Normaly they have both connectivity! one in vlan 1 and one in vlan 2 for example. But on different L2 switches. Weewx is on switch 1 - WiFi Router with GW1000 is on switch 2. I've had a small spanning tree issue on the uplink between switch1 and switch2, later I see that weewx is down. As you describe all work correct. I think about to go back to interceptor - I loss data for the monent ,but weewx is still running.....if connection come back.
vince schrieb am Donnerstag, 9. September 2021 um 18:04:23 UTC+2: > > If you VLAN your network, you still need to permit (1) and (2) above for > everything to work together. > Normaly they have both connectivity! one in vlan 1 and one in vlan 2 for example. But on different L2 switches. Weewx is on switch 1 - WiFi Router with GW1000 is on switch 2. I've had a small spanning tree issue on the uplink between switch1 and switch2, later I see that weewx is down. As you describe all work correct. I think about to go back to interceptor - I loss data for the monent ,but weewx is still running.....if connection come back. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/73ecffc0-19d2-4a64-b620-6997db70d4a6n%40googlegroups.com.
