to get some more related information of your station - including hints
for latest firmware etc., visit
https://www.wxforum.net/index.php?topic=40730.0
(free registration required in order to see the (important !!) pictures)
upgrade to device firmware 1.8.1 recommended !! - WiFi firmware should
be 1.6.4 - if not, connect via WS View Plus app ...😎
Am 03.08.2022 um 13:02 schrieb Martin Davies:
Many thanks, Rainer. I think I understand. I was confused because the
display/console says it is 'Model HP2553AE' running Firmware:
Pro_v1.7.6 and I thought this supported the new API/driver. I didn't
realise that it is only the Ecowitt 'displayless consoles/gateways'
that support the newer API/driver.
Thank you for your advice. I followed your suggestion and with Matthew
Wall's intercept driver
(https://github.com/matthewwall/weewx-interceptor ) I have got the
Ecowite HP2553 to communicate with WeeWx.
On Tuesday, August 2, 2022 at 7:48:18 PM UTC+1 [email protected]
wrote:
you asked for the HP2553 station with the HP2551 console.
For the GW1000/GW1100/GW2000 displayless consoles/gateways and the
WN19x0 console , weewx can directly communicate via their API
using the Ecowitt Gateway driver (new name) or GW1000 API driver
(old name).
The HP2551/HP350x, WS2320E/ WS2910 consoles don't have this API,
hence the use of the interceptor driver.
Am 02.08.2022 um 15:12 schrieb Martin Davies:
Hi Rainer. Many thanks for your helpful response. I will follow
your suggestions and let you know how I get on. I did discover
details of a service/driver at
https://github.com/gjr80/weewx-gw1000/wiki which should work with
the Ecowitt LAN/WIFI gateway but I couldn't get it to work.
Reading the detail, it looks like this is a different approach
from the one you suggest above?
On Monday, August 1, 2022 at 11:45:12 PM UTC+1
[email protected] wrote:
You can use the weewx interceptor driver - station_type =
ecowitt-client and have your HP2551 console post via custom
server to the server where your weewx runs. path must contain
a "/" (without ""), server/IP is IP address only (no http://
in front) - port has to be the same where the interceptor
driver listens to - e.g. 8000. (port = 80 won't work as your
web server usually already uses this port)
If you use more than the standard sensors, you will an
expanded version of the Ecowitt driver some forum members
have developed based on Matthew Wall's original version which
considers the whole Ecowitt sensor "fleet".
A mere HP2553 (WS80 + WH40 outdoor sensors) should be covered
by the original M.Wall interceptor driver from GitHub.
On 01.08.2022 15:07, Martin Davies wrote:
Hi - I was looking for some guidance on how to send data
from an Ecowitt HP2553 weather station to WeeWx. Looking at
the WeeWx documentation I can't find any specific guidance.
I believe that there isn't a standard WeeWx configuration
for HP2553? I understand you may need to configure a custom
interface using 'HTTP Post' etc? Many thanks. --
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d05b662b-c2e1-474a-83d1-fd3d28707cd3n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/d05b662b-c2e1-474a-83d1-fd3d28707cd3n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/0145089c-4eb6-4bb5-9496-978a902660acn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/0145089c-4eb6-4bb5-9496-978a902660acn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/41df0de8-ebe6-4873-b835-663341d96446n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/41df0de8-ebe6-4873-b835-663341d96446n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/27e31214-978a-4ee4-b010-e3dad910c79e%40gmail.com.
