Hi Gary ... Time of min-max temp ...ok ... It wasnt the clientraw as you said but i reinstall the weewx plugin for Sarratoga template and all good Now i have also max rain/rate value correct but i dont know about rain/rate because it stop raining Wind values are mystery.... I edited the ajaxweewx js file and i put [1] for avg_speed instead of [140] and [2] for gust_speed instead of [1]
On Tuesday, March 8, 2022 at 8:59:33 AM UTC+2 Stefanos Kalaitzis wrote: > Hi Gary ... Thanks !! > > Also Time of min-max temp still not updated > > On Tuesday, March 8, 2022 at 12:31:21 AM UTC+2 gjr80 wrote: > >> > How do you find me...?? >> That was not too difficult, your user name sounded very Greek so I looked >> at the WeeWX user map <http://weewx.com/stations.html> and there are not >> that many stations in Greece. I knew you were using SDR and there are not >> that many SDR stations around. Finding clientraw.txt was the clincher. >> >> > 1. I cant change path of clientrraw.txt (always is saved to puplic_html >> and i want to public_html/WD) even if i edit the rtcr.py >> I still need to finish off documenting the WeeWX-Saratoga options. You >> can change the location that clientraw.txt is saved using the rtcr_patth >> setting under [WeewxSaratoga] [[RealtimeClientraw]] in weewx.conf, eg: >> >> [WeewxSaratoga] >> .... >> [[RealtimeClientraw]] >> # Path to clientraw.txt. Can be an absolute or relative path. >> Relative >> # paths are relative to HTML_ROOT. Optional, default setting is >> to use >> # HTML_ROOT. >> rtcr_path = /home/weewx/public_html >> >> Until I finish documenting the options the best source of >> RealtimeClientraw (the service that WeeWX-Saratoga uses to generate >> clientraw.txt) is the comments at the top of rtcr.py. I don't recommend >> editing the rtcr.py code to force things, it is far to easy to break >> something else, it is a complex service. >> >> > 2. The dewpoint gets value 0 (i attached a screen shot when i made >> again the upgrade) >> I have a suspicion this could be related to the gaps I saw in some of >> your plots, depending on your system dewpoint may be a calculated value >> and if any of the prerequisites for its calculation are missing it will not >> be calculated and clientraw.txt will then display it as 0.0. >> >> > 3. When i made a split with python to clientraw.txt to data[174] for >> example i get 0 value >> It is possible there could be some corner cases that are causing a field >> to be omitted when clientraw.txt is generated, I would like to think I have >> hardened the code to prevent this but it is possible. If one field is >> omitted that shuffles every later field along and they become out of place. >> If you use a clientraw.txt parser like the one at Saratoga Weather >> <https://saratoga-weather.org/wdparser.php> it is usually pretty obvious >> where the omission is. We can work through this one now that you have >> installed v4.5.1 and WeeWX-Saratoga. >> >> > 4. Sometimes not always the avg_speed gets bigger values than the >> gust_speed. >> This should not happen, again can work through. >> >> > Probably when you saw my clientraw.txt that is correct was from the >> weewx-wd and not from Saratoga >> No, was definitely from WeeWX-Saratoga, if you look at the end of the >> file you will see something like: >> >> 102.9 16:37 06:52 68 !!WS0.3.3!! >> >> The 'WS0.3.3' indicates WeeWX-Saratoga v0.3.3, WeatherDisplay and >> WeeWX-WD generated clientraw.txt files terminate differently. >> >> > Now that it is raining , i noticed that rain rate and max rain rate >> have 0.0 value >> OK. I will work through this and the other issues you have raised. >> >> > That's all for now..... :p ......I hope that i didnt inconvenience you >> Not at all, it's can be difficult to write something like >> RealtimeClientraw and cover all the corner cases so you have to rely on >> people finding bugs. >> >> Gary >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/00c8de57-6e88-4f9c-97a9-7b5b1c991e3en%40googlegroups.com.
