Thanks it worked! But the <td> tables somehow broke the 2-row listing of the graphs so i left it out for now. As i already got all the graphs i need.
Will I have to do modify these files (including skin.conf, extensions.py) again after the update to weewx 4.7? Your SDR setup looks very nicely tweaked. How did you get the snr/noise/rssi and signal quality info and how to put them into weewx? an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1: > i do not have public access to my weather page so if you want to see some > of it these are about a 3rd of it starting at the top > > On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote: > >> in Seasons/skin.conf >> plot_groups list the plots to show >> >> moistsoil shows the plots for soilMoist1-4 >> tempsoil for soilTemp1-4 >> >> if you remove moistsoil, tempsoil from the list will stop showing the >> plots >> >> you would have to add to plot_groups the extra wind stuff say extrawind, >> extrawinddir, then under [ImageGenerator] section you would have to >> something like >> >> [[[dayextrawind]]] >> [[[[soilMoist1]]]] >> [[[[soilMoist2]]]] >> >> to do it for week, month, and year for week, month and year add >> aggregate_type = max for week plot something like >> >> [[[weekextrawind]]] >> [[[[soilMoist1]]]] >> [[[[soilMoist2]]]] >> aggregate_type = max >> >> for direction an agian for week, month and year >> [[[dayextrawinddir]]] >> yscale = 0.0, 360.0, 45.0 >> line_type = None >> marker_type = box >> marker_size = 2 >> [[[[soilTemp4]]]] >> >> in Seasons/current.inc file after the last #end for and before </tbody> >> add something like >> >> <tr> >> <td class="label">Wind Speed</td> >> <td class="data">$current.soilMoist1 $current.soilTemp1.ordinal_compass >> ($current.soilTemp1)</td> >> <tr> >> >> no restart is needed for that just the next report cycle >> >> On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 [email protected] wrote: >> >>> As the database is quite new i just deleted the few soilMost3 entries >>> out and made a >>> >>> sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01 >>> --config=/etc/weewx/weewx-sdr.conf >>> >>> and started weewx-sdr again, now it's looking quite good. I'm still >>> trying to figure out how to change the wind direction lines to dots? >>> >>> >>> [email protected] schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1: >>> >>>> That's good to know, so I have to repeat these steps after a weewx >>>> update? >>>> >>>> I have it now running with the additional sensors: >>>> http://meteo.fankyy.ch/WsDi1c_sdr/ >>>> Not sure if the rain graph will only appear after it begins with rain >>>> count? >>>> >>>> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in >>>> one graph, with the highest number 360 for wind direction, the speed is >>>> barely visible. So i use soiltemp4 for the wind direction now and hope, >>>> the >>>> back-to-normal named soilMoist3 will go out of the daily graph after 24h? >>>> Is there an easy way to delete it out of the database, without having to >>>> examine/stopping the database for a long time? >>>> >>>> I couldn't find where tho do this step: >>>> then to display wind speed you would use $current.soilMoist1 in a >>>> template >>>> and for wind dir $current.soilMoist2 and/or >>>> $current.soilMoist2.ordinal_compass >>>> in the seasons skin >>>> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1: >>>> >>>>> there are other units. just look at the schema file to see what there >>>>> is. >>>>> if your station sends wind gust you could one that's not in use. >>>>> acurite 5n1 do not send wind gust just wind speed and dir. to get the >>>>> extra wind stuff i have to hack weewx files for every weewx update. >>>>> >>>>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 [email protected] >>>>> wrote: >>>>> >>>>>> That would be a good and much simpler solution if it works, will >>>>>> definitely try this. Is there some unit remaining which i could use for >>>>>> wind_gust? >>>>>> >>>>>> Thanks a lot! >>>>>> >>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1: >>>>>> >>>>>>> you could try something like in this if >>>>>>> soilMoist1, soilMoist2, extraTemp1, extraHumid1, windBatteryStatus >>>>>>> and hail are unsed >>>>>>> >>>>>>> in weewx.conf >>>>>>> [SDR] >>>>>>> [[sensor_map]] >>>>>>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2 >>>>>>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2 >>>>>>> extraTemp1 = temperature.1276.Acurite5n1PacketV2 >>>>>>> extraHumid1 = humidity.1276.Acurite5n1PacketV2 >>>>>>> windBatteryStatus = battery.1276.Acurite5n1PacketV2 >>>>>>> hail_total = rain_total.1276.Acurite5n1PacketV2 >>>>>>> [[deltas]] >>>>>>> hail = hail_total >>>>>>> >>>>>>> [Accumulator] >>>>>>> [[hail]] >>>>>>> extractor = sum >>>>>>> >>>>>>> and in extensions.py >>>>>>> import weewx.units >>>>>>> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed' >>>>>>> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction' >>>>>>> >>>>>>> then to display wind speed you would use $current.soilMoist1 in a >>>>>>> template >>>>>>> and for wind dir $current.soilMoist2 and/or >>>>>>> $current.soilMoist2.ordinal_compass >>>>>>> >>>>>>> not shure where to change the labels at but i think in 4.6.2 it is >>>>>>> in the lang files >>>>>>> say in en.conf >>>>>>> [Labels] >>>>>>> [[Generic]] >>>>>>> soilMoist1 = Wind Speed (5n1) >>>>>>> soilMoist2 = Wind Direction (5n1) >>>>>>> windBatteryStatus = Battery (5n1) >>>>>>> hail = Rain (5n1) >>>>>>> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on. >>>>>>> >>>>>>> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman wrote: >>>>>>> >>>>>>>> that config won't work with your set up, had to add a lot to the >>>>>>>> sdr driver for sensors, make some extension, add to the schema and >>>>>>>> user/extensions.py file and change some weewx core files. >>>>>>>> look in the wiki under data management Switching to the new, >>>>>>>> extended schema wview_extended >>>>>>>> <https://github.com/weewx/weewx/wiki/Switching-to-the-new-wview_extended-schema> >>>>>>>> . >>>>>>>> >>>>>>>> >>>>>>>> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 >>>>>>>> [email protected] wrote: >>>>>>>> >>>>>>>>> Now that's really great, thanks for the config. Where or how >>>>>>>>> exactly do i have to add the entrys in the schema file? >>>>>>>>> >>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 UTC+1: >>>>>>>>> >>>>>>>>>> I have >>>>>>>>>> here is my sdr from weewx.conf >>>>>>>>>> extraTemp, batteryStatus, extraHumid1 - 8 are in the >>>>>>>>>> wview_extended.py schema. >>>>>>>>>> I had to add to the schema extrawindSpeed, extrawindDir, >>>>>>>>>> lightning_distance15, lightning_strike_count15 and extraTemp, >>>>>>>>>> batteryStatus, extraHumid 9 - 16. >>>>>>>>>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine >>>>>>>>>> them to get 1 working 5n1. >>>>>>>>>> >>>>>>>>>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 >>>>>>>>>> [email protected] wrote: >>>>>>>>>> >>>>>>>>>>> Would it be possible to record data from two or more full sensor >>>>>>>>>>> arrays (including wind and rain) in one weewx instance? Or record >>>>>>>>>>> the data >>>>>>>>>>> in multiple weewx instances with only one SDR-stick? >>>>>>>>>>> >>>>>>>>>>> I know multiple SDR sticks to multiple weewx instances is >>>>>>>>>>> possible, but how could it be done with just one stick? >>>>>>>>>>> >>>>>>>>>>> I already achieved to get the temperature from a second sensor >>>>>>>>>>> with the extraTempSensor value in the sensor map, but i guess this >>>>>>>>>>> wouldn't >>>>>>>>>>> work for wind and rain? It seems like it would need basically only >>>>>>>>>>> an >>>>>>>>>>> adaption to the schema and database, but to edit these seems a bit >>>>>>>>>>> complex >>>>>>>>>>> for me, has anyone ever done this? >>>>>>>>>>> >>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/bd3bf473-aa91-490d-938d-a061239eb5a1n%40googlegroups.com.
