Hello, A year ago I installed WS 6in1 for Bresser 5-in1 (thread for reference https://groups.google.com/u/1/g/weewx-user/c/VPrfgr5uZq4/m/pNE9U0RRAQAJ), which was running without problems until June 13 when it stopped sending reports.
When I went at the site I noticed the outside batteries had to be replaced, so I did that, but it didn't help, then I've noticed weewx was failing to start with an exit code something along the lines of "device not found". Frankly not having a clue what to do since I hadn't done any changes or modifications in the past year since I made it work I decided swapping the USB cable, but I've noticed it was detecting the station: kernel: usb 1-1.3: new full-speed USB device number 9 using dwc_otg kernel: usb 1-1.3: New USB device found, idVendor=1941, idProduct=8021, bcdDevice= 0.00 kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kernel: usb 1-1.3: Product: CCLEL C8488 kernel: usb 1-1.3: Manufacturer: Silicon Laboratories Inc. kernel: usb 1-1.3: SerialNumber: CCLEL c8488 kernel: hid-generic 0003:1941:8021.0004: hiddev96,hidraw0: USB HID v1.11 Device [Silicon Laboratories Inc. CCLEL C8488] on usb-20980000.usb-1.3/input0 Yet, weewx was failing with No handlers could be found for logger "user.ws6in1": Jul 10 17:05:03 alarmpi weewx[415]: engine: Finished loading service weewx.engine.StdReport Jul 10 17:05:03 alarmpi weewx[415]: engine: Starting up weewx version 3.7.1 Jul 10 17:05:03 alarmpi weewx[415]: engine: Station does not support reading the time Jul 10 17:05:03 alarmpi weewx[415]: manager: Daily summary version is 4.0 Jul 10 17:05:03 alarmpi weewx[415]: manager: Daily summary version is 4.0 Jul 10 17:05:03 alarmpi weewx[415]: manager: Daily summary version is 4.0 Jul 10 17:05:03 alarmpi weewx[415]: manager: Daily summary version is 4.0 Jul 10 17:05:10 alarmpi weewxd[415]: No handlers could be found for logger "user.ws6in1" Jul 10 17:05:52 alarmpi weewx[415]: engine: Main loop exiting. Shutting engine down. Jul 10 17:05:52 alarmpi weewx[415]: restx: Shut down WeatherCloud thread. Again, not having a clue what that could possibly mean or what to do I decided to play with the console buttons: pressing TIME SYNC; RESET; DATA - but weewx kept shutting down with *No handlers could be found for logger "user.ws6in1".* Maybe it's worth noting that USB DATA kept blinking on the screen during all this time (at least I've notied it after the RESET and all that). I've decided to leave the premises and much to my surprise I saw the station had started sending reports a couple of hours later: Jul 10 19:55:30 alarmpi weewx[215]: manager: Daily summary version is 4.0 Jul 10 19:55:30 alarmpi weewx[215]: manager: Daily summary version is 4.0 Jul 10 19:55:31 alarmpi weewx[215]: manager: Daily summary version is 4.0 Jul 10 19:55:31 alarmpi weewx[215]: manager: Daily summary version is 4.0 Jul 10 19:56:40 alarmpi weewxd[215]: No handlers could be found for logger "user.ws6in1" Jul 10 20:04:49 alarmpi weewx[215]: engine: Starting main packet loop. Jul 10 20:05:43 alarmpi weewxd[215]: LOOP: 2023-07-10 20:04:51 EEST (1689008691) altimeter: 1023.27580096, appTemp: 22.2702851465, barometer: 1013.0, cloud> Jul 10 20:05:43 alarmpi weewxd[215]: LOOP: 2023-07-10 20:04:56 EEST (1689008696) altimeter: 1023.27580096, appTemp: 22.2702851465, barometer: 1013.0, cloud> Jul 10 20:05:43 alarmpi weewxd[215]: LOOP: 2023-07-10 20:05:08 EEST (1689008708) altimeter: 1023.27580096, appTemp: 22.2702851465, barometer: 1013.0, cloud> Jul 10 20:15:20 alarmpi weewx[215]: manager: Added record 2023-07-10 20:15:00 EEST (1689009300) to database 'weewx.sdb' Notice there's still there the No handlers could be found for logger "user.ws6in1" but now it works! So after this rather long intro two questions: 1. What does that message mean and is it something I should worry/care about? (No handlers could be found for logger "user.ws6in1) 2. Since the station has a configurable data log, if communication between it and weewx/ws6in1 is interrupted for a significant time period, let's say 5 days, does weewx/ws6in1 catch up/fetch the missing data? [image: Screenshot from 2023-07-11 11-41-07.png] -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/caf2eaa9-5b40-4a37-851a-2498b09ddc2dn%40googlegroups.com.
