable = false >>>>>>> [[basic]] >>>>>>> skin = basic >>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>> [[[Extras]]] >>>>>>> current = INST_SKIN_ROOT/basic/current.inc >>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>> >>>>>>> If enable=false, *it looks as if* 'Standard'will not be called and >>>>>>> (as consequence no call to the HWA-template at it's present location). >>>>>>> But if that assumption is correct, where should I alternatively put >>>>>>> the template and call to the HWA-template to stay in line with 'normal >>>>>>> practise'? >>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton vanN: >>>>>>> >>>>>>>> As requested, attached is the repeating segment of the syslog with >>>>>>>> debug=1 >>>>>>>> >>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef [email protected] >>>>>>>> : >>>>>>>> >>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>> >>>>>>>>> Stop weewx >>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>> Restart weewx >>>>>>>>> Post the log from startup. >>>>>>>>> >>>>>>>>> -tk >>>>>>>>> >>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> Related syslog-segment from RPI_CLI obtained with PuttySSH >>>>>>>>>> >>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef Ton vanN: >>>>>>>>>> >>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>> Have the main progam as simulator up and running (= see files >>>>>>>>>>> updating in folder public_html ). >>>>>>>>>>> Now trying to implement a template to generate an uploadfile for >>>>>>>>>>> HetWeerActueel. >>>>>>>>>>> [has been discussed earlier in this forum, but that discussion >>>>>>>>>>> apparently not ending with working solution] >>>>>>>>>>> >>>>>>>>>>> Template [attached in zip-file] should generate a htm-file. >>>>>>>>>>> For activation of the template I inserted the following text in >>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of the section >>>>>>>>>>> CheetahGenerator >>>>>>>>>>> >>>>>>>>>>> [[HWA]] >>>>>>>>>>> # Report that generates an uploadfile for HetWeerActueel. >>>>>>>>>>> [[[OWD]]] >>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>> >>>>>>>>>>> Would expect the generated htm-file to appear in folder >>>>>>>>>>> public_html >>>>>>>>>>> When running WeeWX no errors (which is OK), but also nowhere the >>>>>>>>>>> expected htm-file: >>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com.
SysLog20210501.rar
Description: application/rar
