I have manage to get a weather station to be the main provider of data to R-Pi based Weewx installation with add on data into the database coming from a sensor providing MQTT messages. If that it is similar to what you are aiming for, maybe this conversation can provide guidance https://github.com/bellrichm/WeeWX-MQTTSubscribe/discussions/132
On Tuesday, May 4, 2021 at 7:24:13 PM UTC+2 [email protected] wrote: > > DId you read > > https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Configuring > > No, I wanted to make sure MQTT was usable simultaneously with another > weewx "driver", before I spent a lot of time on it. > > Thanks for the pointer to service vs. driver configuration! > I'll read through it. > On Tuesday, May 4, 2021 at 11:33:07 AM UTC-5 Greg Troxel wrote: > >> >> Eric Koester <[email protected]> writes: >> >> > Thanks for the pointer, Peter. >> > I looked through the install instructions and I don't see any mention >> of >> > the weewx.conf file. >> >> DId you read >> >> https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Configuring >> >> Agreed that it doesn't say that it is talking about the config file. >> >> A big point is driver vs service. It seems clear that you want >> service, where MQTT input is secondary. >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/11b9113d-aaa7-46a1-9489-c15efceea72fn%40googlegroups.com.
