Many thanks, Rainer! Will do as you suggest. On Wednesday, August 3, 2022 at 12:06:16 PM UTC+1 [email protected] wrote:
> to get some more related information of your station - including hints for > latest firmware etc., visit > https://www.wxforum.net/index.php?topic=40730.0 > (free registration required in order to see the (important !!) pictures) > > upgrade to device firmware 1.8.1 recommended !! - WiFi firmware should be > 1.6.4 - if not, connect via WS View Plus app ...😎 > Am 03.08.2022 um 13:02 schrieb Martin Davies: > > Many thanks, Rainer. I think I understand. I was confused because the > display/console says it is 'Model HP2553AE' running Firmware: Pro_v1.7.6 > and I thought this supported the new API/driver. I didn't realise that it > is only the Ecowitt 'displayless consoles/gateways' that support the newer > API/driver. > > Thank you for your advice. I followed your suggestion and with Matthew > Wall's intercept driver (https://github.com/matthewwall/weewx-interceptor > ) I have got the Ecowite HP2553 to communicate with WeeWx. > > On Tuesday, August 2, 2022 at 7:48:18 PM UTC+1 [email protected] > wrote: > >> you asked for the HP2553 station with the HP2551 console. >> For the GW1000/GW1100/GW2000 displayless consoles/gateways and the WN19x0 >> console , weewx can directly communicate via their API using the Ecowitt >> Gateway driver (new name) or GW1000 API driver (old name). >> The HP2551/HP350x, WS2320E/ WS2910 consoles don't have this API, hence >> the use of the interceptor driver. >> Am 02.08.2022 um 15:12 schrieb Martin Davies: >> >> Hi Rainer. Many thanks for your helpful response. I will follow your >> suggestions and let you know how I get on. I did discover details of a >> service/driver at https://github.com/gjr80/weewx-gw1000/wiki which >> should work with the Ecowitt LAN/WIFI gateway but I couldn't get it to >> work. Reading the detail, it looks like this is a different approach from >> the one you suggest above? >> >> On Monday, August 1, 2022 at 11:45:12 PM UTC+1 [email protected] >> wrote: >> >>> You can use the weewx interceptor driver - station_type = ecowitt-client >>> and have your HP2551 console post via custom server to the server where >>> your weewx runs. path must contain a "/" (without ""), server/IP is IP >>> address only (no http:// in front) - port has to be the same where the >>> interceptor driver listens to - e.g. 8000. (port = 80 won't work as your >>> web server usually already uses this port) >>> >>> If you use more than the standard sensors, you will an expanded version >>> of the Ecowitt driver some forum members have developed based on Matthew >>> Wall's original version which considers the whole Ecowitt sensor "fleet". >>> >>> A mere HP2553 (WS80 + WH40 outdoor sensors) should be covered by the >>> original M.Wall interceptor driver from GitHub. >>> >>> On 01.08.2022 15:07, Martin Davies wrote: >>> >>> Hi - I was looking for some guidance on how to send data from an Ecowitt >>> HP2553 weather station to WeeWx. Looking at the WeeWx documentation I can't >>> find any specific guidance. I believe that there isn't a standard WeeWx >>> configuration for HP2553? I understand you may need to configure a custom >>> interface using 'HTTP Post' etc? Many thanks. -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/d05b662b-c2e1-474a-83d1-fd3d28707cd3n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/d05b662b-c2e1-474a-83d1-fd3d28707cd3n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/0145089c-4eb6-4bb5-9496-978a902660acn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/0145089c-4eb6-4bb5-9496-978a902660acn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/41df0de8-ebe6-4873-b835-663341d96446n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/41df0de8-ebe6-4873-b835-663341d96446n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4301d3b8-4db2-482f-b1af-18547677d921n%40googlegroups.com.
