Ah, I see why the noise is there... May 11 12:48:27 raspi-server-misc weewx[13000] ERROR weewx.engine: The archive interval in the configuration file (300) does not match the station hardware interval (60).
May 11 12:48:27 raspi-server-misc weewx[13000] INFO weewx.engine: Using archive interval of 60 seconds (specified by hardware) This is something the MB can set on the console (Envoy) so I've changed this to 5 mins. The output from wee_device --info looks correct to me (now)... other than the station type reporting as Vantage Pro 2.... On Wednesday, May 11, 2022 at 9:37:43 AM UTC-7 Ryan Stasel wrote: > To be clear, I have "model_type" set to 2 rather than 1. But neither are > the Vue, so I'm not sure if that matters or not. If I just comment that > line out, will it try to figure it out on it's own? There's no > documentation on that parameter in the docs that I can find. > > On Wednesday, May 11, 2022 at 9:33:38 AM UTC-7 Ryan Stasel wrote: > >> Thanks Thomas. I was looking through the Vantage driver, and was curious >> if there was a way to just "force" Vue. Saw something about setting the >> value to 17, but not sure that is accurate. Does it read that value out of >> the Envoy EEPROM? I can inquire with the MB developer and see if they have >> any thoughts. Since you tell the MB what station you have, seems like it >> should be able to report that back to Weewx. >> >> One thing I do notice is there's a significant amount of "noise" in the >> graphs since switching over. If you take a look here: >> https://www.staze.org/weewx/ before about 2pm PDT when it'll roll off >> the graphs... maybe that's just the expected behavior with the LOOP data. >> >> Also, random, I set it to use both LOOP and LOOP2, and there's a note >> about setting to hardware for the values weewx would otherwise calculate. >> Those are currently set to "prefer_hardware". I assume that means it's >> still going to calculate on every packet that doesn't contain that data, so >> I should hard set to "hardware"? Maybe that'll remove the noise? Or is this >> also an MB side effect? >> >> On Tuesday, May 10, 2022 at 6:18:38 PM UTC-7 [email protected] wrote: >> >>> 1. I'm afraid I can't offer an opinion on this, because your arrangement >>> is so non-standard. Normally, the station type is read out of EEPROM. >>> 2. After 30 days, the logic in the skin gives up and figures the sensors >>> are gone. So, you can either wait that long, or pare down the list of >>> sensors in skin.conf. Look under stanza [DisplayOptions]. >>> >>> On Tue, May 10, 2022 at 12:52 PM Ryan Stasel <[email protected]> wrote: >>> >>>> Hi All, >>>> >>>> I just flipped drivers to the Vantage driver (having previously used >>>> the ambientweatherapi driver). I have two questions. >>>> >>>> 1. My page now thinks I have a Vantage Pro 2 rather than a Vue. I'm >>>> interfacing over "ethernet" to a Meteobridge Nano SD in an Envoy. Is there >>>> a different value I should put in for "model_type" to reflect Vantage Vue? >>>> >>>> 2. The ambientweatherapi driver reported battery level, and the Vantage >>>> one does not. But now I just have two "Unknown" values where those go. I >>>> assume just clear out those DB entires so the template doesn't render >>>> them? >>>> Will have to figure out what field it used for this so I can null it >>>> out... >>>> >>>> Thanks! >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/cb9428de-0583-4b64-bc94-a86a65702922n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/cb9428de-0583-4b64-bc94-a86a65702922n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/6ef8ba94-58b4-45f3-898b-0627a2a4596dn%40googlegroups.com.
