In general you want to look in the .tmpl template files for the skin(s) that you have enabled and simply comment out the block of code for each thing you do not have and it will take effect the next time the pages are generated (usually 5 minutes). That'll make anything extra go away pretty quickly.
A quick glance at the code seems to say the WH0290 is not yet supported by the GW1000 driver but Gary will undoubtedly chime in and walk you through how to figure out what the driver can currently see. It's possible it's a quick thing to add in hopefully. You could try a quick test using the commands in item 5 in https://github.com/gjr80/weewx-gw1000 to see if the driver sees anything currently or not. To add the air quality you'd need to map those measurements in your weewx.conf or skin.conf and 'add' something to the .tmpl template(s) you want them displayed on. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3bea397a-1218-4170-8cff-9d5143345d81n%40googlegroups.com.
