Thanks I will definitely try it out. In the meantime I discovered, in an other weewx instance where the WH65 is the secondary/extra sensor, which sends 3 to 4 packets per minute, that the plots daily to monthly only contain the current wind gust after each 60 seconds, while the statistics sucessfully keep the max gust of the full minute. (as shown in my other thread)
I'm using soilMoist for that sensor and aggregate type = max is already set for weekly and mothly in skin.conf. Is there anything else I could try to fix this? an oldman schrieb am Donnerstag, 3. März 2022 um 20:25:55 UTC+1: > it's matthewwall weewx-sdr driver > i just copied and pasted the parts i needed > > On Thursday, March 3, 2022 at 12:36:39 PM UTC-6 [email protected] wrote: > >> Have you considered using Python's JSON function to put the whole thing >> into a dictionary so there's no need for all the if statements? >> >> On Thu, Mar 3, 2022, 10:26 AM an oldman <[email protected]> wrote: >> >>> this is the output for rtl_433 -M utc -M protocol -M level -F json >>> command for acurite atlas sensor >>> >>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, >>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, >>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, >>> "raw_msg" : "81eee78142a3e7006a0d", "mod" : "ASK", "freq" : 433.946, "rssi" >>> : -4.499, "snr" : 28.102, "noise" : -32.602} >>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, >>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, >>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, >>> "raw_msg" : "85eee78142a3e7006a11", "mod" : "ASK", "freq" : 433.946, "rssi" >>> : -4.499, "snr" : 28.102, "noise" : -32.602} >>> {"time" : "2022-03-03 18:16:57", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, >>> "battery_ok" : 1, "message_type" : 39, "wind_avg_mi_h" : 3.000, "uv" : 2, >>> "lux" : 45830, "strike_count" : 3, "strike_distance" : 10, "exception" : 0, >>> "raw_msg" : "89eee78142a3e7006a15", "mod" : "ASK", "freq" : 433.946, "rssi" >>> : -4.499, "snr" : 28.102, "noise" : -32.602} >>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, >>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, >>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, >>> "strike_distance" : 10, "exception" : 0, "raw_msg" : >>> "81ee65824422c5006aeb", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, >>> "snr" : 27.083, "noise" : -32.144} >>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, >>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, >>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, >>> "strike_distance" : 10, "exception" : 0, "raw_msg" : >>> "85ee65824422c5006aef", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, >>> "snr" : 27.083, "noise" : -32.144} >>> {"time" : "2022-03-03 18:17:07", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 2, >>> "battery_ok" : 1, "message_type" : 37, "wind_avg_mi_h" : 5.000, >>> "temperature_F" : 14.600, "humidity" : 69, "strike_count" : 3, >>> "strike_distance" : 10, "exception" : 0, "raw_msg" : >>> "89ee65824422c5006af3", "mod" : "ASK", "freq" : 433.947, "rssi" : -5.061, >>> "snr" : 27.083, "noise" : -32.144} >>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 0, >>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, >>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, >>> "strike_distance" : 10, "exception" : 0, "raw_msg" : >>> "81ee6682427872006aed", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, >>> "snr" : 28.326, "noise" : -32.144} >>> {"time" : "2022-03-03 18:17:18", "protocol" : 40, "model" : >>> "Acurite-Atlas", "id" : 494, "channel" : "B", "sequence_num" : 1, >>> "battery_ok" : 1, "message_type" : 38, "wind_avg_mi_h" : 5.000, >>> "wind_dir_deg" : 94.000, "rain_in" : 1.140, "strike_count" : 3, >>> "strike_distance" : 10, "exception" : 0, "raw_msg" : >>> "85ee6682427872006af1", "mod" : "ASK", "freq" : 433.948, "rssi" : -3.818, >>> "snr" : 28.326, "noise" : -32.144} >>> >>> you could add them to sdr.py i added them for some acurite sensors that >>> did not have them it looks something like >>> # connection diagnostics (-M level) >>> if 'mod' in obj: >>> pkt['mod'] = obj.get('mod') >>> if 'freq' in obj: >>> pkt['freq'] = Packet.get_float(obj, 'freq') >>> if 'rssi' in obj: >>> pkt['rssi'] = Packet.get_float(obj, 'rssi') >>> if 'snr' in obj: >>> pkt['snr'] = obj.get('snr') >>> if 'noise' in obj: >>> pkt['noise'] = obj.get('noise') >>> >>> yes must be in the sensor map >>> >>> here is what is in my for my acurite atlas [sensor_map] for rssi, freq, >>> snr, noise, protocol >>> rssi = rssi.494.AcuriteAtlasPacket >>> freq = freq.494.AcuriteAtlasPacket >>> snr = snr.494.AcuriteAtlasPacket >>> noise = noise.494.AcuriteAtlasPacket >>> protocol = protocol.494.AcuriteAtlasPacket >>> >>> On Thursday, March 3, 2022 at 8:12:42 AM UTC-6 [email protected] wrote: >>> >>>> They don't seem to be in sdr.py for my stations. Would it work to add >>>> it manually to sdr.py for the wh65b and whx080? >>>> And do I have to add these to the sensor map? >>>> >>>> an oldman schrieb am Donnerstag, 3. März 2022 um 13:43:42 UTC+1: >>>> >>>>> I do know about the skin.conf and Seasons files, but the extensions.py >>>>> and weewx.conf should be ok. >>>>> I backup all of weewx before any upgrade, then check the files i >>>>> modified >>>>> >>>>> for snr/noise/rssi rtl_433 use the -M level switch here is the command >>>>> i use >>>>> /usr/local/bin/rtl_433 -M utc -M protocol -M level -F json >>>>> >>>>> Use "protocol" / "noprotocol" to output the decoder protocol number >>>>> meta data. >>>>> Use "level" to add Modulation, Frequency, RSSI, SNR, and Noise meta >>>>> data. >>>>> but i don't know if sdr.py puts them in the loop data for all sensors. >>>>> snr/noise/rssi/frequency are not saved to the database so only the >>>>> current tag works for them and to get them formated added to extensions.py >>>>> weewx.units.obs_group_dict['noise'] = 'group_db' >>>>> weewx.units.obs_group_dict['rssi'] = 'group_db' >>>>> weewx.units.obs_group_dict['snr'] = 'group_db' >>>>> >>>>> to get the signal in weewx.conf i have this >>>>> >>>>> [StdCalibrate] >>>>> [[Corrections]] >>>>> rxCheckPercent = rssi + 100 >>>>> signal1 = rssi1 + 100 >>>>> >>>>> On Thursday, March 3, 2022 at 4:21:32 AM UTC-6 [email protected] wrote: >>>>> >>>>>> Thanks it worked! >>>>>> >>>>>> But the <td> tables somehow broke the 2-row listing of the graphs so >>>>>> i left it out for now. As i already got all the graphs i need. >>>>>> >>>>>> Will I have to do modify these files (including skin.conf, >>>>>> extensions.py) again after the update to weewx 4.7? >>>>>> >>>>>> Your SDR setup looks very nicely tweaked. How did you get the >>>>>> snr/noise/rssi and signal quality info and how to put them into weewx? >>>>>> >>>>>> an oldman schrieb am Dienstag, 1. März 2022 um 23:34:06 UTC+1: >>>>>> >>>>>>> i do not have public access to my weather page so if you want to see >>>>>>> some of it these are about a 3rd of it starting at the top >>>>>>> >>>>>>> On Tuesday, March 1, 2022 at 11:57:42 AM UTC-6 an oldman wrote: >>>>>>> >>>>>>>> in Seasons/skin.conf >>>>>>>> plot_groups list the plots to show >>>>>>>> >>>>>>>> moistsoil shows the plots for soilMoist1-4 >>>>>>>> tempsoil for soilTemp1-4 >>>>>>>> >>>>>>>> if you remove moistsoil, tempsoil from the list will stop showing >>>>>>>> the plots >>>>>>>> >>>>>>>> you would have to add to plot_groups the extra wind stuff say >>>>>>>> extrawind, extrawinddir, then under [ImageGenerator] section you would >>>>>>>> have >>>>>>>> to something like >>>>>>>> >>>>>>>> [[[dayextrawind]]] >>>>>>>> [[[[soilMoist1]]]] >>>>>>>> [[[[soilMoist2]]]] >>>>>>>> >>>>>>>> to do it for week, month, and year for week, month and year add >>>>>>>> aggregate_type = max for week plot something like >>>>>>>> >>>>>>>> [[[weekextrawind]]] >>>>>>>> [[[[soilMoist1]]]] >>>>>>>> [[[[soilMoist2]]]] >>>>>>>> aggregate_type = max >>>>>>>> >>>>>>>> for direction an agian for week, month and year >>>>>>>> [[[dayextrawinddir]]] >>>>>>>> yscale = 0.0, 360.0, 45.0 >>>>>>>> line_type = None >>>>>>>> marker_type = box >>>>>>>> marker_size = 2 >>>>>>>> [[[[soilTemp4]]]] >>>>>>>> >>>>>>>> in Seasons/current.inc file after the last #end for and before >>>>>>>> </tbody> add something like >>>>>>>> >>>>>>>> <tr> >>>>>>>> <td class="label">Wind Speed</td> >>>>>>>> <td class="data">$current.soilMoist1 >>>>>>>> $current.soilTemp1.ordinal_compass ($current.soilTemp1)</td> >>>>>>>> <tr> >>>>>>>> >>>>>>>> no restart is needed for that just the next report cycle >>>>>>>> >>>>>>>> On Tuesday, March 1, 2022 at 10:25:22 AM UTC-6 [email protected] >>>>>>>> wrote: >>>>>>>> >>>>>>>>> As the database is quite new i just deleted the few soilMost3 >>>>>>>>> entries out and made a >>>>>>>>> >>>>>>>>> sudo wee_database --rebuild-daily --from=2022-03-01 >>>>>>>>> --to=2022-03-01 --config=/etc/weewx/weewx-sdr.conf >>>>>>>>> >>>>>>>>> and started weewx-sdr again, now it's looking quite good. I'm >>>>>>>>> still trying to figure out how to change the wind direction lines to >>>>>>>>> dots? >>>>>>>>> >>>>>>>>> >>>>>>>>> [email protected] schrieb am Dienstag, 1. März 2022 um 13:37:09 >>>>>>>>> UTC+1: >>>>>>>>> >>>>>>>>>> That's good to know, so I have to repeat these steps after a >>>>>>>>>> weewx update? >>>>>>>>>> >>>>>>>>>> I have it now running with the additional sensors: >>>>>>>>>> http://meteo.fankyy.ch/WsDi1c_sdr/ >>>>>>>>>> Not sure if the rain graph will only appear after it begins with >>>>>>>>>> rain count? >>>>>>>>>> >>>>>>>>>> I used soilMoist 1-3 for Wind, Gust and Direction, but it put all >>>>>>>>>> in one graph, with the highest number 360 for wind direction, the >>>>>>>>>> speed is >>>>>>>>>> barely visible. So i use soiltemp4 for the wind direction now and >>>>>>>>>> hope, the >>>>>>>>>> back-to-normal named soilMoist3 will go out of the daily graph after >>>>>>>>>> 24h? >>>>>>>>>> Is there an easy way to delete it out of the database, without >>>>>>>>>> having to >>>>>>>>>> examine/stopping the database for a long time? >>>>>>>>>> >>>>>>>>>> I couldn't find where tho do this step: >>>>>>>>>> then to display wind speed you would use $current.soilMoist1 in a >>>>>>>>>> template >>>>>>>>>> and for wind dir $current.soilMoist2 and/or >>>>>>>>>> $current.soilMoist2.ordinal_compass >>>>>>>>>> in the seasons skin >>>>>>>>>> an oldman schrieb am Sonntag, 27. Februar 2022 um 09:11:24 UTC+1: >>>>>>>>>> >>>>>>>>>>> there are other units. just look at the schema file to see what >>>>>>>>>>> there is. >>>>>>>>>>> if your station sends wind gust you could one that's not in use. >>>>>>>>>>> acurite 5n1 do not send wind gust just wind speed and dir. to >>>>>>>>>>> get the extra wind stuff i have to hack weewx files for every weewx >>>>>>>>>>> update. >>>>>>>>>>> >>>>>>>>>>> On Sunday, February 27, 2022 at 1:33:17 AM UTC-6 >>>>>>>>>>> [email protected] wrote: >>>>>>>>>>> >>>>>>>>>>>> That would be a good and much simpler solution if it works, >>>>>>>>>>>> will definitely try this. Is there some unit remaining which i >>>>>>>>>>>> could use >>>>>>>>>>>> for wind_gust? >>>>>>>>>>>> >>>>>>>>>>>> Thanks a lot! >>>>>>>>>>>> >>>>>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 23:47:49 >>>>>>>>>>>> UTC+1: >>>>>>>>>>>> >>>>>>>>>>>>> you could try something like in this if >>>>>>>>>>>>> soilMoist1, soilMoist2, extraTemp1, extraHumid1, >>>>>>>>>>>>> windBatteryStatus and hail are unsed >>>>>>>>>>>>> >>>>>>>>>>>>> in weewx.conf >>>>>>>>>>>>> [SDR] >>>>>>>>>>>>> [[sensor_map]] >>>>>>>>>>>>> soilMoist1 = wind_speed.1276.Acurite5n1PacketV2 >>>>>>>>>>>>> soilMoist2 = wind_dir.1276.Acurite5n1PacketV2 >>>>>>>>>>>>> extraTemp1 = temperature.1276.Acurite5n1PacketV2 >>>>>>>>>>>>> extraHumid1 = humidity.1276.Acurite5n1PacketV2 >>>>>>>>>>>>> windBatteryStatus = battery.1276.Acurite5n1PacketV2 >>>>>>>>>>>>> hail_total = rain_total.1276.Acurite5n1PacketV2 >>>>>>>>>>>>> [[deltas]] >>>>>>>>>>>>> hail = hail_total >>>>>>>>>>>>> >>>>>>>>>>>>> [Accumulator] >>>>>>>>>>>>> [[hail]] >>>>>>>>>>>>> extractor = sum >>>>>>>>>>>>> >>>>>>>>>>>>> and in extensions.py >>>>>>>>>>>>> import weewx.units >>>>>>>>>>>>> weewx.units.obs_group_dict['soilMoist1'] = 'group_speed' >>>>>>>>>>>>> weewx.units.obs_group_dict['soilMoist2'] = 'group_direction' >>>>>>>>>>>>> >>>>>>>>>>>>> then to display wind speed you would use $current.soilMoist1 >>>>>>>>>>>>> in a template >>>>>>>>>>>>> and for wind dir $current.soilMoist2 and/or >>>>>>>>>>>>> $current.soilMoist2.ordinal_compass >>>>>>>>>>>>> >>>>>>>>>>>>> not shure where to change the labels at but i think in 4.6.2 >>>>>>>>>>>>> it is in the lang files >>>>>>>>>>>>> say in en.conf >>>>>>>>>>>>> [Labels] >>>>>>>>>>>>> [[Generic]] >>>>>>>>>>>>> soilMoist1 = Wind Speed (5n1) >>>>>>>>>>>>> soilMoist2 = Wind Direction (5n1) >>>>>>>>>>>>> windBatteryStatus = Battery (5n1) >>>>>>>>>>>>> hail = Rain (5n1) >>>>>>>>>>>>> $obs.label.soilMoist1 should show Wind Speed (5n1) and so on. >>>>>>>>>>>>> >>>>>>>>>>>>> On Saturday, February 26, 2022 at 11:27:03 AM UTC-6 an oldman >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> that config won't work with your set up, had to add a lot to >>>>>>>>>>>>>> the sdr driver for sensors, make some extension, add to the >>>>>>>>>>>>>> schema and >>>>>>>>>>>>>> user/extensions.py file and change some weewx core files. >>>>>>>>>>>>>> look in the wiki under data management Switching to the new, >>>>>>>>>>>>>> extended schema wview_extended >>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Switching-to-the-new-wview_extended-schema> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Saturday, February 26, 2022 at 10:53:58 AM UTC-6 >>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Now that's really great, thanks for the config. Where or how >>>>>>>>>>>>>>> exactly do i have to add the entrys in the schema file? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> an oldman schrieb am Samstag, 26. Februar 2022 um 16:41:11 >>>>>>>>>>>>>>> UTC+1: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I have >>>>>>>>>>>>>>>> here is my sdr from weewx.conf >>>>>>>>>>>>>>>> extraTemp, batteryStatus, extraHumid1 - 8 are in the >>>>>>>>>>>>>>>> wview_extended.py schema. >>>>>>>>>>>>>>>> I had to add to the schema extrawindSpeed, extrawindDir, >>>>>>>>>>>>>>>> lightning_distance15, lightning_strike_count15 and extraTemp, >>>>>>>>>>>>>>>> batteryStatus, extraHumid 9 - 16. >>>>>>>>>>>>>>>> Had a 3rd 5n1 but a hail storm took out 2 5n1s, had to >>>>>>>>>>>>>>>> combine them to get 1 working 5n1. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Saturday, February 26, 2022 at 2:51:21 AM UTC-6 >>>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Would it be possible to record data from two or more full >>>>>>>>>>>>>>>>> sensor arrays (including wind and rain) in one weewx >>>>>>>>>>>>>>>>> instance? Or record >>>>>>>>>>>>>>>>> the data in multiple weewx instances with only one SDR-stick? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I know multiple SDR sticks to multiple weewx instances is >>>>>>>>>>>>>>>>> possible, but how could it be done with just one stick? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I already achieved to get the temperature from a second >>>>>>>>>>>>>>>>> sensor with the extraTempSensor value in the sensor map, but >>>>>>>>>>>>>>>>> i guess this >>>>>>>>>>>>>>>>> wouldn't work for wind and rain? It seems like it would need >>>>>>>>>>>>>>>>> basically only >>>>>>>>>>>>>>>>> an adaption to the schema and database, but to edit these >>>>>>>>>>>>>>>>> seems a bit >>>>>>>>>>>>>>>>> complex for me, has anyone ever done this? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/db3dab70-ffa9-412d-8d8b-1ddddd8dbddcn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/db3dab70-ffa9-412d-8d8b-1ddddd8dbddcn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/be5ee7d9-b89e-4187-b218-9f1918ab22adn%40googlegroups.com.
