Yes the WH41 is just a WH0290 without a console. Certainly both Belchertown and Weather34 skins support WH41 with not too much effort but I would follow Gary’s suggestion and look at the default Seasons skin in the first instance.
Ian On Wed, 4 Aug 2021 at 01:13, gjr80 <[email protected]> wrote: > I'm guessing the WH0290 is just a WH41 outdoor AQI sensor with its own > display. If that's the case, and given a GW1000 is reporting AQI data to > ecowitt.net, I'm also guessing the existing GW1000 driver will pick up > the AQI data via the GW1000 without problem. Judging by the fact the GW1000 > driver is providing data in pm2_5 I'm further guessing it is working > fine. Simple check is to run the GW1000 driver directly and if all expected > data is there nothing more needs to be done. If something is missing or > wrong we can capture the raw GW1000 API output data and make changes as > required. > > The other side of the coin is displaying the data. You don't mention what > skin you are using to display your data. If it is the WeeWX default Seasons > skin you may find the Adapting the Seasons skin to display a new field > <https://github.com/gjr80/weewx-gw1000/wiki/Adapting-the-Seasons-skin-to-display-a-new-field> > and Adapting the Seasons skin to display GW1000 sensor battery states > <https://github.com/gjr80/weewx-gw1000/wiki/Adapting-the-Seasons-skin-to-display-battery-states> > pages in the GW1000 driver wiki may be helpful. They may not cover exactly > what you want to do but they should give you some pointers on what you can > do/need to do to modify with the Seasons skin. > > Gary > > On Wednesday, 4 August 2021 at 08:56:35 UTC+10 Clifford Snow wrote: > >> Vince - thanks for the suggestions. >> >> When I look at the .tmpl files and comment out the ones I don't want, >> nothing happens. I even ran wee_reports with the current epoch time with no >> change. I'm assuming that I need to comment out lines in index.html.tmpl >> under the enabled skin I'm using. >> >> The gw1000 driver is reporting air quality number for pm2_5 and >> pm2_51_24h_avg. >> >> Clifford >> >> On Tuesday, August 3, 2021 at 3:03:01 PM UTC-7 vince wrote: >> >>> In general you want to look in the .tmpl template files for the skin(s) >>> that you have enabled and simply comment out the block of code for each >>> thing you do not have and it will take effect the next time the pages are >>> generated (usually 5 minutes). That'll make anything extra go away pretty >>> quickly. >>> >>> A quick glance at the code seems to say the WH0290 is not yet supported >>> by the GW1000 driver but Gary will undoubtedly chime in and walk you >>> through how to figure out what the driver can currently see. It's >>> possible it's a quick thing to add in hopefully. You could try a quick >>> test using the commands in item 5 in >>> https://github.com/gjr80/weewx-gw1000 to see if the driver sees >>> anything currently or not. >>> >>> To add the air quality you'd need to map those measurements in your >>> weewx.conf or skin.conf and 'add' something to the .tmpl template(s) you >>> want them displayed on. >>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/6128085f-d037-4a9f-92ce-202c3a7d92d1n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/6128085f-d037-4a9f-92ce-202c3a7d92d1n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADASSaS9N2k2z_D0PFNZMKbpqgQsjRza0Mfkpo6fzpTbowj0dg%40mail.gmail.com.
