As always, we'd need to see your logs with debug=1 and after you reset weewx.
Is it possible that you edited a different weewx.conf than the one that is actually running ? Are you running under Docker perhaps ? On Sunday, September 4, 2022 at 3:56:31 PM UTC-7 [email protected] wrote: > Weewx installed and running on Rpi4 using Vantage Pro2 station and Envoy > with USB data logger. The HTML web report generated ALWAYS reports station > elevation as zero, regardless of entry in weewx.conf. This then causes an > incorrect reading for the barometer which is then outside the range set in > weewx.conf thus causing error reports in the log. I can change the range > for the barometer to alieviate the log errors but still the elevation is > reported as 0. I have changed the conf file multiple times with different > numbers, foot or meter, nothing seems to matter. Web report is always > reporting zero elevation. Elevation is correctly set and reported in the > Vantage console. Also note, I have had this running on multiple operating > systems including MAC, Linux Ubuntu and Raspberry...all web reports report > station elevation as zero. > > How should I go about resolving this issue? Thanks in advance. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0096256e-b906-4ccb-99c3-797511b8816bn%40googlegroups.com.
