Now that it is raining , i noticed that rain rate and max rain rate have 0.0 value
That's all for now..... :p ......I hope that i didnt inconvenience you On Monday, March 7, 2022 at 9:54:38 PM UTC+2 Stefanos Kalaitzis wrote: > On Monday, March 7, 2022 at 9:47:43 PM UTC+2 Stefanos Kalaitzis wrote: > >> Hi Gary...I did what you said... >> >> 1. I upgraded from 4.2.0 to 4.5.1 with weewx-wd plugin (everything fine) >> 2. I uninstalled the weewx-wd and installed the saratoga (seems that the >> dew point is correct now and i will leave it to see if the time of max-min >> temp are updated ) >> Issues that are remaining are >> 1. the avg_speed gets higher values than the gust_speed *sometimes* (Its >> ok for me ) >> 2. path of clientraraw.txt - always is saved to public_html (i send >> clientraw files with a second ftp report so i want to have them in >> public_html/WD folder) (Its ok - i made a python script to send >> clientraw.txt alone) >> >> You can check now better and let me know if i miss something >> Thanks again for your support >> >> On Monday, March 7, 2022 at 7:39:33 PM UTC+2 Stefanos Kalaitzis wrote: >> >>> Also i didnt mentioned that the issue is maybe the correspondence with >>> the template fields and not the client raw file itself >>> >>> >>> On Monday, March 7, 2022 at 11:25:17 AM UTC+2 Stefanos Kalaitzis wrote: >>> >>>> Hi Gary... I am imprsessed.... How do you find me...?? :p >>>> Yes thats my site (https://tagarades-weather.epizy.com/WD) but i made >>>> it to test things before i upload my data to a weather provider >>>> https://northmeteo.gr/weather_stations/tagarades/index.php?lang=en . >>>> For the main site i am using the belchertown skin ( is without the /WD). >>>> I >>>> am using now the 4.2.0 version with weewx-wd but i kept the clientraw file >>>> of weewx saratoga... >>>> Few things that i noticed in weewx -saratoga ... >>>> 1. I cant change path of clientraraw.txt (always is saved to >>>> puplic_html and i want to public_html/WD) even if i edit the rtcr.py >>>> 2. The dewpoint gets value 0 (i attached a screen shot when i made >>>> again the upgrade) >>>> 3. When i made a split with python to clinentraw.txt to data[174] for >>>> example i get 0 value >>>> 4. Sometimes not always the avg_speed gets bigger values than the >>>> gust_speed. >>>> >>>> Probably when you saw my clientraw.txt that is correct was from the >>>> weewx-wd and not from Saratoga >>>> >>>> Anyway , thank you for your time and for your support >>>> Maybe i did something wrong but i didnt touch anything when i upgrade >>>> to 4.7.0 . I use the sdr driver . After i saw the incorrect values i tried >>>> to change the time format (only that) >>>> >>>> p.s the saratoga clientraw was from yesterday (compared with the -wd i >>>> see that after station location have different values, those with solar >>>> radiation percent i think) >>>> >>>> >>>> >>>> >>>> On Monday, March 7, 2022 at 5:02:26 AM UTC+2 gjr80 wrote: >>>> >>>>> I did some debugging of the WeeWX-Saratoga service that generates >>>>> clientraw.txt. My test environment running the simulator shows the >>>>> WeeWX-Saratoga clientraw.txt service is working correctly. The outTemp >>>>> loop cache was being correctly seeded from the daily summaries at startup >>>>> and max/min and associated time correctly updated on arrival of loop >>>>> packets. dewpoint was also being correctly calculated. I also took >>>>> another look at my live site and day max/min outTemp and associated >>>>> times are correct; I suspect I was looking at old data this morning. >>>>> >>>>> I am guessing this is your site - https://tagarades-weather.epizy.com >>>>> ? I found a WeeWX-Saratoga generated clientraw.txt at this address - >>>>> https://tagarades-weather.epizy.com/clientraw.txt - the timestamp is >>>>> 1825 on 6 March. Unfortunately your site graphs have moved on to 7 March >>>>> so >>>>> I cannot correlate the day max/min temps and times as they would have >>>>> been >>>>> at 1825 on 6 March. However, your NOAA format reports indicate the >>>>> maximum >>>>> temperature on 6 March was 8.5C at 1637 - this agrees with the data in >>>>> clientraw.txt (fields 46 and 174 respectively). According to the NOAA >>>>> reports the day min outTemp occurred after 1825 so the NOAA format >>>>> report data cannot be used to verify the clientraw.txt min outTemp >>>>> and time as it would have been at 1825. Looking at your weekly plot >>>>> though >>>>> I see a minimum outTemp before 1825 of 5.5C at 0737 and 0837. The >>>>> 1825 clientraw.txt has minimum outTemp of 5.2 at 0652. Given the >>>>> weekly plot only shows data points every hour we can't really draw any >>>>> conclusion from this other than the clientraw.txt min outTemp is not >>>>> obviously wrong. dewpoint in the 1825 clientraw.txt is 0.0 and >>>>> looking at your week plot you had not dewpoint data from (around) 1537 to >>>>> 1837, the WeeWX-Saratoga clientraw.txt service substitutes 0.0 if a >>>>> temperature based observation does not exist (it must output something >>>>> otherwise the clientraw.txt format will be corrupted) so it is quite >>>>> possible the clientraw.txt dewpoint value of 0.0 was the expected >>>>> result at the time. >>>>> >>>>> The upshot of this analysis of your site is that I cannot find any >>>>> obvious issues with the clientraw.txt data. One thing you may >>>>> consider doing is upgrade to WeeWX v4.5.1. This would allow WeeWX-WD to >>>>> continue to operate without error (it is changes introduced in v4.6.0 >>>>> that >>>>> breaks WeeWX-WD) and it would also allow you to re-install WeeWX-Saratoga >>>>> (it requires v4.5.0 or later) to allow proper troubleshooting of the >>>>> clientraw.txt issue. >>>>> >>>>> Gary >>>>> >>>>> On Monday, 7 March 2022 at 07:48:44 UTC+10 gjr80 wrote: >>>>> >>>>>> clientraw.txt is indeed a fixed format, space delimited file that >>>>>> should have the same observation/stat in the same location irrespective >>>>>> of >>>>>> source. If dewpoint and time of max/min outside (?) temperature is >>>>>> not correct then that is a bug and it should be fixed. I have just >>>>>> looked >>>>>> at my own WeeWX-Saratoga generated clientraw.txt and I note that the >>>>>> time of max outside temperature is incorrect but time of min outside >>>>>> temperature is correct. dewpoint is also correct. >>>>>> >>>>>> I am more than happy to deal with bugs in WeeWX-Saratoga but WeeWX-WD >>>>>> has reached end of life and won't be updated. Can you give me some more >>>>>> information on the errors you are seeing? dewpoint, is it obviously >>>>>> wrong, in F instead of C, close but not quite or not updating? Are both >>>>>> time of max/min outside temperature wrong or just time of max? What >>>>>> station >>>>>> and driver are you using? Is your site publicly accessible? Ideally it >>>>>> would be good to be able to see the erroneous clientraw.txt >>>>>> alongside your current (correct) site but I guess you have probably >>>>>> uninstalled WeeWX-Saratoga. >>>>>> >>>>>> Gary >>>>>> >>>>>> On Monday, 7 March 2022 at 03:11:45 UTC+10 [email protected] >>>>>> wrote: >>>>>> >>>>>>> Thanks Tom... Weewx -wd doesnt run in 4.7.0 ... I checked all the >>>>>>> necessary conf files and the result is the same . >>>>>>> Also tried the weewx -saratoga that runs without problem but the >>>>>>> clientraw.txt that generated is a little bit different than the >>>>>>> weewx-wd as >>>>>>> a result the saratoga template gets different values in the appropriate >>>>>>> fields and i have to modify the dashboard script file and i dont have >>>>>>> much >>>>>>> time :p >>>>>>> I thought that clientraw gets standard values in standard place >>>>>>> Example >>>>>>> Temp, wind ,baro, and rain are correct but dew point is wrong and >>>>>>> time of max-min temp is not updated >>>>>>> >>>>>>> I can live with the 4.2.0 ... :) >>>>>>> >>>>>>> On Saturday, March 5, 2022 at 9:57:59 PM UTC+2 [email protected] >>>>>>> wrote: >>>>>>> >>>>>>>> See if this thread helps: >>>>>>>> https://groups.google.com/g/weewx-user/c/rnLNpNoX0U0/m/stFp0t_MEAAJ >>>>>>>> >>>>>>>> On Sat, Mar 5, 2022 at 8:41 AM Stefanos Kalaitzis < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Hi everyone...I am running weewx with sdr driver I decided to >>>>>>>>> update from weewx 4.2.0 to 4.7.0 and i have several errors in >>>>>>>>> Clientraw >>>>>>>>> skin....It doesnt generate the clientraw.txt but all the others >>>>>>>>> clientrawhour,-daily - extra are generated.In the 4.2.0 version >>>>>>>>> evrything >>>>>>>>> was flawless .I also made a clean install of weewx 4.7.0 and the >>>>>>>>> errors are >>>>>>>>> the same ... I kept the log from 4.7.0 and i downgraded again to the >>>>>>>>> old >>>>>>>>> version. If someone knows whats going on i would appreciate it. >>>>>>>>> I didnt make any change to weewx.conf after the update . >>>>>>>>> >>>>>>>>> Thank you in advanced >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/b200d823-4ee6-4e64-8164-b531a227d54bn%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/b200d823-4ee6-4e64-8164-b531a227d54bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/75e196cb-d402-4c02-ba5b-351cf9d9dc40n%40googlegroups.com.
