Thanks for the detailed tip. I was able to get the chart added and even figured out how to add the current pm2.5 readings to the page.
On Wednesday, August 4, 2021 at 3:41:02 PM UTC-7 [email protected] wrote: > On 03.08.2021 22:57, Clifford Snow wrote: > Hi Clifford, see below inline > > I have weewx working. I can see reports for all my devices except for the > EcoWitt WH0290 air quality monitor. Plus I'm getting empty reports on > devices I don't have such as wind speed, direction and rain measurements. > > First how do I remove the charts for devices I currently don't have. (At > some point in the future when the budget allows, I'll be purchasing more > devices.) > > Assuming you are using the Seasons skin, the pictures are defined in > skin.conf (where you can comment out the ones you don't want) and the > display of the picture on the skin (WebUI) is defined in index.html.tmpl - > here, too, you can comment out the lines for the display you don't want > (both files in the /etc/weewx/skins/Seasons directory - if you installed > weewx with the setup.py method, the path will be different - see weewx > documentation) > > > Second, I have the EcoWitt WH0290 air quality device configured on my > GW1000 device. However, I'm not seeing any graphs. How do I add those > reports. The EcoWitt site does report air quality numbers so I know the > device is working. > > The WH0290 cannot be configured in the GW1000. What can be configured is > the WH41 or WH43 PM2.5 sensor. > (this may sound like splitting hairs, but the WH0290 is a minimalistic > console and not a sensor). > > The GW1000 should recognize the WH41/43 - and the weewx database field > name is pm2_5 > > -------------------------------- > in weewx.conf in the > > [StdReport] > [[Default]] > [[[Labels]]] > [[[[Generic]]]] # stanza you can give it a name e.g. PM2.5 indoor > or PM2.5 outdoor > ...... > inTemp = Inside Temperature > outHumidity = outside Humidity > ..... > pm2_5 = PM2.5 indoor > > -------------------------------- > in skin.conf you will have to add under > > [ImageGenerator] > [[day_image]] > ...... > [[[daytempdew]]] > [[[[outTemp]]]] > [[[[dewpoint]]]] > ...... > [[[daypm25]]]i > yscale = None, None, 0.5 > [[[[pm2_5]]]] > > you will also have to add entries for > > [[week_image]] > .... > [[[weekpm25]]] > yscale = None, None, 0.5 > [[[[pm2_5]]]] > ..... > > [[month_image]] > > [[year_image]] > > ----------------------------- > > in index.html.tmpl you will have to add > > > ........ > #if $day.inTemp.has_data > <img src="daytempin.png" alt="$obs.label.inTemp" /> > #end if > #if $day.inHumidity.has_data > <img src="dayhumin.png" alt="$obs.label.inHumidity" /> > #end if > ........ > > #if $day.pm2_5.has_data or $day.pm1_0.has_data > <img src="daypm25.png" alt="$obs.label.pm2_5" /> > #end if > > > > similarly for week, month and year > > Good luck and have fun ! > > > Thanks in advance and thanks to the developers for a fun project. > Clifford > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/25cc1d1d-519c-48d3-b02b-3d27bee703a2n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/25cc1d1d-519c-48d3-b02b-3d27bee703a2n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5043f8d5-9993-42f0-ba8a-1044aaf2c1aan%40googlegroups.com.
