This is most likely being caused by the terminal session detaching from the process. This can happen when you ssh into a computer, start a process, then exit the ssh session.
Either run weewxd as a daemon, or keep the terminal window open. That's the best I can come up with. On Sat, May 1, 2021 at 4:24 AM Anton vanNwnhzn@GMail <[email protected]> wrote: > Addition to description of *Sequence1*. > > Once weewx has been started, at Putty's CLI appears the expected stream of > print-out. > At the keyboard break that stream ends with an error report. > Perhaps that error report also provides some relevant info? > See below the last printout from the loop and the error report mentioned > above. > > LOOP: 2021-05-01 13:17:59 CEST (1619867879) altimeter: > 31.165113295698216, appTemp: 28.451970776082117, barometer: > 31.09999991633433, cloudbase: 1300.0558352360692, consBatteryVoltage: > 12.743352544782736, dateTime: 1619867879, dewpoint: 27.19647824994742, > heatindex: 32.6713164908827, heatingVoltage: 11.71583632592742, humidex: > 32.6713164908827, inDewpoint: 31.079532540856405, inHumidity: > 29.99999665337326, inTemp: 63.00000167331337, inTempBatteryStatus: 0, > maxSolarRad: 812.0133117257177, outHumidity: 79.99999749002984, outTemp: > 32.6713164908827, outTempBatteryStatus: 0, pressure: 31.09999991633433, > radiation: 888.7102401456455, rain: 0, rainBatteryStatus: 0, rainRate: 0.0, > referenceVoltage: 12.0, rxCheckPercent: 45.10949739082836, supplyVoltage: > 12.0, txBatteryStatus: 0, usUnits: 1, UV: 12.441943362039037, > windBatteryStatus: 0, windchill: 32.6713164908827, windDir: > 359.99998494017905, windGust: 5.019940321204786e-07, windGustDir: > 359.99998494017905, windSpeed: 4.1832835950827985e-07 > ^CTraceback (most recent call last): > File "./bin/weewxd", line 264, in <module> > main() > File "./bin/weewxd", line 157, in main > engine.run() > File "/home/weewx/bin/weewx/engine.py", line 208, in run > for packet in self.console.genLoopPackets(): > File "/home/weewx/bin/weewx/drivers/simulator.py", line 162, in > genLoopPackets > time.sleep(sleep_time) > KeyboardInterrupt > pi@Raspberry8:/home/weewx $ > Op 1-5-2021 om 12:28 schreef Ton vanN: > > As requested, a leaner realisation. > In attached file the results of 2 sequences executed: > - in both cases 'clean restart' of the raspberry to ensure that no > unintended process running, followed by 1 direct switch-on of weewx > - the sequences differ in the way going to logging, as described in the > file > - in sequence1 apparently oneshot run before weewx stops. Exit of logging > is by keyboard break. > - in sequence2 stream of repeating logging info. Also terminated the > logging by keyboard break. > > Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef [email protected]: > >> You have many instances of weewxd all running simultaneously. Kill them >> all, then start one. >> >> On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <[email protected]> wrote: >> >>> As requested. >>> >>> Scanning the logging see repeated reporting of loading of StdReport, but >>> no text clearly pointing to errors in execution of StandardReport, nor any >>> results. >>> But as explained in the first message of this thread, have 'limited' >>> experience with weewx ... >>> >>> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >>> >>>> The config files and template tell us what should be happening but the >>>> log will tell us what is actually happening. Have you looked in the log? >>>> Are there any errors? You already have debug = 1 in weewx.conf so you >>>> should be able to work out from the log what is being generated and what is >>>> not. Post at least 10 minutes of log here and we can see what is going on. >>>> >>>> Gary >>>> On Friday, 30 April 2021 at 19:00:29 UTC+10 [email protected] wrote: >>>> >>>>> Tom, >>>>> Puzzled/baffled, because following the hints from you and taking into >>>>> account also the hints from the much earlier discussion between you and >>>>> Franklin Bockstael, but still no file openweerdata.htm appearing in folder >>>>> /home/weewx/public_html. >>>>> >>>>> Have attached the (probably) relevant setup-files: >>>>> - weewx.conf which in folder /home/weewx enables Standard-skin and >>>>> sets the related HTML_Root to /home/weewx/public_html >>>>> (*on purpose*, to get a different output from 'basic' etc.) >>>>> - skin.conf which in folder /home/weewx/skins/Standard in the >>>>> [ToDate]-segment at the first lines enables/sets the template for owd (and >>>>> disables the 'later', other templates) >>>>> - the template openweerdata.htm.tmpl as located in >>>>> /home/weewx/skins/Standard >>>>> >>>>> The adapted conf-files seem OK, but now the nagging feeling that the >>>>> template has an inhibiting error. >>>>> But that is contradicted by the fact that Franklin Bockstael has it in >>>>> operation since long time without problems. >>>>> >>>>> During testing not running WeeWx as daemon, but 'discrete start' by >>>>> command ./bin/weexd >>>>> >>>>> Do you see a solution? >>>>> >>>>> >>>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef [email protected]: >>>>> >>>>>> I should add that the template must also be listed in the >>>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>>> >>>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer <[email protected]> wrote: >>>>>> >>>>>>> Yes, the skin has to be enabled for any of the templates in the >>>>>>> skin's folder to be processed. So, if you put your "HWA" template in >>>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>>> >>>>>>> Or, you can put HWA in your "./basic" folder, then enable your basic >>>>>>> report. >>>>>>> >>>>>>> Either way will work. >>>>>>> >>>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN <[email protected]> wrote: >>>>>>> >>>>>>>> *Brainwave?* >>>>>>>> Aiming at a first, basic realisation the folder >>>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, the template >>>>>>>> for >>>>>>>> generation of the HWA-file was put in that folder. >>>>>>>> Considering similarity with generation of other html-files the call >>>>>>>> to the HWA-template was put in skin.conf in same folder >>>>>>>> /home/weewx/skins/Standard >>>>>>>> >>>>>>>> Looking in /home/weewx at the below setting in weewx.conf, starting >>>>>>>> to doubt that such choice is correct. >>>>>>>> >>>>>>>> [[StandardReport]] >>>>>>>> # This is the old "Standard" skin. By default, it is >>>>>>>> not enabled. >>>>>>>> skin = Standard >>>>>>>> enable = false >>>>>>>> [[basic]] >>>>>>>> skin = basic >>>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>>> [[[Extras]]] >>>>>>>> current = INST_SKIN_ROOT/basic/current.inc >>>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>>> >>>>>>>> If enable=false, *it looks as if* 'Standard'will not be called >>>>>>>> and (as consequence no call to the HWA-template at it's present >>>>>>>> location). >>>>>>>> But if that assumption is correct, where should I alternatively put >>>>>>>> the template and call to the HWA-template to stay in line with 'normal >>>>>>>> practise'? >>>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton vanN: >>>>>>>> >>>>>>>>> As requested, attached is the repeating segment of the syslog with >>>>>>>>> debug=1 >>>>>>>>> >>>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef >>>>>>>>> [email protected]: >>>>>>>>> >>>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>>> >>>>>>>>>> Stop weewx >>>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>>> Restart weewx >>>>>>>>>> Post the log from startup. >>>>>>>>>> >>>>>>>>>> -tk >>>>>>>>>> >>>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Related syslog-segment from RPI_CLI obtained with PuttySSH >>>>>>>>>>> >>>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef Ton vanN: >>>>>>>>>>> >>>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>>> Have the main progam as simulator up and running (= see files >>>>>>>>>>>> updating in folder public_html ). >>>>>>>>>>>> Now trying to implement a template to generate an uploadfile >>>>>>>>>>>> for HetWeerActueel. >>>>>>>>>>>> [has been discussed earlier in this forum, but that discussion >>>>>>>>>>>> apparently not ending with working solution] >>>>>>>>>>>> >>>>>>>>>>>> Template [attached in zip-file] should generate a htm-file. >>>>>>>>>>>> For activation of the template I inserted the following text in >>>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of the section >>>>>>>>>>>> CheetahGenerator >>>>>>>>>>>> >>>>>>>>>>>> [[HWA]] >>>>>>>>>>>> # Report that generates an uploadfile for >>>>>>>>>>>> HetWeerActueel. >>>>>>>>>>>> [[[OWD]]] >>>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>>> >>>>>>>>>>>> Would expect the generated htm-file to appear in folder >>>>>>>>>>>> public_html >>>>>>>>>>>> When running WeeWX no errors (which is OK), but also nowhere >>>>>>>>>>>> the expected htm-file: >>>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/_KTQ9XcGIRo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > > =============================================================== > Contactinfo voor Anton van Nieuwenhuijzen: > Email = [email protected] > Fax2Mail = (+31/0)84.8397303 [ook Voice2Mail] > =============================================================== > Deze E-mail en eventuele aanhangende files zijn > alleen bestemd voor de geadresseerde(n). > Als je deze E-mail ten onrechte hebt ontvangen, > dan aub verwijderen en de afzender informeren. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com > <https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEAoo_2kQB%3D4PF9fAdmKK2g8hy4TOKOHhr_OZNaMjqRMQA%40mail.gmail.com.
