I've been seeing the same behavior here using the WeatherFlowUDP driver, but in my case both pressure and dewpoint are missing from most rapidfire updates. It looks like dewpoint is also a problem on yours.
This behavior appears to have started in 4.6.0 and continues in 4.6.1 and 4.6.2. I downgraded to 4.5.1 and the "cached" data is included in every rapidfire update. I took a quick look through the code yesterday and couldn't find the problem, but I was hoping to take a closer look at it this weekend. - Keith On Saturday, February 26, 2022 at 8:14:06 AM UTC-5 [email protected] wrote: > I meant to say, WeatherLinkLiveUDP is set to 10s interval, it makes no > difference at 30s, so I assume the UDP packets from WLL only send the > pressure every 30 seconds or so. > > On Saturday, February 26, 2022 at 12:42:05 PM UTC Rory Gillies wrote: > >> Hi, >> >> I am using the WeatherLinkLiveUDP driver with Weewx to access my David >> Vantage Pro2 Plus station. Everything works a treat (you can see my weather >> page here using the excellent Neowx-Material skin: >> https://www.360shetland.co.uk/weather/index.html >> >> I upload to PWS Weather, Windy, and Weather Underground using the >> rapidfire mode. I had an issue with wind speed being higher than wind gust >> speed which I have fixed, however the pressure value only seems to be >> updated every 30 seconds rather than with each loop. My WU Rapid station is >> here: https://www.wunderground.com/dashboard/pws/ISHETL39/ >> >> Is there any way to append the pressure value to the loop data that is >> uploaded? Although the pressure is recorded and can be seen in the station >> current condition, the pressure dial disappears for 30 seconds then appears >> briefly until the next loop packet is uploaded. It's not the end of the >> world, but I would like the pressure dial to be there all the time. >> >> Thanks, >> >> Rory >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/812ab6df-1db8-4bf3-bb5e-7dd63fbd6a86n%40googlegroups.com.
