I reinstalled RaspOS. Now it's Bookworm ( 32-bit ) .
After that I've installed Weewx.
I use Davis Vantage Pro2 with data-logger
This station is connected to RaspPi via usb cable (direct connection).
I checked folder /var/www/html/weewx/. It's empty.
There isn't the file "index.html".
And I didn't find folder "/dev/vantage"
I agree with vince and Warren Gill that Vantage drivers (/dev/ttyUSB0) is 
not installed correctly.

Also I printed logs:

pi@raspberrypi:~ $ sudo systemctl status weewx
× weewx.service - WeeWX
     Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset: 
enable>
     Active: failed (Result: exit-code) since Sun 2024-09-29 16:06:19 MSK; 
1h 3>
   Duration: 1.229s
       Docs: https://weewx.com/docs
    Process: 2788 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited, 
status=4)
   Main PID: 2788 (code=exited, status=4)
        CPU: 1.148s

Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 seri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL __main__: Unable to load 
dri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL __main__:     **** 
 Exiting.>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Main process exited, 
cod>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Failed with result 
'exit>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Consumed 1.148s CPU 
time.
...skipping...
× weewx.service - WeeWX
     Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset: 
enable>
     Active: failed (Result: exit-code) since Sun 2024-09-29 16:06:19 MSK; 
1h 3>
   Duration: 1.229s
       Docs: https://weewx.com/docs
    Process: 2788 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited, 
status=4)
   Main PID: 2788 (code=exited, status=4)
        CPU: 1.148s

Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 seri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL __main__: Unable to load 
dri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL __main__:     **** 
 Exiting.>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Main process exited, 
cod>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Failed with result 
'exit>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Consumed 1.148s CPU 
time.
~
~
~
~

pi@raspberrypi:~ $ sudo journalctl -u weewx
Sep 29 16:06:18 raspberrypi systemd[1]: Started weewx.service - WeeWX.
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Initializing 
weewxd ve>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Command line: 
/usr/sha>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Using Python: 
3.11.2 (>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Located at:   
/usr/bin>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Platform:     
Linux-6.>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Locale:       
'en_US.U>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Entry path:   
/usr/sha>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: WEEWX_ROOT:   
/etc/wee>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Config file: 
 /etc/wee>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: User module: 
 /etc/wee>
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Debug:        0
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: User:         weewx
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Group:        weewx
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO __main__: Groups:       weewx
Sep 29 16:06:19 raspberrypi weewxd[2788]: INFO weewx.engine: Loading 
station ty>
Sep 29 16:06:19 raspberrypi weewxd[2788]: ERROR weewx.engine: Import of 
driver >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 Trac>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 Perm>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 Duri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 Trac>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
 Fi>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     ****   
   >
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL weewx.engine:     **** 
 seri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL __main__: Unable to load 
dri>
Sep 29 16:06:19 raspberrypi weewxd[2788]: CRITICAL __main__:     **** 
 Exiting.>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Main process exited, 
cod>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Failed with result 
'exit>
Sep 29 16:06:19 raspberrypi systemd[1]: weewx.service: Consumed 1.148s CPU 
time.
lines 27-49/49 (END)

What do you recommend to me?
Do I reinstall weewx?

суббота, 28 сентября 2024 г. в 22:07:20 UTC+3, Warren Gill: 

> Try setting port to /dev/vantage
> The proper way to configure this up is to map the weewx.conf port setting 
> to what's setup in udev. That way if the serial device gets 
> unplugged/plugged and the usb mapper sends it to a different port, udev 
> will always symlink it to /dev/vantage
>
> If the install worked correctly you should see UDEV rules in 
> /usr/lib/udev/rules.d/60-weewx.rules
> In there you can find this:
> # davis vantage via usb-serial
>
> SUBSYSTEM=="tty",ATTRS{idVendor}=="10c4",ATTRS{idProduct}=="ea60",MODE="0664",GROUP="weewx",SYMLINK+="vantage"
>
> SUBSYSTEM=="tty",ATTRS{idVendor}=="10c4",ATTRS{idProduct}=="ea61",MODE="0664",GROUP="weewx",SYMLINK+="vantage"
>
> Which should match up to what you see in lsusb:
> Bus 001 Device 007: ID 10c4:ea61 Silicon Labs CP210x UART Bridge
>
> On Sat, Sep 28, 2024 at 1:02 AM ANDREI ROZWADOWSKI <[email protected]> 
> wrote:
>
>> I checked RaspPi USB ports:
>>
>> pi@raspberrypi:~ $ sudo lsusb
>> Bus 001 Device 007: ID 10c4:ea61 Silicon Labs CP210x UART Bridge
>> Bus 001 Device 006: ID 03f0:304a HP, Inc Slim Keyboard
>> Bus 001 Device 005: ID 03f0:134a HP, Inc Optical Mouse
>> Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 
>> 802.11n WLAN Adapter
>> Bus 001 Device 003: ID 0424:ec00 Microchip Technology, Inc. (formerly 
>> SMSC) SMSC9512/9514 Fast Ethernet Adapter
>> Bus 001 Device 002: ID 0424:9514 Microchip Technology, Inc. (formerly 
>> SMSC) SMC9514 Hub
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>> After I opened weewx.conf:
>> [Vantage]
>>     # This section is for the Davis Vantage series of weather stations.
>>     
>>     # Connection type: serial or ethernet 
>>     #  serial (the classic VantagePro)
>>     #  ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>>        type = serial
>>     
>>     # If the connection type is serial, a port must be specified:
>>     #   Debian, Ubuntu, Redhat, Fedora, and SuSE:
>>     #     /dev/ttyUSB0 is a common USB port name
>>     #     /dev/ttyS0   is a common serial port name
>>     #   BSD:
>>     #     /dev/cuaU0   is a common serial port name
>>        port = /dev/ttyUSB0
>>     
>>     # If the connection type is ethernet, an IP Address/hostname is 
>> required:
>>     host = 1.2.3.4
>>
>> I don't use any USB-RS232 connector. So it seems to me that "ttyUSB0" is 
>> correctly.
>>
>> Also I've got log:
>> pi@raspberrypi:~ $ journalctl -n 100
>> Sep 28 08:40:54 raspberrypi systemd[892]: Starting 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect...
>> Sep 28 08:40:54 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Control process exited, code=exited, status=1/FAILURE
>> Sep 28 08:40:54 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Failed with result 'exit-code'.
>> Sep 28 08:40:54 raspberrypi systemd[892]: Failed to start 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co>
>> Sep 28 08:40:59 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Scheduled restart job, restart counter is at 24483.
>> Sep 28 08:40:59 raspberrypi systemd[892]: Stopped 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect.
>> Sep 28 08:40:59 raspberrypi systemd[892]: Starting 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect...
>> Sep 28 08:40:59 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Control process exited, code=exited, status=1/FAILURE
>> Sep 28 08:40:59 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Failed with result 'exit-code'.
>> Sep 28 08:40:59 raspberrypi systemd[892]: Failed to start 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co>
>> Sep 28 08:41:04 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Scheduled restart job, restart counter is at 24484.
>> Sep 28 08:41:04 raspberrypi systemd[892]: Stopped 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect.
>> Sep 28 08:41:04 raspberrypi systemd[892]: Starting 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect...
>> Sep 28 08:41:04 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Control process exited, code=exited, status=1/FAILURE
>> Sep 28 08:41:04 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Failed with result 'exit-code'.
>> Sep 28 08:41:04 raspberrypi systemd[892]: Failed to start 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co>
>> Sep 28 08:41:09 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Scheduled restart job, restart counter is at 24485.
>> Sep 28 08:41:09 raspberrypi systemd[892]: Stopped 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect.
>> Sep 28 08:41:09 raspberrypi systemd[892]: Starting 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect...
>> Sep 28 08:41:09 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Control process exited, code=exited, status=1/FAILURE
>> Sep 28 08:41:09 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Failed with result 'exit-code'.
>> Sep 28 08:41:09 raspberrypi systemd[892]: Failed to start 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co>
>> Sep 28 08:41:15 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Scheduled restart job, restart counter is at 24486.
>> Sep 28 08:41:15 raspberrypi systemd[892]: Stopped 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect.
>> Sep 28 08:41:15 raspberrypi systemd[892]: Starting 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Connect...
>> Sep 28 08:41:15 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Control process exited, code=exited, status=1/FAILURE
>> Sep 28 08:41:15 raspberrypi systemd[892]: rpi-connect-wayvnc.service: 
>> Failed with result 'exit-code'.
>> Sep 28 08:41:15 raspberrypi systemd[892]: Failed to start 
>> rpi-connect-wayvnc.service - WayVNC process used by Raspberry Pi Co>
>>
>> Unfortunately I don't receive data from Vantage Pro2
>> пятница, 27 сентября 2024 г. в 13:30:54 UTC+3, Ho Lee Fooks: 
>>
>>> Currently using Pi OS lite 64-bit Debian Bookworm port with a pip 
>>> install after a SD card failure.
>>>
>>> On Fri, Sep 27, 2024, 02:27 vince <[email protected]> wrote:
>>>
>>>> Again - we need to see your logfile please.   Also need to see your 
>>>> [Vantage] section from weewx.conf.  As Tom said, your logfile seems to 
>>>> indicate that you are trying to connect to a port that does not exist on 
>>>> your system.
>>>>
>>>> Mine on a raspberry pi looks like this for a VP2 connected to the pi4.
>>>>
>>>> [Vantage]
>>>>     # This section is for the Davis Vantage series of weather stations.
>>>>
>>>>     # Connection type: serial or ethernet
>>>>     #  serial (the classic VantagePro)
>>>>     #  ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>>>>     type = serial
>>>>     port = */dev/ttyUSB0*
>>>>
>>>> You might want to run the "lsusb" and "dmesg" command to see what 
>>>> devices are on your USB bus.
>>>>
>>>> pi@pi4:~$ lsusb
>>>> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>>>> *Bus 001 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 
>>>> Serial Port / Mobile Action MA-8910P*
>>>> Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>
>>>> pi@pi4:~$ dmesg|grep USB
>>>> [    1.494727] xhci_hcd 0000:01:00.0: new USB bus registered, assigned 
>>>> bus number 1
>>>> [    1.496256] xhci_hcd 0000:01:00.0: new USB bus registered, assigned 
>>>> bus number 2
>>>> [    1.496291] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
>>>> [    1.496652] usb usb1: New USB device found, idVendor=1d6b, 
>>>> idProduct=0002, bcdDevice= 6.01
>>>> [    1.496688] usb usb1: New USB device strings: Mfr=3, Product=2, 
>>>> SerialNumber=1
>>>> [    1.497522] hub 1-0:1.0: USB hub found
>>>> [    1.498604] usb usb2: New USB device found, idVendor=1d6b, 
>>>> idProduct=0003, bcdDevice= 6.01
>>>> [    1.498640] usb usb2: New USB device strings: Mfr=3, Product=2, 
>>>> SerialNumber=1
>>>> [    1.499393] hub 2-0:1.0: USB hub found
>>>> [    1.513632] usbhid: USB HID core driver
>>>> [    1.751480] usb 1-1: new high-speed USB device number 2 using 
>>>> xhci_hcd
>>>> [    1.902082] usb 1-1: New USB device found, idVendor=2109, 
>>>> idProduct=3431, bcdDevice= 4.21
>>>> [    1.902145] usb 1-1: New USB device strings: Mfr=0, Product=1, 
>>>> SerialNumber=0
>>>> [    1.902172] usb 1-1: Product: USB2.0 Hub
>>>> [    1.904186] hub 1-1:1.0: USB hub found
>>>> [    2.199479] usb 1-1.2: new full-speed USB device number 3 using 
>>>> xhci_hcd
>>>> [    2.303884] usb 1-1.2: New USB device found, idVendor=067b, 
>>>> idProduct=2303, bcdDevice= 3.00
>>>> [    2.303945] usb 1-1.2: New USB device strings: Mfr=1, Product=2, 
>>>> SerialNumber=0
>>>> [    2.303973] usb 1-1.2: Product: USB-Serial Controller
>>>> [    7.708729] usbserial: USB Serial support registered for generic
>>>> [    7.735802] usbserial: USB Serial support registered for pl2303
>>>> *[    7.801504] usb 1-1.2: pl2303 converter now attached to ttyUSB0*
>>>>
>>>> My VP2 is connected by a serial2usb connector to the pi, so it shows up 
>>>> as the only device attached to the pi as reported by lsusb, and the dmesg 
>>>> command shows that it is allocated /dev/ttyUSB0, which is what matches my 
>>>> setup.
>>>>
>>>> On Thursday, September 26, 2024 at 9:51:36 PM UTC-7 ANDREI ROZWADOWSKI 
>>>> wrote:
>>>>
>>>>> Thanks for the tip.
>>>>> I will also try to reinstall the OS.
>>>>> Please tell me, 
>>>>> Does Weewx support 64-bit OS?
>>>>>
>>>>> пятница, 27 сентября 2024 г. в 02:07:48 UTC+3, Ho Lee Fooks: 
>>>>>
>>>>>> journalctl -n 100
>>>>>> Shows the last 100 lines.
>>>>>>
>>>>>> On Thu, Sep 26, 2024, 18:31 Ho Lee Fooks <[email protected]> wrote:
>>>>>>
>>>>>>> Reinstalling weewx, I wondered where the log was as well. It may be 
>>>>>>> replaced with a binary log named journal. I found a README that 
>>>>>>> explains 
>>>>>>> more.
>>>>>>>
>>>>>>> On Thu, Sep 26, 2024, 10:59 '[email protected]' via weewx-user <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> Maybe your log is elsewhere: 
>>>>>>>> https://weewx.com/docs/5.1/usersguide/where/
>>>>>>>>
>>>>>>>> ANDREI ROZWADOWSKI schrieb am Donnerstag, 26. September 2024 um 
>>>>>>>> 16:33:55 UTC+2:
>>>>>>>>
>>>>>>>>> As for link 
>>>>>>>>> https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user#how-to-get-a-good-useful-log
>>>>>>>>> I've got the following results:
>>>>>>>>>
>>>>>>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog | tee 
>>>>>>>>> /var/tmp/mylog
>>>>>>>>> tail: cannot open '/var/log/syslog' for reading: No such file or 
>>>>>>>>> directory
>>>>>>>>> tail: no files remaining
>>>>>>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog
>>>>>>>>> tail: cannot open '/var/log/syslog' for reading: No such file or 
>>>>>>>>> directory
>>>>>>>>> tail: no files remaining
>>>>>>>>> pi@raspberrypi:~ $ 
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> четверг, 26 сентября 2024 г. в 17:29:07 UTC+3, ANDREI ROZWADOWSKI: 
>>>>>>>>>
>>>>>>>>>> Good evening!
>>>>>>>>>> Below is the log file for Raspberry Pi 3B (OS Bullseye)
>>>>>>>>>> The latest results on the charts (in the folder: /var/www/html/
>>>>>>>>>> www ) which I received are dated 09/25/2024, 06:15:00 PM
>>>>>>>>>>
>>>>>>>>>> pi@raspberrypi:~ $ sudo journalctl -u weewx
>>>>>>>>>> Sep 24 11:52:40 raspberrypi systemd[1]: Started weewx.service - 
>>>>>>>>>> WeeWX.
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: 
>>>>>>>>>> Initializing weewxd version 5.1.0
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Command 
>>>>>>>>>> line: /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Using 
>>>>>>>>>> Python: 3.11.2 (main, Aug 26 2024, 07:20:54) [GCC 12.2.0]
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Located 
>>>>>>>>>> at:   /usr/bin/python3
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: 
>>>>>>>>>> Platform:     Linux-6.6.47+rpt-rpi-v7-armv7l-with-glibc2.36
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Locale: 
>>>>>>>>>>       'en_US.UTF-8'
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Entry 
>>>>>>>>>> path:   /usr/share/weewx/weewxd.py
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: 
>>>>>>>>>> WEEWX_ROOT:   /etc/weewx
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Config 
>>>>>>>>>> file:  /etc/weewx/weewx.conf
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: User 
>>>>>>>>>> module:  /etc/weewx/bin/user
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Debug:   
>>>>>>>>>>      0
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: User:   
>>>>>>>>>>       weewx
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Group:   
>>>>>>>>>>      weewx
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO __main__: Groups: 
>>>>>>>>>>       weewx
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: INFO weewx.engine: 
>>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage)
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: ERROR weewx.engine: 
>>>>>>>>>> Import of driver failed: [Errno 2] could not open port /dev/tty>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****  Traceback (most recent call last):
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****    File "/usr/lib/python3/dist-packages/serial/seri>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****      self.fd = os.open(self.portstr, os.O_RDWR | os>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****  FileNotFoundError: [Errno 2] No such file or direc>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****  During handling of the above exception, another ex>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****  Traceback (most recent call last):
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****    File "/usr/share/weewx/weewx/engine.py", line 11>
>>>>>>>>>> Sep 24 11:52:40 raspberrypi weewxd[3034]: CRITICAL weewx.engine: 
>>>>>>>>>>     ****      self.console = loader_function(config_dict, se>
>>>>>>>>>> lines 1-28
>>>>>>>>>> среда, 25 сентября 2024 г. в 23:24:13 UTC+3, Tom Keffer: 
>>>>>>>>>>
>>>>>>>>>>> I don't know what you mean by "registration". Do you mean 
>>>>>>>>>>> station registration so it shows on this map 
>>>>>>>>>>> <https://www.weewx.com/stations.html>? Or, something else?
>>>>>>>>>>>
>>>>>>>>>>> In any case, it's almost impossible to diagnose what's happening 
>>>>>>>>>>> without a log. See the section *How to get a good, useful log 
>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user#how-to-get-a-good-useful-log>*
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Sep 25, 2024 at 11:12 AM ANDREY <[email protected]> 
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Good evening!
>>>>>>>>>>>>
>>>>>>>>>>>> I use meteostation Davis Vantage Pro2 with Raspberry Pi 2B 
>>>>>>>>>>>> since 2022.
>>>>>>>>>>>> Its operation system is Raspbian Buster (because I use AnyDesk 
>>>>>>>>>>>> for the remote access).
>>>>>>>>>>>> Since June 2024, data registration has interrupted.
>>>>>>>>>>>> It worked only some hours.
>>>>>>>>>>>> I was reinstalling the operating system (Raspbian Buster).
>>>>>>>>>>>> I replaced the board on a Raspberry Pi 3B with Raspbian 
>>>>>>>>>>>> Bullseye.
>>>>>>>>>>>> But I see the graphics with results for some hours.
>>>>>>>>>>>> After that the registration is stopped.
>>>>>>>>>>>> Why?
>>>>>>>>>>>>
>>>>>>>>>>>> -- 
>>>>>>>>>>>> You received this message because you are subscribed to the 
>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from 
>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>> To view this discussion on the web visit 
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/77b03b34-495e-43aa-9f12-f9cfada246cdn%40googlegroups.com
>>>>>>>>>>>>  
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/77b03b34-495e-43aa-9f12-f9cfada246cdn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>> -- 
>>>>>>>> You received this message because you are subscribed to the Google 
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>>>> send an email to [email protected].
>>>>>>>> To view this discussion on the web visit 
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/dd7e77cf-2234-409d-92aa-53fae15de8a4n%40googlegroups.com
>>>>>>>>  
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/dd7e77cf-2234-409d-92aa-53fae15de8a4n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>>
>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/weewx-user/d90ffe5b-057e-4614-8687-ae199a9c7f17n%40googlegroups.com
>>>>  
>>>> <https://groups.google.com/d/msgid/weewx-user/d90ffe5b-057e-4614-8687-ae199a9c7f17n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>>
> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/ac42315c-18a1-410c-9da2-64442d9031c0n%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/ac42315c-18a1-410c-9da2-64442d9031c0n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4034faa8-36b4-47c4-84b7-47dff66a0c59n%40googlegroups.com.

Reply via email to