The GW1000 driver will not work with the WS2910 console This console works perfectly with the interceptor driver
https://github.com/matthewwall/weewx-interceptor Regards El lunes, 30 de septiembre de 2024 a las 18:49:51 UTC+2, vince escribió: > Colin try the gw1000 (aka ecowitt) driver and see if your console/gateway > is detected. > Just follow the instructions on the driver's page. > > https://github.com/gjr80/weewx-gw1000 > > [GW1000] > # This section is for the Ecowitt Gateway driver. > > # How often to poll the API, default is every 20 seconds: > poll_interval = 20 > > # The driver to use: > driver = user.gw1000 > ip_address = 192.168.2.87 # <=== set this to the ip address of your > console > port = 45000 > > On Monday, September 30, 2024 at 6:11:04 AM UTC-7 Colin Lloyd wrote: > >> I've installed WEEWX successfully on my Linux Mint 21 PC. And the web >> page at file:///var/www/html/weewx/index.html works OK. >> >> reply from sudo systemctl status weewx gives: >> >> weewx.service - WeeWX >> Loaded: loaded (/lib/systemd/system/weewx.service; enabled; vendor >> preset: enabled) >> Active: failed (Result: exit-code) since Mon 2024-09-30 10:44:45 >> BST; 1h 1min ago >> Docs: https://weewx.com/docs >> Process: 2214 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited, >> status=4) >> Main PID: 2214 (code=exited, status=4) >> CPU: 56ms >> >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >> return FineOffsetUSB(**config_dict[DRIVER_NAME]) >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >> File "/usr/share/weewx/weewx/drivers/fousb.py", line 967, in __init__ >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >> self.openPort() >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >> File "/usr/share/weewx/weewx/drivers/fousb.py", line 1022, in openPort >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >> raise weewx.WeeWxIOError("Unable to find USB device") >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >> weewx.WeeWxIOError: Unable to find USB device >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL __main__: Unable to load >> driver: Unable to find USB device >> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL __main__: **** >> Exiting... >> Sep 30 10:44:45 colin-PC systemd[1]: weewx.service: Main process exited, >> code=exited, status=4/NOPERMISSION >> Sep 30 10:44:45 colin-PC systemd[1]: weewx.service: Failed with result >> 'exit-code'. >> >> In /etc/weewx/weewx.conf the driver is set to FineOffsetUSB - which >> pointed to the (to me) most relevant station to my ECOWITT WS2910 station. >> But the ECOWITT is a WiFi station - not USB. So I suspect I have linked up >> with the wrong driver. Can anyone tell me which driver or clone system to >> my ECOWITT I should be using. This is my first entry into commercial >> weather stations having created my own Arduino or Raspberry Pi versions in >> the past - so am a bit lost. >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1f110389-5c37-4618-8719-643ff71a3b3bn%40googlegroups.com.
