this is the output for rtl_433 -M utc -M protocol -M level -F json command
for acurite atlas sensor
{"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
"battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
"lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
"raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi"
: -4.499, "snr" : 28.102, "noise" : -32.602}
{"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
"battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
"lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
"raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi"
: -4.499, "snr" : 28.102, "noise" : -32.602}
{"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2,
"battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2,
"lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0,
"raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi"
: -4.499, "snr" : 28.102, "noise" : -32.602}
{"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
"battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
"temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
"strike_distance" : 10, "exception" : 0, "raw_msg" :
"81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
"snr" : 27.083, "noise" : -32.144}
{"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
"battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
"temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
"strike_distance" : 10, "exception" : 0, "raw_msg" :
"85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
"snr" : 27.083, "noise" : -32.144}
{"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2,
"battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000,
"temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3,
"strike_distance" : 10, "exception" : 0, "raw_msg" :
"89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061,
"snr" : 27.083, "noise" : -32.144}
{"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0,
"battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000,
"wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3,
"strike_distance" : 10, "exception" : 0, "raw_msg" :
"81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818,
"snr" : 28.326, "noise" : -32.144}
{"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" :
"Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1,
"battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000,
"wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3,
"strike_distance" : 10, "exception" : 0, "raw_msg" :
"85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818,
"snr" : 28.326, "noise" : -32.144}
you could add them to sdr.py i added them for some acurite sensors that did
not have them it looks something like
# connection diagnostics (-M level)
if 'mod' in obj:
pkt['mod'] = obj.get('mod')
if 'freq' in obj:
pkt['freq'] = Packet.get_float(obj, 'freq')
if 'rssi' in obj:
pkt['rssi'] = Packet.get_float(obj, 'rssi')
if 'snr' in obj:
pkt['snr'] = obj.get('snr')
if 'noise' in obj:
pkt['noise'] = obj.get('noise')
yes must be in the sensor map
here is what is in my for my acurite atlas [sensor_map] for rssi, freq,
snr, noise, protocol
rssi = rssi.494.AcuriteAtlasPacket
freq = freq.494.AcuriteAtlasPacket
snr = snr.494.AcuriteAtlasPacket
noise = noise.494.AcuriteAtlasPacket
protocol = protocol.494.AcuriteAtlasPacket
On Thursday, March 3, 2022 at 8:12:42 AM UTC-6 [email protected] wrote:
> They don't seem to be in sdr.py for my stations. Would it work to add it
> manually to sdr.py for the wh65b and whx080?
> And do I have to add these to the sensor map?
>
> an oldman schrieb am Donnerstag, 3. März 2022 um 13:43:42 UTC+1:
>
>> I do know about the skin.conf and Seasons files, but the extensions.py
>> and weewx.conf should be ok.
>> I backup all of weewx before any upgrade, then check the files i modified
>>
>> for snr/noise/rssi rtl_433 use the -M level switch here is the command i
>> use
>> /usr/local/bin/rtl_433 -M utc -M protocol -M level -F json
>>
>> Use "protocol" / "noprotocol" to output the decoder protocol number meta
>> data.
>> Use "level" to add Modulation, Frequency, RSSI, SNR, and Noise meta data.
>> but i don't know if sdr.py puts them in the loop data for all sensors.
>> snr/noise/rssi/frequency are not saved to the database so only the
>> current tag works for them and to get them formated added to extensions.py
>> weewx.units.obs_group_dict['noise'] = 'group_db'
>> weewx.units.obs_group_dict['rssi'] = 'group_db'
>> weewx.units.obs_group_dict['snr'] = 'group_db'
>>
>> to get the signal in weewx.conf i have this
>>
>> [StdCalibrate]
>> [[Corrections]]
>> rxCheckPercent = rssi + 100
>> signal1 = rssi1 + 100
>>
>> On Thursday, March 3, 2022 at 4:21:32 AM UTC-6 [email protected] wrote:
>>
>>> Thanks it worked!
>>>
>>> But the <td> tables somehow broke the 2-row listing of the graphs so i
>>> left it out for now. As i already got all the graphs i need.
>>>
>>> Will I have to do modify these files (including skin.conf,
>>> extensions.py) again after the update to weewx 4.7?
>>>
>>> Your SDR setup looks very nicely tweaked. How did you get the
>>> snr/noise/rssi and signal quality info and how to put them into weewx?
>>>
>>> an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1:
>>>
>>>> i do not have public access to my weather page so if you want to see
>>>> some of it these are about a 3rd of it starting at the top
>>>>
>>>> On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote:
>>>>
>>>>> in Seasons/skin.conf
>>>>> plot_groups list the plots to show
>>>>>
>>>>> moistsoil shows the plots for soilMoist1-4
>>>>> tempsoil for soilTemp1-4
>>>>>
>>>>> if you remove moistsoil, tempsoil from the list will stop showing the
>>>>> plots
>>>>>
>>>>> you would have to add to plot_groups the extra wind stuff say
>>>>> extrawind, extrawinddir, then under [ImageGenerator] section you would
>>>>> have
>>>>> to something like
>>>>>
>>>>> [[[dayextrawind]]]
>>>>> [[[[soilMoist1]]]]
>>>>> [[[[soilMoist2]]]]
>>>>>
>>>>> to do it for week, month, and year for week, month and year add
>>>>> aggregate_type = max for week plot something like
>>>>>
>>>>> [[[weekextrawind]]]
>>>>> [[[[soilMoist1]]]]
>>>>> [[[[soilMoist2]]]]
>>>>> aggregate_type = max
>>>>>
>>>>> for direction an agian for week, month and year
>>>>> [[[dayextrawinddir]]]
>>>>> yscale = 0.0, 360.0, 45.0
>>>>> line_type = None
>>>>> marker_type = box
>>>>> marker_size = 2
>>>>> [[[[soilTemp4]]]]
>>>>>
>>>>> in Seasons/current.inc file after the last #end for and before
>>>>> </tbody> add something like
>>>>>
>>>>> <tr>
>>>>> <td class="label">Wind Speed</td>
>>>>> <td class="data">$current.soilMoist1
>>>>> $current.soilTemp1.ordinal_compass ($current.soilTemp1)</td>
>>>>> <tr>
>>>>>
>>>>> no restart is needed for that just the next report cycle
>>>>>
>>>>> On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 [email protected] wrote:
>>>>>
>>>>>> As the database is quite new i just deleted the few soilMost3 entries
>>>>>> out and made a
>>>>>>
>>>>>> sudo wee_database --rebuild-daily --from=2022-03-01 --to=2022-03-01
>>>>>> --config=/etc/weewx/weewx-sdr.conf
>>>>>>
>>>>>> and started weewx-sdr again, now it's looking quite good. I'm still
>>>>>> trying to figure out how to change the wind direction lines to dots?
>>>>>>
>>>>>>
>>>>>> [email protected] schrieb am Dienstag, 1. März 2022 um 13:37:09 UTC+1:
>>>>>>
>>>>>>> That's good to know, so I have to repeat these steps after a weewx
>>>>>>> update?
>>>>>>>
>>>>>>> I have it now running with the additional sensors:
>>>>>>> http://meteo.fankyy.ch/WsDi1c_sdr/
>>>>>>> Not sure if the rain graph will only appear after it begins with
>>>>>>> rain count?
>>>>>>>
>>>>>>> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all in
>>>>>>> one graph, with the highest number 360 for wind direction, the speed is
>>>>>>> barely visible. So i use soiltemp4 for the wind direction now and hope,
>>>>>>> the
>>>>>>> back-to-normal named soilMoist3 will go out of the daily graph after
>>>>>>> 24h?
>>>>>>> Is there an easy way to delete it out of the database, without having
>>>>>>> to
>>>>>>> examine/stopping the database for a long time?
>>>>>>>
>>>>>>> I couldn't find where tho do this step:
>>>>>>> then to display wind speed you would use $current.soilMoist1 in a
>>>>>>> template
>>>>>>> and for wind dir $current.soilMoist2 and/or
>>>>>>> $current.soilMoist2.ordinal_compass
>>>>>>> in the seasons skin
>>>>>>> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1:
>>>>>>>
>>>>>>>> there are other units. just look at the schema file to see what
>>>>>>>> there is.
>>>>>>>> if your station sends wind gust you could one that's not in use.
>>>>>>>> acurite 5n1 do not send wind gust just wind speed and dir. to get
>>>>>>>> the extra wind stuff i have to hack weewx files for every weewx update.
>>>>>>>>
>>>>>>>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 [email protected]
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> That would be a good and much simpler solution if it works, will
>>>>>>>>> definitely try this. Is there some unit remaining which i could use
>>>>>>>>> for
>>>>>>>>> wind_gust?
>>>>>>>>>
>>>>>>>>> Thanks a lot!
>>>>>>>>>
>>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 UTC+1:
>>>>>>>>>
>>>>>>>>>> you could try something like in this if
>>>>>>>>>> soilMoist1, soilMoist2, extraTemp1, extraHumid1,
>>>>>>>>>> windBatteryStatus and hail are unsed
>>>>>>>>>>
>>>>>>>>>> in weewx.conf
>>>>>>>>>> [SDR]
>>>>>>>>>> [[sensor_map]]
>>>>>>>>>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2
>>>>>>>>>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2
>>>>>>>>>> extraTemp1 = temperature.1276.Acurite5n1PacketV2
>>>>>>>>>> extraHumid1 = humidity.1276.Acurite5n1PacketV2
>>>>>>>>>> windBatteryStatus = battery.1276.Acurite5n1PacketV2
>>>>>>>>>> hail_total = rain_total.1276.Acurite5n1PacketV2
>>>>>>>>>> [[deltas]]
>>>>>>>>>> hail = hail_total
>>>>>>>>>>
>>>>>>>>>> [Accumulator]
>>>>>>>>>> [[hail]]
>>>>>>>>>> extractor = sum
>>>>>>>>>>
>>>>>>>>>> and in extensions.py
>>>>>>>>>> import weewx.units
>>>>>>>>>> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed'
>>>>>>>>>> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction'
>>>>>>>>>>
>>>>>>>>>> then to display wind speed you would use $current.soilMoist1 in a
>>>>>>>>>> template
>>>>>>>>>> and for wind dir $current.soilMoist2 and/or
>>>>>>>>>> $current.soilMoist2.ordinal_compass
>>>>>>>>>>
>>>>>>>>>> not shure where to change the labels at but i think in 4.6.2 it
>>>>>>>>>> is in the lang files
>>>>>>>>>> say in en.conf
>>>>>>>>>> [Labels]
>>>>>>>>>> [[Generic]]
>>>>>>>>>> soilMoist1 = Wind Speed (5n1)
>>>>>>>>>> soilMoist2 = Wind Direction (5n1)
>>>>>>>>>> windBatteryStatus = Battery (5n1)
>>>>>>>>>> hail = Rain (5n1)
>>>>>>>>>> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on.
>>>>>>>>>>
>>>>>>>>>> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> that config won't work with your set up, had to add a lot to the
>>>>>>>>>>> sdr driver for sensors, make some extension, add to the schema and
>>>>>>>>>>> user/extensions.py file and change some weewx core files.
>>>>>>>>>>> look in the wiki under data management Switching to the new,
>>>>>>>>>>> extended schema wview_extended
>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Switching-to-the-new-wview_extended-schema>
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6
>>>>>>>>>>> [email protected] wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Now that's really great, thanks for the config. Where or how
>>>>>>>>>>>> exactly do i have to add the entrys in the schema file?
>>>>>>>>>>>>
>>>>>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11
>>>>>>>>>>>> UTC+1:
>>>>>>>>>>>>
>>>>>>>>>>>>> I have
>>>>>>>>>>>>> here is my sdr from weewx.conf
>>>>>>>>>>>>> extraTemp, batteryStatus, extraHumid1 - 8 are in the
>>>>>>>>>>>>> wview_extended.py schema.
>>>>>>>>>>>>> I had to add to the schema extrawindSpeed, extrawindDir,
>>>>>>>>>>>>> lightning_distance15, lightning_strike_count15 and extraTemp,
>>>>>>>>>>>>> batteryStatus, extraHumid 9 - 16.
>>>>>>>>>>>>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to combine
>>>>>>>>>>>>> them to get 1 working 5n1.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6
>>>>>>>>>>>>> [email protected] wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Would it be possible to record data from two or more full
>>>>>>>>>>>>>> sensor arrays (including wind and rain) in one weewx instance?
>>>>>>>>>>>>>> Or record
>>>>>>>>>>>>>> the data in multiple weewx instances with only one SDR-stick?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I know multiple SDR sticks to multiple weewx instances is
>>>>>>>>>>>>>> possible, but how could it be done with just one stick?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I already achieved to get the temperature from a second
>>>>>>>>>>>>>> sensor with the extraTempSensor value in the sensor map, but i
>>>>>>>>>>>>>> guess this
>>>>>>>>>>>>>> wouldn't work for wind and rain? It seems like it would need
>>>>>>>>>>>>>> basically only
>>>>>>>>>>>>>> an adaption to the schema and database, but to edit these seems
>>>>>>>>>>>>>> a bit
>>>>>>>>>>>>>> complex for me, has anyone ever done this?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/db3dab70-ffa9-412d-8d8b-1ddddd8dbddcn%40googlegroups.com.
