Excuse me Who is "Ho Lee Fooks"? суббота, 28 сентября 2024 г. в 17:19:38 UTC+3, Tom Keffer:
> I'm getting confused here. Is "Ho Lee Fooks" (seriously?) and Andrei the > same person? > > On Fri, Sep 27, 2024 at 11:02 PM ANDREI ROZWADOWSKI < > [email protected]> wrote: > >> I checked RaspPi USB ports: >> >> pi@raspberrypi:~ $ sudo lsusb >> Bus 001 Device 007: ID 10c4:ea61 Silicon Labs CP210x UART Bridge >> Bus 001 Device 006: ID 03f0:304a HP, Inc Slim Keyboard >> Bus 001 Device 005: ID 03f0:134a HP, Inc Optical Mouse >> Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS >> 802.11n WLAN Adapter >> Bus 001 Device 003: ID 0424:ec00 Microchip Technology, Inc. (formerly >> SMSC) SMSC9512/9514 Fast Ethernet Adapter >> Bus 001 Device 002: ID 0424:9514 Microchip Technology, Inc. (formerly >> SMSC) SMC9514 Hub >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> >> After I opened weewx.conf: >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >> type = serial >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 1.2.3.4 >> >> I don't use any USB-RS232 connector. So it seems to me that "ttyUSB0" is >> correctly. >> >> Also I've got log: >> pi@raspberrypi:~ $ journalctl -n 100 >> Sep 28 08:40:54 raspberrypi systemd[892]: Starting >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect... >> Sep 28 08:40:54 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Control process exited, code=exited, status=1/FAILURE >> Sep 28 08:40:54 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Failed with result 'exit-code'. >> Sep 28 08:40:54 raspberrypi systemd[892]: Failed to start >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co> >> Sep 28 08:40:59 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Scheduled restart job, restart counter is at 24483. >> Sep 28 08:40:59 raspberrypi systemd[892]: Stopped >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect. >> Sep 28 08:40:59 raspberrypi systemd[892]: Starting >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect... >> Sep 28 08:40:59 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Control process exited, code=exited, status=1/FAILURE >> Sep 28 08:40:59 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Failed with result 'exit-code'. >> Sep 28 08:40:59 raspberrypi systemd[892]: Failed to start >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co> >> Sep 28 08:41:04 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Scheduled restart job, restart counter is at 24484. >> Sep 28 08:41:04 raspberrypi systemd[892]: Stopped >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect. >> Sep 28 08:41:04 raspberrypi systemd[892]: Starting >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect... >> Sep 28 08:41:04 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Control process exited, code=exited, status=1/FAILURE >> Sep 28 08:41:04 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Failed with result 'exit-code'. >> Sep 28 08:41:04 raspberrypi systemd[892]: Failed to start >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co> >> Sep 28 08:41:09 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Scheduled restart job, restart counter is at 24485. >> Sep 28 08:41:09 raspberrypi systemd[892]: Stopped >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect. >> Sep 28 08:41:09 raspberrypi systemd[892]: Starting >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect... >> Sep 28 08:41:09 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Control process exited, code=exited, status=1/FAILURE >> Sep 28 08:41:09 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Failed with result 'exit-code'. >> Sep 28 08:41:09 raspberrypi systemd[892]: Failed to start >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co> >> Sep 28 08:41:15 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Scheduled restart job, restart counter is at 24486. >> Sep 28 08:41:15 raspberrypi systemd[892]: Stopped >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect. >> Sep 28 08:41:15 raspberrypi systemd[892]: Starting >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect... >> Sep 28 08:41:15 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Control process exited, code=exited, status=1/FAILURE >> Sep 28 08:41:15 raspberrypi systemd[892]: rpi-connect-wayvnc.service: >> Failed with result 'exit-code'. >> Sep 28 08:41:15 raspberrypi systemd[892]: Failed to start >> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co> >> >> Unfortunately I don't receive data from Vantage Pro2 >> пятница, 27 сентября 2024 г. в 13:30:54 UTC+3, Ho Lee Fooks: >> >>> Currently using Pi OS lite 64-bit Debian Bookworm port with a pip >>> install after a SD card failure. >>> >>> On Fri, Sep 27, 2024, 02:27 vince <[email protected]> wrote: >>> >>>> Again - we need to see your logfile please. Also need to see your >>>> [Vantage] section from weewx.conf. As Tom said, your logfile seems to >>>> indicate that you are trying to connect to a port that does not exist on >>>> your system. >>>> >>>> Mine on a raspberry pi looks like this for a VP2 connected to the pi4. >>>> >>>> [Vantage] >>>> # This section is for the Davis Vantage series of weather stations. >>>> >>>> # Connection type: serial or ethernet >>>> # serial (the classic VantagePro) >>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>>> type = serial >>>> port = */dev/ttyUSB0* >>>> >>>> You might want to run the "lsusb" and "dmesg" command to see what >>>> devices are on your USB bus. >>>> >>>> pi@pi4:~$ lsusb >>>> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >>>> *Bus 001 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 >>>> Serial Port / Mobile Action MA-8910P* >>>> Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub >>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> >>>> pi@pi4:~$ dmesg|grep USB >>>> [ 1.494727] xhci_hcd 0000:01:00.0: new USB bus registered, assigned >>>> bus number 1 >>>> [ 1.496256] xhci_hcd 0000:01:00.0: new USB bus registered, assigned >>>> bus number 2 >>>> [ 1.496291] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed >>>> [ 1.496652] usb usb1: New USB device found, idVendor=1d6b, >>>> idProduct=0002, bcdDevice= 6.01 >>>> [ 1.496688] usb usb1: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 1.497522] hub 1-0:1.0: USB hub found >>>> [ 1.498604] usb usb2: New USB device found, idVendor=1d6b, >>>> idProduct=0003, bcdDevice= 6.01 >>>> [ 1.498640] usb usb2: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 1.499393] hub 2-0:1.0: USB hub found >>>> [ 1.513632] usbhid: USB HID core driver >>>> [ 1.751480] usb 1-1: new high-speed USB device number 2 using >>>> xhci_hcd >>>> [ 1.902082] usb 1-1: New USB device found, idVendor=2109, >>>> idProduct=3431, bcdDevice= 4.21 >>>> [ 1.902145] usb 1-1: New USB device strings: Mfr=0, Product=1, >>>> SerialNumber=0 >>>> [ 1.902172] usb 1-1: Product: USB2.0 Hub >>>> [ 1.904186] hub 1-1:1.0: USB hub found >>>> [ 2.199479] usb 1-1.2: new full-speed USB device number 3 using >>>> xhci_hcd >>>> [ 2.303884] usb 1-1.2: New USB device found, idVendor=067b, >>>> idProduct=2303, bcdDevice= 3.00 >>>> [ 2.303945] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 2.303973] usb 1-1.2: Product: USB-Serial Controller >>>> [ 7.708729] usbserial: USB Serial support registered for generic >>>> [ 7.735802] usbserial: USB Serial support registered for pl2303 >>>> *[ 7.801504] usb 1-1.2: pl2303 converter now attached to ttyUSB0* >>>> >>>> My VP2 is connected by a serial2usb connector to the pi, so it shows up >>>> as the only device attached to the pi as reported by lsusb, and the dmesg >>>> command shows that it is allocated /dev/ttyUSB0, which is what matches my >>>> setup. >>>> >>>> On Thursday, September 26, 2024 at 9:51:36 PM UTC-7 ANDREI ROZWADOWSKI >>>> wrote: >>>> >>>>> Thanks for the tip. >>>>> I will also try to reinstall the OS. >>>>> Please tell me, >>>>> Does Weewx support 64-bit OS? >>>>> >>>>> пятница, 27 сентября 2024 г. в 02:07:48 UTC+3, Ho Lee Fooks: >>>>> >>>>>> journalctl -n 100 >>>>>> Shows the last 100 lines. >>>>>> >>>>>> On Thu, Sep 26, 2024, 18:31 Ho Lee Fooks <[email protected]> wrote: >>>>>> >>>>>>> Reinstalling weewx, I wondered where the log was as well. It may be >>>>>>> replaced with a binary log named journal. I found a README that >>>>>>> explains >>>>>>> more. >>>>>>> >>>>>>> On Thu, Sep 26, 2024, 10:59 '[email protected]' via weewx-user < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Maybe your log is elsewhere: >>>>>>>> https://weewx.com/docs/5.1/usersguide/where/ >>>>>>>> >>>>>>>> ANDREI ROZWADOWSKI schrieb am Donnerstag, 26. September 2024 um >>>>>>>> 16:33:55 UTC+2: >>>>>>>> >>>>>>>>> As for link >>>>>>>>> https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user#how-to-get-a-good-useful-log >>>>>>>>> I've got the following results: >>>>>>>>> >>>>>>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog | tee >>>>>>>>> /var/tmp/mylog >>>>>>>>> tail: cannot open '/var/log/syslog' for reading: No such file or >>>>>>>>> directory >>>>>>>>> tail: no files remaining >>>>>>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog >>>>>>>>> tail: cannot open '/var/log/syslog' for reading: No such file or >>>>>>>>> directory >>>>>>>>> tail: no files remaining >>>>>>>>> pi@raspberrypi:~ $ >>>>>>>>> >>>>>>>>> >>>>>>>>> четверг, 26 сентября 2024 г. в 17:29:07 UTC+3, ANDREI ROZWADOWSKI: >>>>>>>>> >>>>>>>>>> Good evening! >>>>>>>>>> Below is the log file for Raspberry Pi 3B (OS Bullseye) >>>>>>>>>> The latest results on the charts (in the folder: /var/www/html/ >>>>>>>>>> www ) which I received are dated 09/25/2024, 06:15:00 PM >>>>>>>>>> >>>>>>>>>> pi@raspberrypi:~ $ sudo journalctl -u weewx >>>>>>>>>> Sep 24 11:52:40 raspberrypi systemd[1]: Started weewx.service - >>>>>>>>>> WeeWX. >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: >>>>>>>>>> Initializing weewxd version 5.1.0 >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Command >>>>>>>>>> line: /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Using >>>>>>>>>> Python: 3.11.2 (main, Aug 26 2024, 07:20:54) [GCC 12.2.0] >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Located >>>>>>>>>> at: /usr/bin/python3 >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: >>>>>>>>>> Platform: Linux-6.6.47+rpt-rpi-v7-armv7l-with-glibc2.36 >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Locale: >>>>>>>>>> 'en_US.UTF-8' >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Entry >>>>>>>>>> path: /usr/share/weewx/weewxd.py >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: >>>>>>>>>> WEEWX_ROOT: /etc/weewx >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Config >>>>>>>>>> file: /etc/weewx/weewx.conf >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: User >>>>>>>>>> module: /etc/weewx/bin/user >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Debug: >>>>>>>>>> 0 >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: User: >>>>>>>>>> weewx >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Group: >>>>>>>>>> weewx >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Groups: >>>>>>>>>> weewx >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO weewx.engine: >>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage) >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: ERROR weewx.engine: >>>>>>>>>> Import of driver failed: [Errno 2] could not open port /dev/tty> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** Traceback (most recent call last): >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/lib/python3/dist-packages/serial/seri> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** self.fd = os.open(self.portstr, os.O_RDWR | os> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** FileNotFoundError: [Errno 2] No such file or direc> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** During handling of the above exception, another ex> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** Traceback (most recent call last): >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/engine.py", line 11> >>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: >>>>>>>>>> **** self.console = loader_function(config_dict, se> >>>>>>>>>> lines 1-28 >>>>>>>>>> среда, 25 сентября 2024 г. в 23:24:13 UTC+3, Tom Keffer: >>>>>>>>>> >>>>>>>>>>> I don't know what you mean by "registration". Do you mean >>>>>>>>>>> station registration so it shows on this map >>>>>>>>>>> <https://www.weewx.com/stations.html>? Or, something else? >>>>>>>>>>> >>>>>>>>>>> In any case, it's almost impossible to diagnose what's happening >>>>>>>>>>> without a log. See the section *How to get a good, useful log >>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user#how-to-get-a-good-useful-log>* >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>>> On Wed, Sep 25, 2024 at 11:12 AM ANDREY <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Good evening! >>>>>>>>>>>> >>>>>>>>>>>> I use meteostation Davis Vantage Pro2 with Raspberry Pi 2B >>>>>>>>>>>> since 2022. >>>>>>>>>>>> Its operation system is Raspbian Buster (because I use AnyDesk >>>>>>>>>>>> for the remote access). >>>>>>>>>>>> Since June 2024, data registration has interrupted. >>>>>>>>>>>> It worked only some hours. >>>>>>>>>>>> I was reinstalling the operating system (Raspbian Buster). >>>>>>>>>>>> I replaced the board on a Raspberry Pi 3B with Raspbian >>>>>>>>>>>> Bullseye. >>>>>>>>>>>> But I see the graphics with results for some hours. >>>>>>>>>>>> After that the registration is stopped. >>>>>>>>>>>> Why? >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/77b03b34-495e-43aa-9f12-f9cfada246cdn%40googlegroups.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/77b03b34-495e-43aa-9f12-f9cfada246cdn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/dd7e77cf-2234-409d-92aa-53fae15de8a4n%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/dd7e77cf-2234-409d-92aa-53fae15de8a4n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/d90ffe5b-057e-4614-8687-ae199a9c7f17n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/d90ffe5b-057e-4614-8687-ae199a9c7f17n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/ac42315c-18a1-410c-9da2-64442d9031c0n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/ac42315c-18a1-410c-9da2-64442d9031c0n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3f549cba-e22b-4678-941a-1e1f7caa495fn%40googlegroups.com.
