Tom, ;-) That was a really good advice! Turned to running WeeWX as daemon, started the logging and got a different read-out which now includes a reference to the HWA-template. That confirms my 'nagging feeling' that something is not OK with the handling of that HWA-template: see time-segment 08:21:59 Next step is finding a soulution .....
Op zaterdag 1 mei 2021 om 20:02:10 UTC+2 schreef [email protected]: > This is most likely being caused by the terminal session detaching from > the process. This can happen when you ssh into a computer, start a process, > then exit the ssh session. > > Either run weewxd as a daemon, or keep the terminal window open. > > That's the best I can come up with. > > > > On Sat, May 1, 2021 at 4:24 AM Anton vanNwnhzn@GMail <[email protected]> > wrote: > >> Addition to description of *Sequence1*. >> >> Once weewx has been started, at Putty's CLI appears the expected stream >> of print-out. >> At the keyboard break that stream ends with an error report. >> Perhaps that error report also provides some relevant info? >> See below the last printout from the loop and the error report mentioned >> above. >> >> LOOP: 2021-05-01 13:17:59 CEST (1619867879) altimeter: >> 31.165113295698216, appTemp: 28.451970776082117, barometer: >> 31.09999991633433, cloudbase: 1300.0558352360692, consBatteryVoltage: >> 12.743352544782736, dateTime: 1619867879, dewpoint: 27.19647824994742, >> heatindex: 32.6713164908827, heatingVoltage: 11.71583632592742, humidex: >> 32.6713164908827, inDewpoint: 31.079532540856405, inHumidity: >> 29.99999665337326, inTemp: 63.00000167331337, inTempBatteryStatus: 0, >> maxSolarRad: 812.0133117257177, outHumidity: 79.99999749002984, outTemp: >> 32.6713164908827, outTempBatteryStatus: 0, pressure: 31.09999991633433, >> radiation: 888.7102401456455, rain: 0, rainBatteryStatus: 0, rainRate: 0.0, >> referenceVoltage: 12.0, rxCheckPercent: 45.10949739082836, supplyVoltage: >> 12.0, txBatteryStatus: 0, usUnits: 1, UV: 12.441943362039037, >> windBatteryStatus: 0, windchill: 32.6713164908827, windDir: >> 359.99998494017905, windGust: 5.019940321204786e-07, windGustDir: >> 359.99998494017905, windSpeed: 4.1832835950827985e-07 >> ^CTraceback (most recent call last): >> File "./bin/weewxd", line 264, in <module> >> main() >> File "./bin/weewxd", line 157, in main >> engine.run() >> File "/home/weewx/bin/weewx/engine.py", line 208, in run >> for packet in self.console.genLoopPackets(): >> File "/home/weewx/bin/weewx/drivers/simulator.py", line 162, in >> genLoopPackets >> time.sleep(sleep_time) >> KeyboardInterrupt >> pi@Raspberry8:/home/weewx $ >> Op 1-5-2021 om 12:28 schreef Ton vanN: >> >> As requested, a leaner realisation. >> In attached file the results of 2 sequences executed: >> - in both cases 'clean restart' of the raspberry to ensure that no >> unintended process running, followed by 1 direct switch-on of weewx >> - the sequences differ in the way going to logging, as described in the >> file >> - in sequence1 apparently oneshot run before weewx stops. Exit of logging >> is by keyboard break. >> - in sequence2 stream of repeating logging info. Also terminated the >> logging by keyboard break. >> >> Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef [email protected]: >> >>> You have many instances of weewxd all running simultaneously. Kill them >>> all, then start one. >>> >>> On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <[email protected]> wrote: >>> >>>> As requested. >>>> >>>> Scanning the logging see repeated reporting of loading of StdReport, >>>> but no text clearly pointing to errors in execution of StandardReport, nor >>>> any results. >>>> But as explained in the first message of this thread, have 'limited' >>>> experience with weewx ... >>>> >>>> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >>>> >>>>> The config files and template tell us what should be happening but the >>>>> log will tell us what is actually happening. Have you looked in the log? >>>>> Are there any errors? You already have debug = 1 in weewx.conf so you >>>>> should be able to work out from the log what is being generated and what >>>>> is >>>>> not. Post at least 10 minutes of log here and we can see what is going >>>>> on. >>>>> >>>>> Gary >>>>> On Friday, 30 April 2021 at 19:00:29 UTC+10 [email protected] wrote: >>>>> >>>>>> Tom, >>>>>> Puzzled/baffled, because following the hints from you and taking into >>>>>> account also the hints from the much earlier discussion between you and >>>>>> Franklin Bockstael, but still no file openweerdata.htm appearing in >>>>>> folder >>>>>> /home/weewx/public_html. >>>>>> >>>>>> Have attached the (probably) relevant setup-files: >>>>>> - weewx.conf which in folder /home/weewx enables Standard-skin and >>>>>> sets the related HTML_Root to /home/weewx/public_html >>>>>> (*on purpose*, to get a different output from 'basic' etc.) >>>>>> - skin.conf which in folder /home/weewx/skins/Standard in the >>>>>> [ToDate]-segment at the first lines enables/sets the template for owd >>>>>> (and >>>>>> disables the 'later', other templates) >>>>>> - the template openweerdata.htm.tmpl as located in >>>>>> /home/weewx/skins/Standard >>>>>> >>>>>> The adapted conf-files seem OK, but now the nagging feeling that the >>>>>> template has an inhibiting error. >>>>>> But that is contradicted by the fact that Franklin Bockstael has it >>>>>> in operation since long time without problems. >>>>>> >>>>>> During testing not running WeeWx as daemon, but 'discrete start' by >>>>>> command ./bin/weexd >>>>>> >>>>>> Do you see a solution? >>>>>> >>>>>> >>>>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef [email protected]: >>>>>> >>>>>>> I should add that the template must also be listed in the >>>>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>>>> >>>>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer <[email protected]> wrote: >>>>>>> >>>>>>>> Yes, the skin has to be enabled for any of the templates in the >>>>>>>> skin's folder to be processed. So, if you put your "HWA" template in >>>>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>>>> >>>>>>>> Or, you can put HWA in your "./basic" folder, then enable your >>>>>>>> basic report. >>>>>>>> >>>>>>>> Either way will work. >>>>>>>> >>>>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN <[email protected]> wrote: >>>>>>>> >>>>>>>>> *Brainwave?* >>>>>>>>> Aiming at a first, basic realisation the folder >>>>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, the template >>>>>>>>> for >>>>>>>>> generation of the HWA-file was put in that folder. >>>>>>>>> Considering similarity with generation of other html-files the >>>>>>>>> call to the HWA-template was put in skin.conf in same folder >>>>>>>>> /home/weewx/skins/Standard >>>>>>>>> >>>>>>>>> Looking in /home/weewx at the below setting in weewx.conf, >>>>>>>>> starting to doubt that such choice is correct. >>>>>>>>> >>>>>>>>> [[StandardReport]] >>>>>>>>> # This is the old "Standard" skin. By default, it is >>>>>>>>> not enabled. >>>>>>>>> skin = Standard >>>>>>>>> enable = false >>>>>>>>> [[basic]] >>>>>>>>> skin = basic >>>>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>>>> [[[Extras]]] >>>>>>>>> current = INST_SKIN_ROOT/basic/current.inc >>>>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>>>> >>>>>>>>> If enable=false, *it looks as if* 'Standard'will not be called >>>>>>>>> and (as consequence no call to the HWA-template at it's present >>>>>>>>> location). >>>>>>>>> But if that assumption is correct, where should I alternatively >>>>>>>>> put the template and call to the HWA-template to stay in line with >>>>>>>>> 'normal >>>>>>>>> practise'? >>>>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton vanN: >>>>>>>>> >>>>>>>>>> As requested, attached is the repeating segment of the syslog >>>>>>>>>> with debug=1 >>>>>>>>>> >>>>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef >>>>>>>>>> [email protected]: >>>>>>>>>> >>>>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>>>> >>>>>>>>>>> Stop weewx >>>>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>>>> Restart weewx >>>>>>>>>>> Post the log from startup. >>>>>>>>>>> >>>>>>>>>>> -tk >>>>>>>>>>> >>>>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Related syslog-segment from RPI_CLI obtained with PuttySSH >>>>>>>>>>>> >>>>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef Ton vanN: >>>>>>>>>>>> >>>>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>>>> Have the main progam as simulator up and running (= see files >>>>>>>>>>>>> updating in folder public_html ). >>>>>>>>>>>>> Now trying to implement a template to generate an uploadfile >>>>>>>>>>>>> for HetWeerActueel. >>>>>>>>>>>>> [has been discussed earlier in this forum, but that discussion >>>>>>>>>>>>> apparently not ending with working solution] >>>>>>>>>>>>> >>>>>>>>>>>>> Template [attached in zip-file] should generate a htm-file. >>>>>>>>>>>>> For activation of the template I inserted the following text >>>>>>>>>>>>> in >>>>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of the section >>>>>>>>>>>>> CheetahGenerator >>>>>>>>>>>>> >>>>>>>>>>>>> [[HWA]] >>>>>>>>>>>>> # Report that generates an uploadfile for >>>>>>>>>>>>> HetWeerActueel. >>>>>>>>>>>>> [[[OWD]]] >>>>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>>>> >>>>>>>>>>>>> Would expect the generated htm-file to appear in folder >>>>>>>>>>>>> public_html >>>>>>>>>>>>> When running WeeWX no errors (which is OK), but also nowhere >>>>>>>>>>>>> the expected htm-file: >>>>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/_KTQ9XcGIRo/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> >> =============================================================== >> Contactinfo voor Anton van Nieuwenhuijzen: >> Email = [email protected] >> Fax2Mail = (+31/0)84.8397303 <+31%2084%20839%207303> [ook Voice2Mail] >> =============================================================== >> Deze E-mail en eventuele aanhangende files zijn >> alleen bestemd voor de geadresseerde(n). >> Als je deze E-mail ten onrechte hebt ontvangen, >> dan aub verwijderen en de afzender informeren. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com >> >> <https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7ec4b4e9-436f-493f-b0c4-44295a0fcbecn%40googlegroups.com.
SysLog20210502.rar
Description: application/rar
