That does sound similar. Thank you for that pointer! I want to get the Tasmota firmware to output MQTT messags containing the barometric pressure. Then, weewx would need to take in that MQTT message and assign the data to the stock 'barometer' variable from the database schema.
On Tuesday, May 4, 2021 at 2:02:41 PM UTC-5 [email protected] wrote: > I have manage to get a weather station to be the main provider of data to > R-Pi based Weewx installation with add on data into the database coming > from a sensor providing MQTT messages. If that it is similar to what you > are aiming for, maybe this conversation can provide guidance > https://github.com/bellrichm/WeeWX-MQTTSubscribe/discussions/132 > > On Tuesday, May 4, 2021 at 7:24:13 PM UTC+2 [email protected] wrote: > >> > DId you read >> > https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Configuring >> >> No, I wanted to make sure MQTT was usable simultaneously with another >> weewx "driver", before I spent a lot of time on it. >> >> Thanks for the pointer to service vs. driver configuration! >> I'll read through it. >> On Tuesday, May 4, 2021 at 11:33:07 AM UTC-5 Greg Troxel wrote: >> >>> >>> Eric Koester <[email protected]> writes: >>> >>> > Thanks for the pointer, Peter. >>> > I looked through the install instructions and I don't see any mention >>> of >>> > the weewx.conf file. >>> >>> DId you read >>> >>> https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Configuring >>> >>> Agreed that it doesn't say that it is talking about the config file. >>> >>> A big point is driver vs service. It seems clear that you want >>> service, where MQTT input is secondary. >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/03662dff-ffb3-439a-af42-c748cee4f29fn%40googlegroups.com.
