On Thursday, September 9, 2021 at 6:57:52 PM UTC-7 gjr80 wrote: > The bottom line is when using the GW1000 driver the recommended approach > is to add an address reservation for the GW1000 to your DHCP server so the > GW1000 is affectively given a fixed IP address (the GW1000 cannot be > programmed with a fixed IP). If the GW1000 is on a different sub-net then > this reservation is essential. Specifying the GW1000 IP address and port > number in weewx.conf is recommended in most cases and essential if the > GW1000 is on a different sub-net. Setting loop_on_init to True is also > recommended (in fact when you use wee_config --reconfigure to select the > GW1000 driver you are prompted to set loop_on_init) > > Just to confirm, I switched to a loop_on_init=True and used a fixed IP reservation in my DHCP server to get a stable address for the GW1000 and it 'does' recover nicely for me, so I'd recommend it to jovo...(sorry, can't see your name in google groups) as your best next step.
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b3b74b87-0d06-43e9-89ed-d71ee46bc2a7n%40googlegroups.com.
