I'll do the test - works as expected - restart every 60sec. thx to all.
Jochen [email protected] schrieb am Freitag, 10. September 2021 um 10:15:47 UTC+2: > jepp, I do it also, set 'loop_on_init' to true. gjr80 describe the hole > process- very helpful. > > many thank for help > Jochen > > > > vince schrieb am Freitag, 10. September 2021 um 04:21:53 UTC+2: > >> On Thursday, September 9, 2021 at 6:57:52 PM UTC-7 gjr80 wrote: >> >>> The bottom line is when using the GW1000 driver the recommended approach >>> is to add an address reservation for the GW1000 to your DHCP server so the >>> GW1000 is affectively given a fixed IP address (the GW1000 cannot be >>> programmed with a fixed IP). If the GW1000 is on a different sub-net then >>> this reservation is essential. Specifying the GW1000 IP address and port >>> number in weewx.conf is recommended in most cases and essential if the >>> GW1000 is on a different sub-net. Setting loop_on_init to True is also >>> recommended (in fact when you use wee_config --reconfigure to select >>> the GW1000 driver you are prompted to set loop_on_init) >>> >>> >> Just to confirm, I switched to a loop_on_init=True and used a fixed IP >> reservation in my DHCP server to get a stable address for the GW1000 and it >> 'does' recover nicely for me, so I'd recommend it to jovo...(sorry, can't >> see your name in google groups) as your best next step. >> >> >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4368cd26-8d35-41c1-a71d-0c980936496fn%40googlegroups.com.
